Olympia Products
Page 5 of 5 FirstFirst 12345
Results 121 to 148 of 148

Thread: * * * *Now at the Shoppe 2. Here's what's new.

  1. #121

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    The purpose of this thread is to announce new products as they become available. It is meant to easily see what is coming and what has been added to the Shoppe.

    I would like to keep this thread limited to these announcement so people can see the new points of interest in a fast, at a glance way.

    It is not for question posting. Please post in another thread or start your own.

    Thanks

    Cindy

  2. #122

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    McClicky2 is the new McClicky with 2 holes on top made for the McClickie pak. Works in the Aleph Tailcap as well.
    Ti Clip for the Sundrop
    Convex Lens for the SunDrop


    May 2013 We are getting more Kroll Switches. ETA End of June
    Last edited by Ms_SS; 05-18-2013 at 06:36 PM.

  3. #123

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    All Remora UIs purchased after June 30, 2009 have been re-programmed for 3-levels only, no SOS.

    The Remora UI has been reprogrammed to eliminate the SOS flash state.

  4. #124

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    MagClick Tailcap for the Mag C

    Modamag's Black tailcap with a McClicky switch designed for the Mag C
    Works with AW's C cell aka IMR26500

  5. #125

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Flexible "Gooseneck" Stock Line

    Single piece 6 inch flexible steel tubing with black vinyl coating and is threaded at both ends.
    Dimensions: 0.36"OD x 6.0" long with 1/8-27 mbe threaded ends
    Overall dim: 6.625" x .5"

    Ready to use for task lighting and on fixed lighting parts.

  6. #126

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by Ms_SS View Post
    MagClick Tailcap for the Mag C

    Modamag's Black tailcap with a McClicky switch designed for the Mag C
    Works with AW's C cell aka IMR26500
    AW's IMR26500 cells do not fit into a stock "C" maglite. They are to slightly to large (Diameter)

    Just a heads up.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  7. #127

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Seoul XR Can

    Seoul MCPCB

    The Seoul Can and MCPCB look similar to the XR can and MCPCB.

    Dimensions differ.
    Last edited by Ms_SS; 03-04-2010 at 02:56 AM.

  8. #128
    Flashaholic*
    darkzero's Avatar
    Join Date
    Oct 2003
    Location
    SoCal
    Posts
    4,418

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by Ms_SS View Post
    Pics?
    -Will-

    Sorry, I have retired from flashlight modding & I do not make custom flashlights. Thank you for your understanding.

    My Mod Archive

  9. #129

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Hi,

    Is the McClicky2 switch compatible with the Surefire C/G/Z series tailcaps?

    Thanks

  10. #130
    Flashaholic* nein166's Avatar
    Join Date
    Feb 2006
    Location
    New York
    Posts
    1,387

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by kimck99 View Post
    Hi,

    Is the McClicky2 switch compatible with the Surefire C/G/Z series tailcaps?

    Thanks
    It won't thread in by itself
    Check out the brass McClicky Switch upgrade for C/G/Z tailcaps
    And the McClicky2 is identical to McClicky with the addition of 2 holes on the topside.

  11. #131

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by nein166 View Post
    It won't thread in by itself
    Check out the brass McClicky Switch upgrade for C/G/Z tailcaps
    And the McClicky2 is identical to McClicky with the addition of 2 holes on the topside.
    Thanks nein166,

    I didn't realize that the diameter of the McClicky was smaller than the diameter of the Z41 tailcap thus needing a sleeve.

    Much appreciated.

  12. #132

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    GDuP HIGH Output Converter (with OPTIONS) NEW

    Runs up to 1200mA

    The original GDuP is the mizer version ~700mA

    Both GDuPs have options to customize levels. $9.00 each plus a text box to declare values.

    When ordering be sure to log in first before choosing items with options. You will lose the options in your cart if you log in later. If this happens, delete the former part and add the desired part with all options. Don't forget to add labor (solder, ream, etc) value.


  13. #133

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    The GDuP high output 3 level driver runs the more high powered multi-die LED, like Osram quite nicely.

  14. #134

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We have more M2 Light Orange Peel reflectors (LOP)

  15. #135

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    NEW:
    ** Arctic Alumina Thermal Adhesive (AATA) Medium Cure 7g set -15 minute working time
    The original AAA is the AATA Quick cure with a 5 minute working time
    ** Ceramique2 - 25g tube

    Do people want AATA slow cure - 60 minute working time?
    Last edited by Ms_SS; 08-28-2011 at 01:36 PM.

  16. #136
    Flashaholic
    Join Date
    Jan 2005
    Location
    California, CA
    Posts
    148

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by Ms_SS View Post
    NEW:
    ** Arctic Alumina Thermal Adhesive (AATA) Medium Cure 7g set -15 minute working time
    The original AAA is the AATA Quick cure with a 5 minute working time
    ** Ceramique2 - 25g tube

    Do people want AATA slow cure - 60 minute working time?
    15 min seems fine to me. In fact I am about to order some from you.
    In essentials, unity;
    In non-essentials, freedom;
    In all things, charity. Meldenius.

  17. #137

  18. #138
    Flashaholic brandocommando's Avatar
    Join Date
    Mar 2011
    Location
    Oregon
    Posts
    437

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Just ordered a McR-19XR reflector (top secret project,) some AATA, and some AS5.

    Thanks!


    P.S. I think I ordered the last AATA...

  19. #139

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We are adding a new Category to the Shoppe
    Non-Custom Lights & Stuff

    Generic flashlights, accessories and other items as they come in

  20. #140

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We are adding a new Category to the Shoppe
    Non-Custom Lights & Stuff

    Generic flashlights, accessories and other items as they come in

  21. #141

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We have added a new category to the Sandwich Shoppe. Non-Custom Lights & Stuff
    We will offer non-Custom lights and parts to broaden our inventory.

    We have received a few samples which are listed under Non-Custom Lights & Stuff
    Last edited by Ms_SS; 02-19-2012 at 12:38 PM.

  22. #142
    Flashaholic* hank's Avatar
    Join Date
    Apr 2001
    Location
    Berkeley CA
    Posts
    1,535

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    > samples which are listed under Non-Custom Lights & Stuff

    looking forward to details -- what's in those new 1xAAA lights, for example?

  23. #143

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    I don't have specs for the LED nor driver. It's a nice single AAA light 1xAAA lights

  24. #144

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We are having a run of the original Kroll Switch made. The sample fits the Minimag.

    ETA end of June.
    Last edited by Ms_SS; 05-18-2013 at 06:33 PM.

  25. #145

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    The Kroll switch is back. We had them built to the "original" specifications.

    I have enabled them on the Sandwich Shoppe. "LOWER PRICES"
    Last edited by Ms_SS; 12-01-2013 at 05:29 PM.

  26. #146

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    We have taken in a batch of remaining Aleph parts for Black anodizing.

    They should be available at the Sandwich Shoppe in the next couple weeks.
    Last edited by Ms_SS; 12-01-2013 at 05:29 PM.

  27. #147
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,170

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    Quote Originally Posted by Ms_SS View Post
    We have taken in a batch of remaining Aleph parts for Black anodizing.

    They should be available at the Sandwich Shoppe in the next couple weeks.
    Will there be another post here, when they are available ... ?
    IF 2 = 1 THEN 1 = 0

  28. #148
    Flashaholic*
    Join Date
    May 2009
    Location
    Canada
    Posts
    851

    Default Re: * * * *Now at the Shoppe 2. Here's what's new.

    They are up! Just picked up the Aleph 3 head I wanted.

    eala

Page 5 of 5 FirstFirst 12345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •