Search results for query: *

  1. petrev

    PWM Regulator for Mag C body, JM-PhD-C1

    Hi Jimmy Need one now (or two) :) My AW C Softstarter has gone "Always ON" !!! Probably fried the FET but it is a sealed up, potted, thing so can't get in to replace it :( Soon as you can :thumbsup: Cheers Pete
  2. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    :thumbsup: Totally :cool: Put me on the list for 1 right now Pete
  3. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    :thumbsup:
  4. petrev

    D.I.Y -- Simple FET Switch KIU-D Mod -- How To Guide . PIC Heavy

    Hi Best to PM JimmyM as I am not technically qualified ! Cheers Pete
  5. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Sounds good - From my point of view (400W-1100W) Not sure how slimmed down you are going ? I like the idea of "in the field" swaps of bulb so need to be able to change max power setting without re-prog (Change profile ?! or some such) I also would like to be able to add the driver...
  6. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy That is a lovely looking board you got there - Super Nice. I will have 1 for definite - people this side of the pond don't seem to want to spend any money on my big lights - so I will just make a super 1000W light for me and see if there is any respose when it's done . . . You...
  7. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Sounds a good way to go. Nice idea and I guess you could parallel 2 units to drive both 12V and 5V (for a fan and a small volt meter display say ?) Nice find. Cheers Pete
  8. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Not essential ! Could be a nice option for people who want to monitor batteries or lamp housing ? Or some such Low extra cost might consider it ! ? ? Keep up the great work Cheers Pete
  9. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Looks Lovely SE Regional Get-together IV - Cloudland Canyon - Tenn Georgia Ala - May 15 Tentative :cool: Shame it's not in my neck of the woods ! Pete
  10. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Sounds Great As long as the pads are there for all the extras you can think of - and you write the masses of code needed - I think everyone will be happy. Cheers Pete
  11. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Seems the 328P is about $6 for 1 unit so I would wear the extra for my single unit to get the option of an attached display that could move to another if desired and act as a programmer. If this is anything like what you have been talking about ? ? ? Not sure what the cost frames...
  12. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    OK ! Lost me there . . .so I will just trust you and leave it up to the expert . . . Always best really :candle: Cheers Pete
  13. petrev

    PWM Regulator for Lantern bodies, JM-PhD-X1

    Hi Jimmy Would it be possible to have the programmer + display (Cheapish option 1) mounted in a small box such that they could be attached with velcro if desired but removable - plug and short umbilical perhaps ? ? ? Thus we may achieve relative cheapness and a display that could be mounted...
  14. petrev

    PWM Regulator-Mag D, JM-PhD-D1, UPDATE

    Hi Jimmy Just found I need one more than I thought ! My old PK1000W has a new problem ? I got some new DeWalt A123 packs and they seem too powerful - holding 35V+ after charge and not dropping as much under load ! ! ! So I really need a regulator now not just a soft starter to control the...
  15. petrev

    PWM Regulator-Mag D, JM-PhD-D1, UPDATE

    Hi Jimmy X1 ? ? ? ? ? ? ? How did I miss that . . . Just checking out the thread ! Great stuff - must read more . . . Love the digital rotary pot - nice idea with the display etc. - etc. Cheers Pete
  16. petrev

    HELP Please - Can you identify this Plug/Socket ? Make ? Model ? ?

    :hitit: :thumbsup: Big THANKS Christoph looks like Molex MLX http://www.molex.com/pdm_docs/sd/050841030_sd.pdf Cheers Pete
  17. petrev

    HELP Please - Can you identify this Plug/Socket ? Make ? Model ? ?

    :thinking: Anybody ? ? ? ? ?
  18. petrev

    HELP Please - Can you identify this Plug/Socket ? Make ? Model ? ?

    Hi 3 Pin - Tanged pins assembly Modular - Socket Board mountable - Plug with strain relief Approx size 20mm x 9mm (main body W x H) Entrys are very similar size to Tamia 2-Pin plug but body material is hard plastic and pins do not heat up when carrying 8 Amps + Any Help - Gratefully...
  19. petrev

    PWM Regulator-Mag D, JM-PhD-D1, UPDATE

    Hi Thanks guys My thoughts were that the Fluke should be the closest as it takes the waveform into account so good to get your input. Just need to find another Fluke so that I can physically check they are reading the same. 64275AX is a wicked bulb (especially as the AXial filament makes...
  20. petrev

    PWM Regulator-Mag D, JM-PhD-D1, UPDATE

    Hi Jimmy 3-Levels - Build 40.4% Full :D Setup for 5761 Measuring - Variations in method . . . So people ? ? ? What is the "real" output ? I am using SQRT(Vin*Vbulb) for now to be on the safe side as this is my last 5761 - looks nice and white at 100% Back to topic - Regulator is...

Latest posts

Back
Top