Search results for query: *

  • Users: 1-3-2-4
  • Content: Threads
  • Order by date
  1. 1

    Retrofitting a Flood light

    I kinda already ordered the parts minus the heatsink because I wanted some other views on this.. I don't have info on the fixture I just know it used hard to find PL-C 20W CFL bulbs so I figured it would be a good time to try and retrofit. Anyways I will be using a Bridgelux Vero 18 in both...
  2. 1

    Reflector for bridgelux LED?

    I have the Bridgelux BXRA-50C2600-B-00 I was wondering if they made 32 mm reflectors for this? http://www.digikey.com/product-search/en?WT.z_header=search_go&lang=en&site=us&keywords=976-1085-ND&x=13&y=13&formaction=on
  3. 1

    Heatsink 6 LED's at 350mA

    I have been wondering maybe someone can help me out.. I how can you cool 6 LED's but getting the heat away from the LED's in a enclosed fixture that's mounted on a wall outdoors? I would assume it needs to be passive cooled?
  4. 1

    Security wall lighting fixture

    So right now I have a 70W HPS fixture up now I assume when the bulb is new it's around 6800 lm? So I have this vr2 lithonia fixture that I got free and in stock form it comes only with a 7W CFL with the ballast.. What I was proposing to do was to take that out and put LED's on a metal plate...
  5. 1

    Cree Star and problem

    not sure what's up.. I just mounted two royal blue Cree XR-E's on a alimum bar with mounting screws.. So I wried in series and the LED's wont come on at all I'm using a buckpuck to drive them at 700mA
  6. 1

    Question on a 132 lm Amber LED

    I have a Cree P4 LED and I think it's rated at like 124 lm? Anyways long story short Could 132 lm be seem outside on a sunny day in a reflective housing?
  7. 1

    1157 LED

    I'm stumped and maybe someone here can help.. long story short I was going to buy a 3 LED star in a amber color and run it with say like a 700mA driver.. well I thought about that but what I don't understand is how I will get the dual brightness from the LED?
  8. 1

    How bright?

    If you have one LED that's 939 lm at 1A how bright would it be total with 3 other LED's also at 939 lm?
  9. 1

    Side emitting luxeons pictures?

    the side emitting versions do they still emit some type of light at the tip?
  10. 1

    What happened to my P7?

    I had it connected in series to a 1a power puck for testing.. so when mounting to the heatsink I decided to remove the wires from the 2nd LED went to hook up everything again and now it wont light up but the first LED does while the 2nd LED is connected. now the thing that puzzles me is while...
  11. 1

    42lm for a turn signal housing?

    is 42lm bright enough to still be seen during daylight hours? I have a 60 LED SMT bulb im not too pleased with and was curious.
  12. 1

    Red-orange vs Amber Luxeon LED's

    I'm looking for something for a turn signal housing but to the eye which color is more amber?
  13. 1

    Dash fade in

    What would be required to have dash lights fade in when you turn on your headlights and to also fade out when you turn the lights off?
  14. 1

    Mag lite 3AA LED?

    I had a 3 AA maglite that was the LED version however one day the batteries just blew up so I took off the LED, anyone know who makes it and what are the ratings for it?
  15. 1

    flashlight/nightlight combo

    I have one of these lights that runs off 4 1.2V Nicad cells the LED for the flashlight works but I wonder if I can make it a little brighter? also the LED for the nightlight just one day just went :poof: and stopped working.. it's a cheap light but I was wondering about it.
  16. 1

    SSC P7 and driver question

    Hi I'm new here and I ordered a few things for a project I want to make which is very bright reverse lights for a car. This is a break down of what I ordered... 2 SSC P7's 2 40x40x18mm heatsink with adhesive tape 1 power Puck (1000mA version) 1 40x18mm 14,000 RPM fan to have on hand for...

Latest posts

Back
Top