Search results for query: *

  1. Tohuwabohu

    JetBeam RRT-2 Raptor (R2) Review: RUNTIMES, BEAMSHOTS, and more!

    Strobe is a bit slower on my RRT-2: 18.7Hz, 13.2Hz, 5.7Hz and 4.8Hz, complete cycle 2.4s. Same frequency with 2xRCR123 and 1x18650. There are some scope graphs (all levels with 1x18650 and 2xRCR123) in my RRT-2 photo album in the Messerforum.net. I took these graphs with fully charged...
  2. Tohuwabohu

    EagleTac M2XC4 Review: RUNTIMES, PHOTOS, BEAMSHOTS and more!

    Here is a link to the post with the disassembled head: http://www.candlepowerforums.com/vb/showpost.php?p=2956552&postcount=19.
  3. Tohuwabohu

    EagleTac T100C2 Review - A Layman's Perspective

    I don't have any beamshots but I did some runtime tests with "true" 2400Ah Trustfire 18650s. Runtime with these 18650s is better than that of my P100C2 with 2 Surefire CR123As. The light output in both modes is slightly lower than that of my P100C2 but the T100C2 has far more throw. In turbo...
  4. Tohuwabohu

    OLight M20 Warrior (Premium R2) Review

    I can't do it. I can't stay at home for such a long time and I don't like to leave a flashlight and my computer turned on when I go to work. I added a graph for high mode with Surefire CR123A batteries in post #40.
  5. Tohuwabohu

    OLight M20 Warrior (Premium R2) Review

    Thanks for the review. I'd like to add some runtime graphs High mode The spikes at the right end of some graphs are caused by the low battery warning. The values in brackets are the total light output with one set of batteries. With the two protected AW 16340 I get (143) which is...
  6. Tohuwabohu

    JetBeam Jet-II & *Jet-III PRO* IBS Review - RUNTIMES, COMPARISONS + FOCUS SHOTS!

    Re: JetBeam Jet-II & *Jet-III PRO* IBS Review - RUNTIMES, COMPARISONS + FOCUS SHOTS! I got my JET-II PRO IBS a few days ago. It looks like JetBeam did update the driver board. The positive contact is a solid metal disc. My JET-II PRO IBS that I got in the same package has a driver with a spring...
  7. Tohuwabohu

    NiteCore D10 & EX10 Reviews: RUNTIMES, BEAMSHOTS, COMPARISONS & more!

    Here are some results of my EX10 on lowest setting: V mA 0.8 48 1.2 30 1.5 22 1.8 18 3.0 10.5 3.7 8.5 3.9 7 4.2 9
  8. Tohuwabohu

    NiteCore D10 & EX10 Reviews: RUNTIMES, BEAMSHOTS, COMPARISONS & more!

    According to my measurements on max. brightness with my bench power supply the current draw at 3.8V is 0.55A. It increases with increasing or decreasing voltage from this point. This could be the bend in your runtime graphs. Maximum current draw is approximately 2A at 1.1V. Voltage can be...
  9. Tohuwabohu

    NiteCore Extreme Review - RUNTIMES, BEAMSHOTS, COMPARISONS, etc.

    I got my NiteCore Extreme today. There is just one tiny detail I can add to the excellent review: the PWM frequency is 38kHz. I can't think of any circumstance where it could be visible.
  10. Tohuwabohu

    Zebralight H30-Q5 Review (Picture Heavy)

    Hello Jeff, thanks for the welcome. I have been reading here for some time now but only registered a few days ago because writing in english is hard work for me. I am just now doing some measurements with an USB-Scope because I want to know why I see the flickering in high mode. I have the...
  11. Tohuwabohu

    Zebralight H30-Q5 Review (Picture Heavy)

    I connected the light to my bench power supply an measured the current draw in the voltage region form 2.4V to 4.2V in all three modes and then calculated the power drain. U/V Ilow/mA Imed/mA I high/mA Plow/mW Pmed/mW Phigh/W 2.4 19 85 700 46 204...

Latest posts

Back
Top