Search results for query: *

  1. C

    Bad Review for Romisen RC-T6

    But it's a good mod host. How about 4300 lumens from 6 P7 Leds?
  2. C

    typical newbie "suggest a flashlight" thread

    I have one of those. It's junk. Notice their picture looking straight into the front of the light- the emitter is way off center. That's because the reflector is thin plastic and does not have anything holding it in place inside the head. The misalignment between the LED and reflector makes for...
  3. C

    Bad Review for Romisen RC-T6

    Look here.
  4. C

    typical newbie "suggest a flashlight" thread

    If you want to run your standard AA cells and you want a chance to try different beam profiles and user interfaces economically, you should get a Dereelight Javelin. It runs on 2 AA cells d has interchangeable P60 type light engine/reflector pill assemblies. There are many P60 style pills that...
  5. C

    rrt-1 rrt-2 budget copy

    I love saving money, but the Ultrafire lights I have purchased so far have been a total waste of money. They are the lowest quality of all my lights with loose, crappy machining and really terrible electronics. I've modded a few with better drivers, but they still have loose fitting heads...
  6. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part XII)

    Re: Why would anyone want this flashlight? UltraFire W300 OSRAM LED 1-Mode (2*D) You might like the new Lumapower 2C light.
  7. C

    AKOray AA & AAA Review + RUNTIME

    Re: AKOray AA & AAA Review Ordered on 1/19/2009, but DX didn't ship it till about 3 weeks later, which is about average for my orders from DX.
  8. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VIII)

    Re: BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part 8) Interesting. I can see the tailswitch protruding on your Tank007, but mine is recessed by a couple of mm.
  9. C

    AKOray AA & AAA Review + RUNTIME

    Re: AKOray AA & AAA Review The instructions you posted for Mode 1 and Mode 3 do not work on my light. If I soft press before the light starts ramping, or if I soft press immediately after the light ramps all the way up, then goes dark, my results seem random. I have mine programmed for low...
  10. C

    AKOray AA & AAA Review + RUNTIME

    Re: AKOray AA & AAA Review Mine comes off easily. I flipped over my mousepad so the rubbery surface was facing up then pressed the tail of the light against the pad and just unscrewed it.
  11. C

    AKOray AA & AAA Review + RUNTIME

    Re: AKOray AA & AAA Review On these lights it's pretty easy. I unscrewed the tailswitch assembly, exposing the negative end of the battery. Then just press one lead from the ammeter against the battery and the other lead against the exposed threads in the end of the tube. To switch levels...
  12. C

    AKOray AA & AAA Review + RUNTIME

    Re: AKOray AA & AAA Review Your AA model is broken. Mine only draws about 700ma from a 14500 cell. Mine is the newer programmable model.
  13. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VIII)

    Re: BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part 8) I have a TANK007 TK-701 SSC, DX 18630. The tailswitch is a metal cap over a typical plastic switch body. The whole assembly is just pressed in from the front of the tailcap. There is absolutely no seal of any kind...
  14. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VII)

    Re: Romisen RC-A8....New Product?? I remember seeing a not so good review on this light. I think it was in the Bessiebenny budget LED thread.
  15. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VII)

    Re: just got 2 x AA/14500 lights from DX ...AKORAY + ULTRAFIRE A10...very nice lights Thanks for the review. I've been looking at both those lights for a while now. I even went so far as placing them in my cart, but just never completed the order. They are very tempting, but I think I'll pass...
  16. C

    Bad Review for Romisen RC-T6

    Yah, I really like mine. I just wanna replace the switch with a single mode clicky so it's either off or all on. I hate cycling through the modes and the only time I get this light out is when I need lots of light so I end up going to high anyway.
  17. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VI)

    Re: Anyone has an Ultrafire C-2 TWO STAGE? I have DX part 9631, UltraFire C2 and it has a two way switch with a resister in the tailcap.
  18. C

    Bad Review for Romisen RC-T6

    The only way to get it apart without damaging anything is to first unscrew the bezel and remove the lens and reflector. This lets the LED assembly float free so you can unscrew the head without twisting all the wires. My bezel was glued tight. I gently whacked the head of my light against the...
  19. C

    Bad Review for Romisen RC-T6

    That's coming :D. I don't have my soldering iron handy right now, but I will be testing LED voltage and current.
  20. C

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part VI)

    Re: BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part 6) Here is my test comparing AW to grey Ultrafire cells from DX. The AW cells hold a slightly higher voltage, and the UF cells run just a little longer. My 4 AW cells show quite a wide range of performance. I'm...

Latest posts

Back
Top