Search results for query: *

  1. A

    TechLite?

    Maybe someone can confirm this: I observed that desoldering microcontroller pin 2 (next to pin one, which is marked by a dimple) accomplishes the following: -reduces parasitic loss to .07mA from ~.13mA (it spikes to .2 briefly when standby is first entered then settles to .07) -eliminates...
  2. A

    Costco Techlite Lumen Master

    I managed to get it apart the way you described. I just needed to add something to improve the friction under the crappy strap wrenches I had been using that led me to believe it was thread-locked. The current when the tailcap is bypassed is significantly higher then when in place; the...
  3. A

    Costco Techlite Lumen Master

    It is pretty loose if the focus adjustment is not tensioned up against it; I just used one flathead. If it was more stuck, I'd use a set of needle-nosed pliers (alternatively, there are of course purpose-made wrenches for this purpose).
  4. A

    Marketing Hype

    I just bought a 3-pack for ~$17 and the package more reasonably claims 100 lumen ON HIGH and 4 hours run ON LOW. Looking at the graph someone posted, I wonder if they are only regulated on LOW. One of the three lights is dramatically whiter then the other two, which are more neutral. Also, I...
  5. A

    Costco Techlite Lumen Master

    How much more length is needed for the 18650? The rear cap can be unscrewed several MM and still be waterproof and have plenty of thread but more interestingly: If you remove the battery holder and look down the barrel, you will see that the LED heat sink has two notches that allow unscrewing...

Latest posts

Back
Top