Hi folks,
Here are what you asked for.
3.5" head and reflector machined from one piece hi grade aluminum bar. There is no replaceable reflector. Advantages are:
1- Less cost.
2- Light weight.
3- Maximum heat transfering. There in no air gap between body and reflector. Fins are directly attached to cammed reflector.
3- Easily switchable from M*g D to M*g C and both adapters come with it.
I have made this proto sample and tested.
Bulb opening is 10mm and this will be usable with all WA and 35W Philips bulbs.
Reflector is cammed and can be used with Hi-temp Bi-pin socket for easy beam adjustment from spot to flood.
It comes everything needed including 2 adapters (one for D and one for C), bezel, 2 Orings and Hi temp Boro lens installed and ready to use.
This prepayment thread is open now and no part is available for immediate delivery. Thread will be closed for payment by 11.59PM December 31 2005 PST (please check post #84)
No payment will be accepted after that point and production will start early January 2006
Complete processing will take at least 3 months. Machining, hand polishing in and out, outside finishing, reflector metalizing and assembling.
Delivery will be started in order payment was received and destination.
It can be ordered in chrome plated finish or grey HA type III and reflector can be ordered in SMO mirrorized (for maximum throw) or light stippled (for softer beam shape) only.
This is a go project regardless of interest number.
Price:
HA type III $190
Chrome plated $230
Shipping:
All 50 States $10
Internationaly $18
Your order will be considered if full payment received in one paypal.
Please do not combine with any other product I currently offer.
You will need to post your order here and in paypal including your CPF handle and detail of your order.
Example:
for HA III 3.5" head with SMO reflector.
Paypal to: DO NOT PAY
Sorry, I do not accept any other type of payment.
Any comment welcome.
Last edited: