[ QUOTE ]
BugLightGeek said:
[ QUOTE ]
Braddah_Bill said:
Is that the Z-52 LOTC for the E1e/E2e lights? If so send me the tail cap and the McES2 kit.......I did 3 tail caps of my own.....for my KL4, E1e/kl1 and E2e/kl1 /ubbthreads/images/graemlins/smile.gif
Make sure you send it with delivery confirmation....you know the drill...not responsible if lost in the mail.
Aloha,
Bill
[/ QUOTE ]
Is
this the item you're referring to?
Will I need anything else (besides the resistor amount)?
[/ QUOTE ]
Yep thats the one...........you stated that the tail cap was mint so you don't need another rubber boot.
Know and understand that the McES2 2 stages are best suited for LED lights and not incandescent.....selecting the resistor is a personal choice as each board will give different results on different heads. I bought a 30 Ohm for my L4 with 2 X 123s and was not happy with the output, so I ended up getting a 22 Ohm which I really like.
I would suggest you go to the McGizmo forum and read the McES2 thread,then maybe even ask for feedback on what setup you are thinking about running ( KL4 or KL1 on a E1e or E2e body with regular or rechargeable 123s ).
When you are ready..... Email me from my profile. I'll do it for the cost of return postage ( approx. $5.00 ).
Please note....If you do send the tail cap and kit to me at least send it with delivery confirmation....insured would be even better, that way we both will be protected. I know from the JEERS section you already have one nightmare on you hands, which I _hope_ gets resolved.
Aloha,
Bill