Search results for query: *

  1. TakeTheActive

    Maha MH-C9000 SUPPORT / FAQ - continuation

    Charging At Below 0.5C... Thanks! :wave: As I probably said here (DEFINITELY said on other forums where I've created lengthy FAQs), I usually immerse myself in a topic for several months at a time. Then, when I feel that I've learned, and shared, as much as I can, I move onto my next topic of...
  2. TakeTheActive

    Maha MH-C9000 SUPPORT / FAQ - continuation

    ...adapters I have. I needed to use a tiny screwdriver to slightly bow the contacts away from the plastic so that they would reach the contacts on my chargers *BEFORE* the plastic shoulders surrounding them contacted the plastic shoulders on the chargers. Just a thought. :thinking: Thanks! :)
  3. TakeTheActive

    4x AA NiMH in series discharge @ different rates. Why?

    ...your logic completely. In a series circuit, each NiMH cell is at its individual voltage (~1.2VDC -> ~0.9VDC), while the current through each is *EXACTLY* the same, until it poops out. Then the current being FORCED through it by the remaining cells will eventually 'Reverse Charge' it and...
  4. TakeTheActive

    4x AA NiMH in series discharge @ different rates. Why?

    ...on the GREEN LINK in my Sig Line. I agree with Mr Happy and, IIRC, the majority of the AA/AAA NiMH users here. Start out with the C9000 - it's a *MUCH* better product. To charge 4 2000mAh AAs @ 1000mA (0.5C), you just insert the cells and press ENTER 8 times. And the 'Break-In' function is...
  5. TakeTheActive

    Maha MH-C9000, the Wizard One Charger (Part 2)

    What's the FIRST voltage reading after you insert this AAA?
  6. TakeTheActive

    Maha MH-C9000 SUPPORT / FAQ - continuation

    SOMETHING COMPLETELY NEW For the Maha MH-C9000: Custom C/D Adapters! . . . Wow Russel!!! I always thought that YOUR setup: Re: Testing C/D cells in Maha C9000 . . was the "Cats Meow" for C / D cells. Unable to duplicate it, I bought 16 magnets from the web site you recommended (sorry...
  7. TakeTheActive

    Ni-MH LSD usage advice

    Thanks for the update! :)
  8. TakeTheActive

    MH-C9000 and Eneloops charge rate

    Read the FAQs, Mam... Just the FAQs :D | New Forum Software *BROKEN*! TESTING: (using forum icons vs manually entering the *EXACT SAME* information) asdf qwer zxcv __________________________________________________ . . . (Hopefully ;) ) *EVERYTHING* a Newbie needs to know...
  9. TakeTheActive

    "HIGH" cells with C9000

    Although You Posted on Aug 26th, and Not Apr 1st, This *STILL* Sounds Interesting... Although this was posted on August 26th, and not April 1st, it *STILL* sounds like an interesting / feasible 'Experiment' to add to my 'Round Tuit' List. :thinking: Anyone who remembers me from my FLURRY of...
  10. TakeTheActive

    looking for an in-car ni-mh charger circuit

    TTA's NiMH/NiCD Battery Charger Specifications Thread: Duracell CEF23 Mobile Charger Harder and harder to find (since Duracell stopped making them :shakehead ), but would suit your needs perfectly (assuming the 3 NiMH cells are AA or AAA ;) ). They do appear every now-and-then. Be sure to get...
  11. TakeTheActive

    Maha MH-C9000 SUPPORT / FAQ - continuation

    Actually:-DeltaV Max Voltage Max Temp Max TimeBut the C9000 is so gentle, with its Max Voltage set @ 1.47VDC, I believe that is the most used. AFAICT, I've never seen my C9000 terminate on Max Temp. TTA's NiMH/NiCD Battery Charger Specifications Thread: Maha MH-C9000
  12. TakeTheActive

    Maha MH-C9000 SUPPORT / FAQ - continuation

    Please run a 'Refresh/Analyze' @ 400/200 and post the results.
  13. TakeTheActive

    can i solder wires to magnets and attach magnets to battery for charging?

    Better to Use Terminals... A washer is so 'crude'. :eek: I use: AMP Ring Terminals Size 22-16 (except the box of 1250 that I bought at a Computer Fair a couple of decades ago are insulated and non-insulated was the first GOOGLE LINK which included a picture ;) ).
  14. TakeTheActive

    Best way to maintenence Eneloops?

    Make Candlepower Forums a Contact... Try adding the Candlepower 'Sender' address to your Contacts List / Address Book and see what happens.
  15. TakeTheActive

    Pulse Charging NiMh Batteries?

    Before you get too excited, if you own a voltmeter, take a voltage reading of the cells INSIDE the 401fs right when the charger signals 'Done'. Then, remove the cells and let them 'rest' for 2 hours. THEN, discharge them in the C9000. You might be seeing 'Surface Charge'. The C9000 is a very...
  16. TakeTheActive

    Enloops in Sanyo charger?

    ...remaining will be OVERCHARGED until the one with less charge remaining is fully charged. There's a LOT of good Newbie information in that post - if you read *EVERY* LINK, you'll certainly be in a much better position, knowledge-wise, than you are now. Grab your favorite beverage and dive in! :)
  17. TakeTheActive

    MH-C9000 and Eneloops charge rate

    ...One STICKY Only, Please... From its creation on 12/31/2008 until 02/05/2009, it was just in my Sig Line. On 02/06/2009, it was added to the "Threads of Interest" STICKY. The policy on THIS forum is *ONE* STICKY, containing the LINKs to what on other forums would have been a PAGEFUL of...
  18. TakeTheActive

    Charger sticky

    "Threads of Interest"... Did you look inside the STICKY at the top of this forum? :o :sssh:
  19. TakeTheActive

    MH-C9000 and Eneloops charge rate

    If you want consistency, you'll use 0.2C for Discharge - the same rate as BREAK-IN. That way *ALL* of your Discharge Capacities are 'comparable' to one another. If BREAK-IN uses 0.2C (400mA for a 2000mAh AA) and you use 0.4C (800mA for a 2000mAh AA), you can't compare the Capacities - 0.4C will...
Back
Top