Test

[HgRyu]

BitZ Pocket Titanium


I finally got all parts for BitZ Pocket TI and am assembling flashlight now.
I will start shipment of flashlight from end of next week. So I open this thread for sale.



Specification

• Material : Solid Titanium bezel, head and body
• Finish : Bare Titanium (have some minor scratches), Glossy Blast (recommended)
• Lens : Sapphire Crystal Glass, optical grade
• LED : SSC P4 U2 bin
• Driver : Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
• Reflector : High quality Orange Peel aluminium reflector
• O-ring sealed Twist On-Off (no battery rattle)
• Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
• Dimension: Diameter 21mm, Overall Length 72mm
• Accessories : Titanium Pocket Clip, 2 Split Rings (one stainless steel, one brass)
• Tritium hole for 1.5mm X 6.5mm (No tritium included)
• Pocket Ti have modular led system so you can upgrade led or led module youself later.
• No commercial packing

Driver and Brightness levels, Hidden Signals

• BitZ Pocket use Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, LED will not be damaged by unregulated high current from Li-Ion battery. Off course, birightness by regular 3V CR123A and 3.6V rechargeable Li-Ion battery will be same.
• Input voltage range : 1.8V ~ 5.5V
• There are basic 3 Brightness levels (Medium-Low-High) and hidden 4 Signals (Strobe-Locater-Extreme Low-S.O.S.)
• Brightness (estimated) : High (120~130lumen), Medium (30~40lumen), low (10lumen)
• Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
• Rumtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
• Runtime for Signal mode (RCR123A, CR123A) : Strobe (8, 12 hours), Locater (24, 36 hours), Ext.Low (45, 70 hours), S.O.S. (8, 12 hours)
• Basic 3 brightness levels has Memory Function. You will get next level by Off and On within two seconds.
• You will get into Signals by consecutive 8 On and Off. No memory function for Signal.
• Locater signal : useful mode for tracking and camping as "follow me" signal or location signal.
• Extreme Low : This mode is useful as a overnight candle at tent. Current to LED is 10mA.

Caution : Do not use pocket clip for belt. Pocket clip don't have enough strength(tention) and room for thick leather belt, use clip just for thin fabric pocket.




Price and terms,

1. Price U$215, Payment by Paypal to paypal(at)bitz(dot)kr
2. Shipping via airmail to everywhere at U$5.
   I'll ship via registered airmail if your post office have tracking service. (not available to USA, USPS don't have airmail tracking)
   If you want shipment via EMS(tracking), actual shipping cost will be applied (FYR, cost will be U$22 to US, U$20 to Europe, U$15 to Japan and China.
3. Please mark your (CPF ID) and (Bare or glossy blast) on paypal message

Some pictures (Glossy Blast finish)

Runtime Graph,

Thanks.