=== The Great Sale ===

[4sevens]

I'm interested in the mini2hid host... is it bored out to accept the
solarc 10w hid ballast? Also, is the stock switch still there or must
I modify the tailcap into a switch? One more... is it 1d or 2d size?
thanks

[NotEnoughLight]

Consider the blue and silver magSD sold! Payment sent!!

But now i am and its all your fault Jonathan... well... in a good way of course.

[DFiorentino]

Received my Mag1C and battery adapters the other day. Completely awesome !

Do you have any left I could relieve from you? I'll take any color at this point. If not, that's ok.

If this is still available, I'll take it.

MagSD (body only) ... $15
1x jade green

-DF

[ktronik]

Please may I have:

4/PTS-D ... $11/each=$44
Mag1C (cutdown) ... $30/each=$60
1x pewter
1x black


Please confim stock & total, including shipping to Australia...& I will paypal you...

thanks

ktronik

I Hope I ordered right...Hey Modamag, you still got some of this stuff??

Thanks

Ktronik

[modamag]

All sorry for the late reply. Just had too much fun with JimH & CromagNet. We got to keep these meeting to less than the 6 hrs and/or 2AM limitation.

Hookd_On_Photons: You might need some of Emilion's magnet to for the nipple to make a good contact. Or if you're tight on cash then just grab a 4-40 bolt which should work just as well.

DFiorentino: Only got 1x jade green MagSD left. If you want it it's yours.

Starlight: USL sockets are able to make Mag74 | Mag85. Battery holders are also available along with the bulbs you need. I don't have the reflector or any lens available. Your reservation of the bored black Mag3D is noted.

alauda: packaged and ready to ship.

ktronik: only 1x pewter Mag1C left. Here's your total.
4x PTS-D ... $44
1x Pewter Mag1C ... $30
GPM Flat envelope S&H ... $9
total = $83

4sevens: The Mini2HID body is bored out to accept Solarc/WA 10W ballast. There is NO stock switch for MiniHID or Mini2HID. These use the tailcap switch. Note this is just the body (battery tube) only, the tailcap/head is MIA. It's a great candidate for a HAIII Mini2HID.

[Hookd_On_Photons]

Paypal sent for eight CBP 1650 AA batteries (Total: $16)

[ktronik]

Paypal sent...

Thanks

Ktronik

[DFiorentino]

DFiorentino: Only got 1x jade green MagSD left. If you want it it's yours.

Thanks!
-DF

[SoCal80]

I am interested in the Mag1C (Cutdown). PM Sent.

[Starlight]

Modamag,
Please answer the questions in my post, or answer the PM I sent you, so that we can get on with this transaction.
Thanks, starlight

[Starlight]

Bump. Calling Modamag!

[Radio]

Peak McKinley 3 HAIII (NIB) ... $30
- out of production collector's item
Peak Kilinmanjaro 3 HAIII (NIB) ... $30
- out of production collector's item

Are these still available, let me know so I can PP

[DFiorentino]

God my battery adapters and MagSD last night. the MagSD is smaller than I expected which is totally cool !

Thanks again!
-DF

[modamag]

StarLight: Friend, your question have been answered several times already. Maybe my English is not so good. Let me rephrase.

1. Can a USL socket be used in a mag to make a 2D-1274 or 3D-1185 light?
YES!

2. I have a turnkey 1274 with the KUI socket. If so, could you do the installation before you send it?
If you already have KIU's socket then you don't need this. They are similar in application, with the exception that the ceramic socket in the USL can handle up to 1000W.

3. Are your battery holders available for sale along with the other parts?
YES!

4. If the answers to the above questions are yes, I need to reserve the 3D black body, a USL socket, a pair of 1185 bi-pin bulbs, a 12 cell battery holder, and reflector and lens if available.
All except for reflector & lens have been reserved for you

[Starlight]

Modamag, Sorry, we are having a "failure to communicate". What I mean is, if I buy the USL socket and a 3D body, can you install the USL socket in the 3D body before you send them. Forget my rambling about what I already have.

[modamag]

Sure, I can install it.
I just need to know the targeted bulb so I can adjust the height properly

[Starlight]

Ok, let's set the USL socket for an 1185.

3D mag body $40
(2) 1185 bi-pin bulbs $13
12AA-3D battery holder $22
USL socket (sorry can't find price)
Shipping $5

Give me the price on the USL socket again, and I will send paypal right away.
Thanks

[juancho]

Modamag,
one pewter 3 D bored $40.00
one green 3 D bored 40.00
two Modamag 12 batt.adapter 44.00
two dummy AA battery 10.00

SHIPPING 6.00

Total $140.00

Pay Pal incoming

[alauda]

Just to let you know everything arrived safe and sound in the UK.

Many thanks

Tony

[Hookd_On_Photons]

Got the batteries today, thanks.

They do make quite a bit of difference, compared to Energizer 2100 NiMHs, when used to power Welch-Allyn 01185 and Pelican Big D hi-output bulbs.

Got any more CBP1650s?

[Starlight]

Bump.

[Starlight]

Paypal sent.

[Jon_L]

Hi Modag:

I'd like to have three pairs of WA1111 please.

[DFiorentino]

for the following:

1x 10W Ballast & 4x 10W SEL bulbs ... $140
Silver Mini2HID body ... $20
1x 8AA-2D / Series / 9.6V ... $18

Second for 1 x4AA-1D / Parallel ... $18 that I forgot to add the first time .

Thanks.
-DF

[jashhash]

DFiorentino beat me to it... bah.

[cratz2]

I'm wanting to build a 3x1W Tri light using RW0H stars in a D Mag... What is the difference between the following two items?

Also, you wouldn't happen to have any spare 20mm IMSs, would you?

PTS-D-TypeO ... $8/each
PTS-D ... $11/each

[elfen1]

I'd like 1 PTS-D P.M> to be sent shortly.

elfen1 PTS-D $11.00

[bbaker22]

Paypal sent for PTS-D

Thanks!
baker

[elfen1]

Ok I'm going to take:

(1) 8AA-2D Series /10.8 V $18
(1) PTS-D $11
(3) SO20XA relfectors $13
42X4%=1.68
Total $43.68

P.M SENT

[nemul]

any PTS-C for reflectors?