Recent content by kamyk
- K
flood reflector needed
They are 35W HID and I hope that don't go out of production Thanks Guys for advice, i'll try a diffuser and/or moving the lamp a bit forward or backword compared to the reflector Let You know- kamyk
- Post #4
- Forum: Dive Lighting
- K
flood reflector needed
Hi I just bought used bargain price Fa-Mi SLIM9-HID30-110 One of the head has a flood reflector and gives a nice flood beam. Second one has a reflector that gives a tight beam with concentrated center, and is not good for filming, because center is overexposured. Is it possible to buy flood...- kamyk
- Thread
- Replies: 3
- Forum: Dive Lighting
- K
Video light project based on Sony HVL-80DA
hmmm So You suggest that led is not good option with plastic body, but if I'll use hid with metal reflector, a lot of heat will go through lens. Is it acceptable heating solution? So I need 35/50W HID, is it possible to put everything in my body? for example this or similar?- kamyk
- Post #6
- Forum: Dive Lighting
- K
Video light project based on Sony HVL-80DA
Packhorse You make me sad, heh Like I think, heating is the biggest problem. Single SST-90/50 with or without a 44mm aspheric sounds ok, max 2250/1250 lumens still acceptable. No heating problem with this leds? Thermal switch is a good option, but I don't want to stop filming after 15 min in the...- kamyk
- Post #3
- Forum: Dive Lighting
- K
Video light project based on Sony HVL-80DA
Hi guys I'm a absolute beginer. I read what You doing, and it's amazing. I have two video lights Sony HVL-80DA. My plan is make a powerfull video pack. I was thinking about HID and Led, decide to make a Led version (correct me if I select wrong way). Pictures below shows what i based on...- kamyk
- Thread
- Replies: 6
- Forum: Dive Lighting
- K
Problem witch Diving Cree SSC-P7-C-SXO 3-Mode 900-Lumen
baywatch106 I found the article you wrote about, thanks It flooded at salt water. When I get off the boat, rinse all with fresh water. After 12 hours when back home I put everything to bowl of fresh water (cold), and left for 3 days. Now when I twist everything properly, when twist to start is...- kamyk
- Post #5
- Forum: Dive Lighting
- K
Problem witch Diving Cree SSC-P7-C-SXO 3-Mode 900-Lumen
Hi I bought Diving Cree SSC-P7-C-SXO 3-Mode 900-Lumen LED Flashlight Kit (2*18650/4*CR123A/4*16340) Works fine until flooded, probably my fine, do not twist properly or shitty o-rings. Now when I want to turn on, there is only single flash. Is there any simple solution (replace part) to fix...- kamyk
- Thread
- Replies: 7
- Forum: Dive Lighting
- K
Welcome all divers!
Hi I've been diving for about 2,5 years and done 150+ dives, actually doing divemaster and thinking about technical diving. I have some very simple lights (UK C4 and C8) and flooded Diving Cree SSC-P7-C-SXO 3-Mode 900-Lumen, heh. I am hoping to design my own video light.- kamyk
- Post #40
- Forum: Dive Lighting
