Search results for query: *

  1. Effulgence

    Lumens Factory & Battery Junction

    Just get the Wolf-Eyes brand cells. They make good contact, don't require magnets, and are worth it in quality. I have those tenergy cells... bad purchase. AW cells are nice, but some of my cells make poor contact.
  2. Effulgence

    MiniMag w/ Auroralite Kit

    That's an interesting comparision with the L1D CE... Better host, better quality, less heat, and cheaper - but less output. The throw will probably go to the MiniMag Auroralite TL-3. Looking at flashlightreviews.com shows bigger numbers. AW 14500 and WE LRB-AAs around about the same price...
  3. Effulgence

    2x 18650 and D26 lamp light

    mdocod, does that Leef 2x18650 tube fit the threads of the M90 or any other Wolf-Eyes configurations?
  4. Effulgence

    MiniMag w/ Auroralite Kit

    RCNUK, I think you may be refering to the NiteItz IQ switch.
  5. Effulgence

    Rattlesnake M90 questions

    Excellent choice, the EO-13 is the way to go! Now all you have to do is keep using WE cells for all your lights! I think they have only 14500 (LRB-AA), 18650, and 18500 (as far as I know). These are great quality cells. (I think instead of the D36 Cree lamp assembly, they should have a Cree...
  6. Effulgence

    MiniMag w/ Auroralite Kit

    Thermal paste sounds like a good idea. I think Sandwiche Shoppe sells them, but I'm not sure. The question is, how could you apply it without making a mess and will it hold up to the heat of the TL-3 bulb without dripping onto the batteries? I bent the pins on the TL-3 bulb outward, seems to...
  7. Effulgence

    MiniMag w/ Auroralite Kit

    I've got Minimags with the Auroralite kit using AW 14500s and the TL-3 lamp. I like the setup and the power from a MiniMag is fun to show off, but I have some problems: The ceramic bi-pin piece is really annoying since it doesn't stay put, I was wondering if anyone has a solution to keeping it...
  8. Effulgence

    Wolf-Eyes D2AX

    How is the switch different? They're both tailcap clicky with momentary function just like the M90 right? Perhaps it is different dimension tailcap or different threads? Thanks guys, from reading this I just found out now that PTS does sell the bezel individually for the 6A and the M90, but...
  9. Effulgence

    Wolf-Eyes D2AX

    If this is the same as the 6AX Sniper, can either run with a single 18650? It's listed as 2x CR123A but I'm thinking about the D2AX (or the 6AX) running a single 18650 and the new WE CREE lamp assembly. Preferably the 1000mA D26 version that's slated to come out pretty soon.
  10. Effulgence

    Rattlesnake M90 questions

    I don't pocket carry it either, but I like the shorter design. Since it is a tailcap clicky, and I don't mount it to a weapon, it's just clumsy to have it that long. If it had a clicky in a spot similar to a C/D-cell Mags, then I could care less about how long it was (to a certain extent). The...
  11. Effulgence

    Rattlesnake M90 questions

    Pardon me, but the complete package does not include another lamp assembly because this is the new stock lamp assembly (you don't get the bulb that was meant for the 4 123s). (I got the M90 first, then a conversion kit - hence I got 2 lamp assemblies.) Here is the 150A complete package. Here...
  12. Effulgence

    Rattlesnake M90 questions

    After putting so much money into these WE legos, I think that you would do fine with either the 150A or 168A batteries. I recommend that you just get the package deal plus the LF EO-13 700lm lamp assembly from PTS and save the hassle. Paul and many others have stated that the WE stock 168A...
  13. Effulgence

    What metal reflectors fit in a MINI Maglite? How about ceramic bipin slugs?

    Oh, I was hoping this thread had answers. Unfortunately not... I have been searching for this elusive kit for a long while.
  14. Effulgence

    new to mag 85

    So basically if using Li-Ion C's, then use a 3D Mag w/ WA1185 and 3 AW C Li-Ions?
  15. Effulgence

    new to mag 85

    I'm new to the Mag85 as well. I have in mind all the necessary components but am conflicted with the battery components. Can anyone suggest what setup would run best with AW C Li-Ion or 18650s? I'm currently planning on using: 3D MagLite from Lowe's KIU Hi-Temp Socket & Mag Switch Resistant...
  16. Effulgence

    M90 Rattlesnake EO-13 Doesn't Fire Up

    True, it's an inch or 2 shy of being a 3D Mag. But I don't really care for run time. This isn't meant to be a long lasting light anyways. I just need it for intermittant bursts not more than 5 minutes at a time with ease of one hand operation in a single click. It's not a secondary defensive...
  17. Effulgence

    M90 Rattlesnake EO-13 Doesn't Fire Up

    Oh, right - does the LRB-150A's have the button on the + end? Or would I still need magnets to make contact? And it does fire up the EO-13 with one click right?
  18. Effulgence

    M90 Rattlesnake EO-13 Doesn't Fire Up

    I like the idea of using only the 1/2 CR123A extender for 3x WE LRB-150A. Too bad I didn't research more before I bought all of my stuff... CR123As are tiny, so that extender shouldn't have much of a difference. Now what to do with my spare extender? Maybe the D26 model lights can use this...
  19. Effulgence

    M90 Rattlesnake EO-13 Doesn't Fire Up

    I'm only running the M90 with 18650 extender with the stock lamp that came with the conversion kit. Even though it takes two clicks, I believe it only outputs 300 bulb lumens. I still love the power. The 18650 extender makes the light rather long and clunky. The rear clicky tailcap on the...
  20. Effulgence

    M90 Rattlesnake EO-13 Doesn't Fire Up

    Tenergy 18650's... never again. I got the magnets at Radio Shack. Took 2 clicks to fire up, but at least I have a working light now. Thanks Paul5M. Also, do I need the magnets if I buy the AW 18650's from Lighthound? Or should I just bite the bullet and get the WE LRB-168A 2200mAh's? Would the...

Latest posts

Back
Top