Search results for query: *

  1. pyro

    Anyone done this? G2 + KT1

    One of my favorite lights is the G2 / G2z coupled with the SRTH. Much sleeker looking than the KT1.
  2. pyro

    G2Z waterproofness

    Hi folks, you could add about forty two o-rings and it would not help at all. I had the same problem when i got my G2Z. Found out that i even could blow air through the tailcap! (while changing batteries) The fix: -Tear the spring out of the tailcap -Find a fitting hex wrench and screw out the...
  3. pyro

    My LF HO-9 Went...

    Very good pictures!
  4. pyro

    Surefire backwards batts

    There is no difference at all with an incandescent lamp. The lamp did not fail because of the backwards inserted batteries.
  5. pyro

    Any higher output lamps for E1e?

    look here this (if available again) gives a real HOLA for the E1e but may require an unprotected cell
  6. pyro

    Any higher output lamps for E1e?

    you can get an adapter to power a strion bulb from one RCR123
  7. pyro

    Rechargeable A2?

    Now that is strange, both of my A2 run without the bulb inserted! I had to tighten the bezel a little more as usual, but it worked. On the other hand, why do you want to remove the dead bulb without having a new one to swap?
  8. pyro

    M6-R

    Can´t agree here, if you have one each standard M6 and M6R you can easily tell which one is tha M6R. But it is not too noticeable in actual use, except you want do fast blinking signals.
  9. pyro

    Just bought a new M4

    M4 comes from the factory with MN 60 and MN61 The "superbulb" is the N62, rated with 500 Lumens/12 minutes.
  10. pyro

    Modified Mag Focus Questions

    The high power bulbs don't focus to a spot as tight as the stock bulbs, because their filament is much larger.
  11. pyro

    What's wrong with this picture?

    i guess they call it 18V that people don´t use their MN15/MN16/N2 lamps in it and onder why they only last a short time....
  12. pyro

    Do turbo heads "need" a glass lens?

    Re: Do turbo heads \"need\" a glass lens? At $60 i´d try if it stands against the heat. And from the picture it looks like a glass lense can be installed if really needed.
  13. pyro

    Question about A2 and Incan regulator

    P60 isn`t realy brighter than the A2.. I general, the regulator delivers a fixed voltage to the bulb, that maeans the bulb can be exchanged for one that needs the exact same voltage. There is no easy way to do so (except the M6R, hehe)
  14. pyro

    Need your opinion on Surefire

    Look for a 3" K head. Even the 65 Lumens of the N1 lamp give impressive throw with these IMHO. (Click on pictures for larger view)
  15. pyro

    Rechargeable A2?

    Look at the LED board, there are resistors for each LED on it. These can be exchanged and nothing else is needed, as the xenon beam is already regulated and will work with the higher voltage. (Willie Hunt LVR) I look for an extra LED ring some time now, to swap out the LEds wit newer ones...
  16. pyro

    Opinions on SureFire 8AX?

    I also have "only" an 8NX. Beam isn´t as smooth as a P60, but not really bad. No LOTC, and no posibility to use a remote switch. And the weakest point: The B90 Battery packs suck. Even if you get one that works reliable and holds charge, the runtime is still quite short. Make you one or two or...
  17. pyro

    I dropped my A2 from waist height!!!

    It is, after all an incand light, and these bulbs are fragile, no matter if they are in a Surefire or somehting else. Maybe a shock isolated bezel would have helped, but even these are not "designed to be dropped" That said, i dropped my own A2 more often than i can remember, sometimes on...
  18. pyro

    MY MN03 blows yet again

    What type of batteries are you using?
  19. pyro

    How long (hours) do Pila LA's last?

    Re: How long (hours) do Pila LA\'s last? I have a G4 which has at least 30 charges on it. Maybe that is not typical because the Same bulb can be driven with 4 CR123, so it is likely underdriven on the rechargeables.
  20. pyro

    Max temp/load of UCL with LDF film?

    The LD film is Lexan, so i highly doubt that it will stand angainst the heat.

Latest posts

Back
Top