Search results for query: *

  1. milwaukeeblues

    Perfect Mag Reflector: Cammed Version?

    I would take 2. The Camless are great! -Peter
  2. milwaukeeblues

    Flashlightlens clickie process kills McModule???

    Re: Flashlightlens clickie process kills McModule? The battery seems to be making contact. I'm gonna send the module to Charlie to look at (thanks Charlie.)-Peter
  3. milwaukeeblues

    Flashlightlens clickie process kills McModule???

    Thank you Don, your offer is very much appreciated. I'll see how Charlie responds and act accordingly. Don't see any broken wires (although my eyes are not that good for small stuff) but looking at the module from the back it seems off center in the casing, perhaps from too much experimenting...
  4. milwaukeeblues

    Flashlightlens clickie process kills McModule???

    OK, the McModule was my favorite flashlight but I had to go buy the Clickie switch. After that didn't work, I followed all the threads, scraped off the anodization, etc. Then Chris sent me a recommendation to test by holding the switch on the bare end of the light, and eventually another switch...
  5. milwaukeeblues

    Trouble with the clickie conversion kit

    1. Get an eyebrow tweezer, the kind with thin pointy prongs. 2. Insert the prongs in the two holes in the old switch casing. 3. turn counterclockwise. Good luck! -Peter
  6. milwaukeeblues

    Perfect Mag Reflector: Camless Version Offer

    Otokoyama Said: "I will try to order two more camless orange peels, one each for shiftd and Kill-O-Zap. The order is just in, so there shouldn't be any problem increasing it." Otokoyama, Any chance of adding another 2 camless orange peels to the order for me? I was away and missed the offer...
  7. milwaukeeblues

    NOW SHIPPING -- W3V McModules ! ! !

    Re: McModule Update: 7-11-03 Yes, it is great!!!!!!!! - Peter
  8. milwaukeeblues

    Fifteen Space Needle II's

    Re: Fifteen Space Needle II\'s >>there is some intense manipulation going on in the background between several people, mainly over whether the Pel M6 5W can be produced...<< Ooh!
  9. milwaukeeblues

    Space Needle II 2nds...

    Re: Space Needle I too would prefer the whiter Luxeons, and yes, I would love a pewter or purple SN II to go with the black SN I. (Sending an e-mail requesting to be put on the list.) -Peter
  10. milwaukeeblues

    Blaster II Flickering Recurrence

    Wayne, here's what I tried so far: 1. There already was a brass washer. I tightened both screws on the emitter board as much as I felt was safe (which was not very much.) Flickering continued. 2. Removed tailcap and the tailcap O-ring. I cleaned all the bare metal surfaces of the tail and...
  11. milwaukeeblues

    Blaster II Flickering Recurrence

    This seems to be the same problem I had before sending the light back to Wayne for repair. He returned it fixed, but the problem has recurred without any known precipitating event. Wayne, can you tell me how you repaired it the first time, maybe I can use the same procedure. Thank you, -Peter
  12. milwaukeeblues

    Space Needle!

    Well, the space needle walked in about ten minutes ago, and I can already tell that this will be one of my very favorite lights. Beautiful white beam, long throw, feels great in hand, just great. Charlie, is it safe to focus this light? I remember your warning about focusing the nexneedle...
  13. milwaukeeblues

    Best drop in for AA mini-mg?

    >> For a limited time, you can upgrade your Madmax or BadBoy to a Q3L emitter for $5 more. It's worth it, in my opinion!<< Oops. Sorry Wayne, I was not aware of that option! -Peter
  14. milwaukeeblues

    Best drop in for AA mini-mg?

    >>Not to be picky, but I'd perfer as white as possible. She's an ICU nurse, and I'd hate to find out the light wasn't up to "spec". Lives are on the line here, people.. I think I'd be willing to substitute bright white over long runtime to some degree.<< OK, this deserves a serious...
  15. milwaukeeblues

    BLASTERS HAVE ARRIVED !!

    Originally posted by bucken: "Can anyone else who has had this flickering problem verify if this fix, indeed, worked? I have not noticed any flickering yet (he knocks on wood), but will be lubing the dry o-ring, as it just makes good sense, anyway (thinking... Where did I last see that...
  16. milwaukeeblues

    BLASTERS HAVE ARRIVED !!

  17. milwaukeeblues

    BLASTERS HAVE ARRIVED !!

    Thanks Wayne, I will ship it back to you on Monday. Yes the tailcap was tight. Aside from the flicker problem, this light is so beautiful that I will miss having it for a while! Thanks for your help. -Peter
  18. milwaukeeblues

    BLASTERS HAVE ARRIVED !!

    Hi Wayne, I received the gold Blaster II this morning. I can certainly echo all the words of praise I heve seen in this thread. However the light seems to have a problem with flicker. The flicker takes the form of rapid changes between brighter and less bright light. It also happens when the...
  19. milwaukeeblues

    Blaster II or Trilight?

    Does anyone have a sense of how these two 3-D lights compare in terms of light output, throw, beam quality? They certainly take very different approaches (Yes, I know: "Buy Them both") Thanks, Peter
  20. milwaukeeblues

    Retainer clip for lambda Ill pill?

    Thanks Kevin, email sent. -Peter

Latest posts

Back
Top