I bought a used 250 watt high pressure sodium warehouse light type fixture. I plan on making a really big spotlight with it. (28,500 lumens ) I was told that an HPS fixture needs to be completely enclosed because the bulbs can explode. Is this true?? Also, do I need to be careful to keep all fingerprints off of the bulb?
__________________
I got a fever and the only prescription is more cowbell.
HPS (Or to give it its correct prefix SON) bulbs should be treated with respect - but not to the extent of being terrified of them as with some of the compact metal halide ones or quartz-halogen incandescents.
The outer bulb of most SON lamps is normal glass - and is there specifically to protect the arc tube (which is made of polycrystalline alumina by the way) from the atmosphere, and to prevent the seals from oxidising.
Contrary to the name, the arc tube is actually well below atmospheric pressure, and the outer's under a hard vacuum. The worst thing a SON lamp's likely to do is crack and die if dropped. They're not likely to explode. I've seen several now where the inner arc tube's ruptured, but not done anything to the outer. A huge number of SON fixtures have open or wire mesh fronts. These bulbs are pretty safe.
The high pressure part referrs to the elecrical loading of the arc I believe. Though the gas filling is of a higher pressure than of the low pressure (SO/SOX/SLI) types.
As with all lamps, treat it with respect, but no need to be afraid of this one.
High Pressure Sodium lights?
) I was told that an HPS fixture needs to be completely enclosed because the bulbs can explode. Is this true?? Also, do I need to be careful to keep all fingerprints off of the bulb?
Linear Mode
