Search results for query: *

  1. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    :twothumbs
  2. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Cool - Thanks Jimmy, sounds like a plan. No mad rush - I will probably take some time to think about hosts etc. but I thought I had better grab a couple while they were still available. Cheers Pete
  3. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    :thumbsup: Back up again. None on hand . . . Maplin should have them if they don't miraculously appear in any parcels ! Cheers Pete
  4. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Yay :thumbsup: Thanks Jimmy. 15mA will probably suit best. Were the PWM connection diagrams on your site before ? I probably missed them . . . Also was there a link for the Rev.2 FW ??? I can only see 1a and 1b now ??? As always brilliant service, Cheers Pete
  5. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy These 5mm http://www.maplin.co.uk/5mm-rounded-panel-indicator-leds-and-bezels-35952 Red:2.0Vf Blu:3.5Vf see Spec. Tab or These 12V 8mm http://www.maplin.co.uk/8mm-12v-panel-mount-leds-with-chrome-bezels-36405 Red:2.0Vf Blu:3.6Vf see Spec. Tab Is the output 12V ? or 5V ?? or...
  6. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jim Thanks Jim From Low Batt (and Overtemp) - /Shutdown Output & Flash PWMA Output)(PWM Duty % when on) Trying to see how to implement this option with a LED - Need more info ???? What V do they output at ? Have you a standard setup PWM wise or have I missed or mis-interpreted something...
  7. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy Sounds like the right number ! Cheers for the Config File for 004 updated for rev.2 Can you load ones as per 004 but with just 2 levels (lose the LOW) and Low Batt warn at 20V Have you got any circuits or parts specs for the warning LEDs ? Bias resistors needed ? PWM ???? etc. . . ...
  8. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy Can't find the thread/posts where we discussed my settings for the first one ??? Low Batt is a bit high on my current one as the A123 cells sag under 35A load and trigger the low power before they heat up and get going properly :) Have you got my last set-up saved somewhere ? I'm...
  9. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy Can you PM me the total $$$ for 2x JM-PhD-X1 ---> UK + CC-PayPal Cheers Pete ps. Great Mod Hoop :twothumbs
  10. petrev

    Sold/Expired M-Zeppelin M6 LED heatsinks and builds, multi-aspheric beamshots added

    :thumbsup: :party:
  11. petrev

    Sold/Expired M-Zeppelin M6 LED heatsinks and builds, multi-aspheric beamshots added

    Yep - Nice large amount of light. LZ is the man for modified reflectors methinks as he knows the HS and the reflectors backwards !!! Not sure about the ongoing availability of any specific McR eg. 27L ? Are they still being made or is the Sandwiche place the last repose !? Might be good to...
  12. petrev

    Sold/Expired M-Zeppelin M6 LED heatsinks and builds, multi-aspheric beamshots added

    Now . . . 1. Never answer a PM from EasilyLed ! :wave: I have just converted his 3x P7 to 3x XM-L. Head Powered by 6x17500 using an STC Tail Some cut down McR27Ls may work even better with the smaller XM-Ls I think they were McR27Ls in the 4xMCE ? ? ? That is one of them. They fit the...
  13. petrev

    Sold/Expired M-Zeppelin M6 LED heatsinks and builds, multi-aspheric beamshots added

    Hi Updated the 4x MC-E to 4x XM-L HERE
  14. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy, Sorry it took so long . . . LK1400 (600W PAR64 GE Q4559X) with JimmyM PhD-X1 Driver :thumbsup:
  15. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Great Info Site :thumbsup: Thanks Jimmy
  16. petrev

    Sold/Expired Pre-Order JM-PhD-X1, PWM Lantern Regulator

    Hi Jimmy Will update you with specs when I can decide them ! ! ! :thinking: Cheers Pete
  17. petrev

    Sold/Expired SF M6 Short Tail-Cup for 2x C-Cell : 2x 26500

    Hi I haven't had any IMRs to try but the C-Lions worked with MN20 (overdriven ! Careful) and a PH5761 in my rig. There are lots of others to try ? ? ? have a look at info here SureFire M6 rechargeable options – SHOOTOUT (Part 1)...
  18. petrev

    Sold/Expired SF M6 Short Tail-Cup for 2x C-Cell : 2x 26500

    Hi :hitit: Just a bump to remind the world . . .
  19. petrev

    Sold/Expired <<< 2ND RUN >>> SF M6 Short Tail-Cup + 6x17500/AA Carrier

    Hi Justin The Last Carrier . . . All ready Extra Long Spring allows Original M6 BattPack without swapping TailCup Extra Short Spring Can be added to Centre+End if needed (for non spring Lamp Assemby) (also works as Tail Spring if preferred !) KIT STC +Carrier $70 (old$60) (Worldwide +$6...
  20. petrev

    Sold/Expired SF M6 Short Tail-Cup for 2x C-Cell : 2x 26500

    Hi The Short Tail-Cup (STC) for the SureFire M6 No Extension Required - Keep M6 Form Factor Fully Reversible mod to allow 2x C-Cell (eg. AW IMR26500 or AW C-Lion) Allows 2 cells up to 107mm total (53.5mm per cell allows for protected cells and button tops) 2x C-Lion Simply pull the...

Latest posts

Back
Top