Search results for query: *

  1. M

    Sun ray xml-t6 not very impressive

    I wander if I can put a new driver in the drop in
  2. M

    Sun ray xml-t6 not very impressive

    I just checked the current to the led, and its only 1A. I sent a message to the seller, but dont expect it to go very far. I knew it wasnt bright enough to be 1000 lumens, oh well it was only 23 usd.lol
  3. M

    Sun ray xml-t6 not very impressive

    Checkinf the current at the tailcap would be different than checking it between the driver and led module. The drop in module is pulling 650mA with a 6V supply, and 1000mA with a 3.8V supply. This means the drop in is only pulling 3.8watts. But the foward voltage is 3.35V right on the money for...
  4. M

    Sun ray xml-t6 not very impressive

    The drop in actually does have good contact with the wall. I havnt checked the current because my soldering iron broke, i do have to unhook the wire to check right?
  5. M

    Sun ray xml-t6 not very impressive

    Yea, i figured a thousand lumens would be brighter than my 200 lumen SL even if it wasnt focused as well, but i was wrong, maybe the driver isnt pushing 3A, idk, all i do no is its a p60 drop in.
  6. M

    Sun ray xml-t6 not very impressive

    I bought it off ebay, supposed to be 1000 lumens, but i dont think its even close. It has a p60 drop in with a xml emitter, but its barely brighter than my streamlight with a xre emitter at ten feet, and it has no throw. It throws about 100 yards tops with no real beam just flood. The SL blows...
  7. M

    Simple question, did seach, couldnt find answer.

    But how many amps would a pair of AA's put out if hooked directly to the led
  8. M

    Power supply options?

    GOT YA, Thanks again
  9. M

    Power supply options?

    wquiles, I have one more question, If I use the H6CC driver and tell him to set it to 3Amps, Will all 3 leds get 3 Amps, Or 1 Amp per Led? That part is confusing.
  10. M

    Power supply options?

    wquiles, Thanks, you explained that so even a noob like me could understand. I know that took a little time, Thank you!
  11. M

    Power supply options?

    "Codiak" I was thinking of that too, but like I said, Im new to this and didnt want to sound dumb. But, again, I cant seem to find a driver for these specs either. 12v input, 10v 8A output. Is there someone on CPF that could make this for me?
  12. M

    Simple question, did seach, couldnt find answer.

    I have a x-ml t6, Can it be direct driven with no driver off 2 AA batteries?
  13. M

    Power supply options?

    Thanks for the input guys. Im still in the learning process. I am wanting to build an off road light for my truck, ten x-ml's running at 2.8-3 amps each. I'm thinking about what BLASTERMAN said about running ten buck drivers, but I cant seem to find any that fit my specs. 12v input, 3.3v 2.8A...
  14. M

    Power supply options?

    Ok, i am wanting to power ten x-ml's in series. Can you help me choose a power supply? It needs a 12v input, and 28-30 amp output. What would the output voltage need to be? :)Thanks
  15. M

    Question about heat sink for 2d mag mod

    I dont have the equipment to machine aluminum. I was wandering if any body has used lead to make a heat sink. Its readily availabe and can easily be machined with a dremel tool.
  16. M

    XM-L driver question

    I did a search and could not find the exact answer IM lookin for. I am looking for a driver for my XM-L 6V battery project. I stumbled across a driver that had an output of 2800ma and an output voltage of 16-18 volts. It said its for an XML. wouldnt a 16v output voltage burn up an XML, and what...
  17. M

    Modded streamlight's "c4" led

    We all know that there is nothing special about SL's "c4" leds. I started with a SL stinger led hp. Its a nice light with good throw. Thats what I like, its all about distance to me. My light came with a Cree XR-E emitter, unown bin. Its ran at about 700ma and puts out 200 lumens. I coud easily...
  18. M

    Streamlight stinger hp led

    Because of the magnified reflector, this light has alot of throw. It has usable light out around 400 yards ( or 1200 feet). ive read that the xm-l has more of a floody beam than the xr-e. Something like 125 degree vs xre having like 90 degree. How much throw might I loose?
  19. M

    Streamlight stinger hp led

    It a 20mm circle.
  20. M

    Streamlight stinger hp led

    I found the emittter im goin to buy. It is the xml-u2-1c, but I cant decide to get it on a 16mm round board or 20mm star board.

Latest posts

Back
Top