Recent content by upsidedownviking

  1. upsidedownviking

    Component specifications, replacement parts & repair guides

    Anyone know the name or where to get the straight outer wall reflector that's in the XML-EDC or SST-50 EDC? thanks! Says somewhere MCR20 but other references to that reflector have a stepped outer wall
  2. upsidedownviking

    Sold/Expired Titanium E-series bodies for 18350, 18500, and 18650. Also Ti bezels and rings.

    Paypal incoming for "18500 size in style 44 for $270" Thanks!
  3. upsidedownviking

    Sold/Expired WTB: AW 3 level Incan Driver Switch for SF tail cap

    Hi All, WTB an AW 3 level Incan Driver Switch for SF tail caps, preferably the Z41 version, name your price! originally sold here: http://www.candlepowerforums.com/vb/showthread.php?213751-Softstart-3-level-Incan-Driver-Switch-For-SF-P-C-M-series-Tail-Cap Sorry if this is the wrong spot to...
  4. upsidedownviking

    Component specifications, replacement parts & repair guides

    Coldshot, the reflector on my sst50 was thermal epoxied to the top of the pill flat pill to flat bottom of reflector, I used a razor blade on seam and tapped it in to split the whole top of the xml pill is recessed to allow for the xml star, the reflector has two feet that extend down and are...
  5. upsidedownviking

    Component specifications, replacement parts & repair guides

    Lots of good info :) anyone know about the reflectors in the sst50 and xml edc's? know they are different, the SST50 sits flush and the xml has two posts that sit on the LED board, looks like it was customized some part names or or where to buy would be great! Thanks
  6. upsidedownviking

    V10R Ti+ LED swap, now DD with fully charged cells?

    Hi all, Been searching around and saw some similar issues but no solutions. Sunwayman V10R Ti+ swapped U2 for T6 XML, now the light functions with a SF primary but not with recently charged IMR or black AW's. It goes into a single direct drive mode, and either the dial is working and you...
  7. upsidedownviking

    Lens Light mini mod, XM-L2 w KD 2.2 amp 3 level driver

    To remove the LED plug I used a 1/8" flat screwdriver and tapped it into the groove around the top of can working my way around prying lightly, I though it was press fit in but it is only pressure from the Neg wire and the epoxy holding it in.
  8. upsidedownviking

    Lens Light mini mod, XM-L2 w KD 2.2 amp 3 level driver

    Really long narrow needle nose pliers, up though the battery bay, there's two holes in the bottom of the can, it's threaded into the body standard so you twist the pliers clockwise to unscrew it. don't have to remove the twisting focus part of the body just the lens.
  9. upsidedownviking

    Lens Light mini mod, XM-L2 w KD 2.2 amp 3 level driver

    The focus part is pretty cool, and with the amount of room inside of the can it's pretty easy to mod, they're well built, I really want to try to bore one to 18mm but I would want some better parts for my lathe before trying to bore Ti, a 6 jaw chuck and serious boring bar, would cheat on...
  10. upsidedownviking

    Lens Light mini mod, XM-L2 w KD 2.2 amp 3 level driver

    Really like the focus feature of my LL TAD Ti Mini but it just wasn't bright enough on my last work trip. Had some parts laying around and decided to tear into it. The LED is mounted to a plug that sits in the top of the can, the can is mostly filled with epoxy and the driver board itself is...
  11. upsidedownviking

    GDuP progress thread.

    With the custom levels, are only the outputs adjustable or can the order and number of the levels be changed? i.e. could one be programed for hi-med-low or super low-hi-med? Thanks!
  12. upsidedownviking

    Sold/Expired Lime Green Mac Tri EDC (price lowered)

    Re: Titanium Ra, Mirage Man, Mac Tri, etc. I'll take the Lime Tri-edc off your hands, PM incoming, Thanks!
  13. upsidedownviking

    Sold/Expired FS: Ti Flood Mako from recent run SOLD & Shipped Thanks!

    Re: FS: Ti Flood Mako from recent run Awesome! Glad it made it safe, thanks and Enjoy!
  14. upsidedownviking

    Quick XML-EDC Question(s)

    Thanks Mac!! :thumbsup:
  15. upsidedownviking

    Quick XML-EDC Question(s)

    Hi Mac, and anyone in the know... Are the outputs listed under the XML-EDC on Mac's site for the "Cool" or "Neutral" XML? and are they for the latest driver? and while I'm asking what XML (T6,T5 etc.) are being used in them? Thanks! :wave: I did poke around looking for the answer(s) but...
Top