Search results for query: *

  1. N

    Time to retire "Luxeon Lottery" and find the right term for today's LEDs

    Re: Time to retire "Luxeon Lottery" and find the right term for today's LEDs I like ROTD for "Roll Of The Dice". //NYLYTE
  2. N

    Review: DealExtreme DX X1, Runtime Chart Added...

    Re: Review: DealExtreme DX X1, INVITATION CODES AVAILABLE I would like to reconfirm despite the fact that the DealeXtreme site is currently unavailable. cc.: via PM //NYLYTE
  3. N

    Review: DealExtreme DX X1, Runtime Chart Added...

    Re: Review: DealExtreme DX X1, INVITATION CODES AVAILABLE I'm in for an invite code if you have any more available.
  4. N

    Finally received the MDXL Cree and Ultrafire C3

    The Ultrafire C3 is a really nice cheap light. An eyeball comparison shows the C3 to be just about on par with my Elektrolumens XM-3 which employs a Luxeon III and uses 2 AA cells. The C3 has a slightly tighter spot, but otherwise the light output results in a pretty much dead heat. I have...
  5. N

    Ultrafire C3 Cree

    Yep, same thing here. It seems that the threaded section toward the front of the light is a hair too long. The flat face of the battery tube catches on the back of the "light engine" or "pill" and causes it to screw deeper into the head, compressing and expelling the o-ring before the back of...
  6. N

    REXLIGHT 2.0 AMPERAGE DRAW?

    I bought several. The first I have tested with 2000mah eneloop and 2500mah energizer NiMH cells. I am afraid the thing may be dangerous. I left the light standing on its tailcap on high for an informal runtime test. After about 10-15 minutes the LED cut out. About 15 minutes after that I...
  7. N

    Looking for cheap small UV light..

    The lighthound link redirects to the main page. Please explain which of the (currently) 7 different UV lights they stock you mean to indicate. The CPF thread begins with questions about a 12 LED light from lighthound, but it is not clear what you are pointing to...
  8. N

    If you were a cop/are a cop, would you use a modified light?

    How do you think the citizens of your fair county or town feel to be on the receiving end of your light, not to mention your attitude?
  9. N

    Summer camp 1xAA LED

    Hmm, the powerlight looks like it fits the bill for much less money. This is good! Has anyone here done a runtime test on the critter? I would like to thank everyone for their input. While the solar and/or rechargeable scenario has a certain appeal, neither will be practical in this...
  10. N

    Summer camp 1xAA LED

    I am looking to buy a set of cheapish LED flashlights for my friends' children to use at summer camp. I am wondering if the Ultrafire C3 (Cree) would be an appropriate choice, as it is touted to run on everything from NIMH to LIion? My expectation is that the kids will be sent off with a...
  11. N

    More efficient DC/DC conversion? New TI chip.

    I managed to find a link to the data sheet. The first link redirects to the second. I am including both links just in case. http://www.ti.com/lit/gpn/tps61200 http://focus.ti.com/lit/ds/symlink/tps61200.pdf
  12. N

    More efficient DC/DC conversion? New TI chip.

    ...(flashlight) runtimes quite a bit. It might be all hype, but here is the link: http://www.theregister.co.uk/2007/03/30/ti_voltage_boost_chip/ *EDIT* Here are links to the data sheet. The first link redirects to the second. http://www.ti.com/lit/gpn/tps61200...
  13. N

    Positive LED slug epoxy trick

    Gryloc: I'm not sure that all milk cartons are coated with LDPE. The thicker, slightly waxy feeling deli container lids are what I use. I suppose that the plastic lid from a steel coffee can should do the trick. Just look for the LDPE (4) recycling triangle molded into the plastic...
  14. N

    Positive LED slug epoxy trick

    ...electrical isolation is necessary. Arctic Silver, both heatsink compound and epoxy are electrically conductive. The Arctic Alumina products are *not* electrically conductive and should be used where a thermally conductive electrical insulator is required. //NYLYTE I have just checked the...
  15. N

    Positive LED slug epoxy trick

    It seems that a number of people doing upgrades and mods have been bitten by the fact that the SSC (Seoul Semi-Conductor) emitters have a positive slug much like the red and R/O (Red Orange) luxeon emitters and stars. I have seen advice in the forums to cure a thin layer of Arctic Alumina...
  16. N

    How much damage can an E2D do?

    I really find this thread disturbing. The premeditation of intentional injury I read here verges on the criminal. I can understand that a law enforcement officer is authorized to use lethal force in certain circumstances. However, the cute little animated icons of head bashing with...
  17. N

    What are those lights in many new stores? (WHITE!)

    Re: What are those lights in many new stores? (WHI What does HID mean? The particular "HID" that most people assosciate with the term "HID" (High Intensity Discharge) is "Metal Halide". Of the different varieties of HID, including High Pressure Sodium, Low Pressure Sodium, Mercury Vapor, and...
  18. N

    Nuwai Q-III observable flicker?

    I cut open the second package (much better color), and double checked my initial impression. I invite you to swirl the hotspot in a tight circle and observe what I might term slurring. This effect is far less pronounced on a directly driven light. Overall I think the Q-III rocks. I bought...
  19. N

    Nuwai Q-III observable flicker?

    I am in receipt of two Nuwai Q-III lights and I am not sure that I can believe my eyes. I think I am seeing a high speed flicker from the boost converter. This is not necessarily bad. If I wave the beam across a wall I can make out dark bands indicating that that the LED is being pulsed. It...
  20. N

    MXDL 3Watt "Luxeon" 3AAA from eBay

    Re: MXDL 3Watt \"Luxeon\" 3AAA from eBay The emitters in the two 3 Watt MXDL flashlights I received are both low dome "batwing" style. I am wondering if the reflector design will provide a smoother beam with less pronounced rings if the emitter is swapped out for a lambertian high dome...

Latest posts

Back
Top