Search results for query: *

  1. C

    Titanium Peaks & Plateaus -- custom build final pics

    Re: Titanium Peaks & Plateaus -- custom build final pics Good to hear. He makes some of the best looking flashlights.
  2. C

    Titanium Peaks & Plateaus -- custom build final pics

    Looks great. Must be a lot of work keeping track of where you are on the milling
  3. C

    Eveready Lithium

    Purina ?!? They should call them "flashlight chow".
  4. C

    My New Lathe

    Try warming up the spindle bearings, then remeasure. Should get better. Start at 250 RPM for 20min, then go up to 500 RPM for 20min, and them 1000 RPM for another 20min. Check for overheating before increasing speed. Oh, and make sure the bearings have the proper oil if they arn't sealed...
  5. C

    NiCd still used in cordless drills Batterys

    I have had two 12v DeWalt re-celled at primecell.com with good results. I also use a 14v pack with my 12v drill. I had to modify the drill to take the slightly diferent shape of the 14v pack.
  6. C

    Machining plastics

    Chips not breaking is a big problem with plastics. If you can interupt the cut to make smaller strings that can help. Also clean away the chips often to prevent build up. If you have the room, you can also try a shop vac to pull away the string as it forms.
  7. C

    Need advice on a "SILENT" garage door opener

    If you can get some rubber washers between the bolt heads and the metal straps that hold the motor unit to the ceiliing. Also you will need to add rubber washers between the metal strap and the ceilinig. That should hepl a lot. Oh, and do the same with the bolts that hold the end of the track...
  8. C

    Build your own CD battery tab welder for $100

    Also look for low inductance caps. Those are mostly used for photoflash apps. If you can't get low inductance, you can use a bunch of smaller caps. and wire them up in paralell. But you need to have all of the wires from each side of the caps. go to one common point. (one for pos. and one for...
  9. C

    Switches

    That kind of switch is called an "alternate action" switch. Dan
  10. C

    Looking for Ideas on Plastic Canoe Re-Enforcement & Repair.

    you need to learn how to weld plastic. Get a container of simmilar plastic to practice on. You will need a sliver or rod of filler plastic. Use a big soldering gun as your heat source. You will need to heat the area you want to build up, as well as the filler rod. You will need to push the...
  11. C

    I just bought a battery pack welder

    You would need to use low inductance caps. for that use. Normal caps. won't be able to dump all their power quickly enough for welding. Search the surplus market for "photo flash" caps.
  12. C

    POWER: (batts, cables, inverters, chargers) Show your Setup.

    I see them online at :http://www.powerwerx.com/ For heavy connections, I like the SB series conectors. Dan
  13. C

    Two types of brake cleaners: which is better?

    I make my own: 1 part acetone 1 part xylene Works great. Keep off paint and plastics. Use good ventalation. Dan
  14. C

    24 volt bulb for a Bulldozer light!

    Look for forklift parts. They have lights in 12v, 24v, 36v, and 48v. Usualy good for high vibration apps.
  15. C

    Digital Calipers & Pitch Guages

    No, not more accurate, but more usefull. You can set the origin (0.000) at any point, and then measure diferances. Like if you wanted to make several parts all the same size. You would make one part to the required length, and set the calipers to zero on that part, then measure other...
  16. C

    AA/AAA charger recommendation for car installation

    I just got the duracell 15 minute cahrger at Costco for about $32.00. Comes with a lighter plug, and is a four chanel charger. The only thing I don't like about it is that it has only one LED to show when it is done.
  17. C

    portable drill battery rebuild

    http://primecell.com/index.html
  18. C

    Resistor material - flat plate

    I once had a pint of graphite power, but I lost it or through it out. I got it at a marine supply store (west marine). It is used as an epoxy filler. You might also try the graphite used to lube locks. (locksmith shop) Dan
  19. C

    Machining Titanium vs Stainless Steel

    Everything you have said is true. The greatest factor is time. Ti has to be cut at much lower speeds, and as you may have heard, time is money.
  20. C

    D-Mag o-sink information

    So what you are saying is that copper is too good at conducting heat, and the mag body can't get rid of it fast enough? But aluminium is better because it coducts heat less, so that the mag body isn't overwhelmed? I think a little knowledge is a dangerous thing.

Latest posts

Back
Top