Knives vs Flashlights
- Thread starter Random Dan
- Start date
Help Support Candle Power Flashlight Forum
Knives and lights, what a subject.
I was held back by strict parents and don't think I was allowed to carry (and play with) my OWN knife before I was 5, circa 1956. Parents did not seem to concerned with flashlights. So carried.
But since 1956 (when security allows) there has usually been a knife in my pocket, if not also on my hip.
I've been carrying a Victorinox Cybertool M for about 20 years, except when it was misplaced. In 2003 I bought an S for a backup. But that was a poor choice and 2 years ago I bought another M, for a failsafe backup.
From 1975 to 2011 I was basically in Field Support for the US Army mapping community. This required almost daily use of knives for cutting everything except flatulation. For the last 20 years of that technology came in and having a selection of bits, especially a Torx and a Phillips saved a LOT OF TIME and money. So I went through a Leatherman/Gerber period until my WONDERFUL wife bought me a Victorinox Cybertool M at the factory.
Flashlights are another matter,
Like I wrote I've had them since youth but I don't worry if I can't find one by slapping my pockets.
I currently try to keep a DeWalt 20v Max (I've got most of them) in every often used room plus probably about 30 or so Harbor Freight "freebies" floating around.
I was held back by strict parents and don't think I was allowed to carry (and play with) my OWN knife before I was 5, circa 1956. Parents did not seem to concerned with flashlights. So carried.
But since 1956 (when security allows) there has usually been a knife in my pocket, if not also on my hip.
I've been carrying a Victorinox Cybertool M for about 20 years, except when it was misplaced. In 2003 I bought an S for a backup. But that was a poor choice and 2 years ago I bought another M, for a failsafe backup.
From 1975 to 2011 I was basically in Field Support for the US Army mapping community. This required almost daily use of knives for cutting everything except flatulation. For the last 20 years of that technology came in and having a selection of bits, especially a Torx and a Phillips saved a LOT OF TIME and money. So I went through a Leatherman/Gerber period until my WONDERFUL wife bought me a Victorinox Cybertool M at the factory.
Flashlights are another matter,
Like I wrote I've had them since youth but I don't worry if I can't find one by slapping my pockets.
I currently try to keep a DeWalt 20v Max (I've got most of them) in every often used room plus probably about 30 or so Harbor Freight "freebies" floating around.
I have to disagree on the advancing technology assertion with knives. Blade steels, locking mechanisms and handle materials have come MILES in the past 30 years and do not cease, not to mention the search for the ultimate knife 😉
Someone who knows how to sharpen & strop their blade will get as much use out of 440C or old carbon steel then a S110V (perhaps more because these super steels can be a pain on the a** to sharpen). A good old fixed blade, back lock or slip joint is as valid a tool now as it was when it was made. Its like with vintage guns; well taken care of , with modern ammo they shoot as well (or better) as any.
Actually in my experience, even the super steels are easy to sharpen. You just need the right tools. Silicon carbide stones can cut through the vanadium carbides. As can diamond. And use a coarse enough stone. I find I can sharpen anything with a Norton crystolon stone. Or a dmt diamond hone. Or even some sic paper on a flat board
I've encountered individuals who claim they've resharpened their Super exotic steel blades numerous times. A bit of probing has found that what they're actually doing is maintaining the edge on their blades. Weekend camping trip or something similar. Come home, maintain the edge. They call it sharpening.
Can't argue with that! I'm a fan of not letting my knives get dull enough to need a full resharpening… but I'm OCD like that. I've shied away from the super hard steels (s90v and zdp-189) for the fact that they tend to be far more brittle and do not tolerate chopping/hacking or twisting and have a tendency to chip and crack if exposed to that treatment. For me the sweet spot has been M390 although Elmax is pretty nice (but harder to sharpen). I don't let my M390 knives get dull but I only have to touch them up a couple times a year with regular use. Granted, I use them as cutting tools, not axes.
fuyume
Enlightened
- Joined
- Jun 25, 2021
- Messages
- 275
I can take a 200 year old carbon steel knife, and it will perform more than adequately. Try that with a 200 year old flashlight! 😂
Okay....
*Time travels back to 1822. Buys a candle. Returns to 2022. Lights candle with a match.*
There you go. (First flashlight was invented in 1899.) 😎
But what about lens wick lights?))
As they say, there are copies of the 13th century
Oh I found police lights
Last edited:
That's an interesting video.
MTHall
Newly Enlightened
- Joined
- Apr 16, 2020
- Messages
- 78
I've loved knives 60 years, fountain pens since 1977, and lights for.a.few years. To me lights are a tool though.
Why is there a Love of Fountain Pens?
kerneldrop
Flashlight Enthusiast
Distinct look, can get 100s of colors of ink.
Used to all the nibs were flexible and you could really add some cool characteristics to your writing.
The downside to them is you really need quality paper to bring out the best of the characteristics.
Unfortunately most modern flex nibs are garbage, unlike the vintage ones. Nowadays, you need a stub nib to put any real flourish into your writing. But some of those are awful too. I find the stub nib from TWSBI to be one of the best inexpensive stubs out there.
I tried fountain pens for awhile but even aside from my bad hand writing Ive not found them to be convenient. Turned out I just dont use these pens enough to keep them from drying out. Also the risk of ruing my shirts with ink stains. Ive had vintage Montblancs & a few Lamys. Still own a stainless Lamy 2000 in board. Ive switched to roller balls since. Or a typewriter.
When I was in school we were still taught (more like forced) to write script with a fountain pen. Anything that wasn't written in script with ink wasn't even graded. So I guess I dont quite have the romantic feelings towards these pens that others (especially in the US) seem to have. Later on I used a typewriter for school work whenever I could. A Olympia report deluxe from 74. Still works.
When I was in school we were still taught (more like forced) to write script with a fountain pen. Anything that wasn't written in script with ink wasn't even graded. So I guess I dont quite have the romantic feelings towards these pens that others (especially in the US) seem to have. Later on I used a typewriter for school work whenever I could. A Olympia report deluxe from 74. Still works.
Last edited:
