Search results

  1. F

    Jetbeam's Service is ridiculous!

    Hello, i have some trouble with my TCR 10. I purchased it..maybe last year. When it arrived, everything was ok. Carried it around a bit, put it to use. After around 3-4 Days i noticed that i could not turn the ring anymore. That was the moment i thought, how hard could it be. As i am not...
  2. F

    Looking for a driver, 4S LiIon + 7 XP-G in Series

    Hi, i have a 40mm board with 7 xp-gs wired in series. it can be powered up to 1500mA and a dimming function would be great (3 modes pwm e.g.). i would like to power it with 3-4 18650's. (3S: 10.8V-12.6V or 4S: 14.4V-16.8V) 4 18650s would be fine. Vf is at around 18V. Space for the driver is not...
  3. F

    Any Reviews about the Skyray 2x18650 XM-L

    Hi, just wanted to ask if anyone knows something about the quality of this.light. Looks pretty unique and has a huge reflector, so it might throw very well...haven't found any reviews about it yet. Available as skyray or uniquefire with 1x18650 or 2x18650 xm-l t6. Click for 1x18650
  4. F

    Vent without Flames, shortcircuit due to bad heatsinking. xm-l unsoldered itself!

    Hi, Pictures first: Sold a flashlight to a co-worker, he had it the 1.st day. Used it for an hour for troubleshooting in a boeing 767. then he said that it got warm, wouldn't go on and started to smell..... from the pictures you can see that this is an ultrafire c8 host. but the...
  5. F

    Any experiences with this driver? (P7/MC-E/XM-L 2.8-3A 2.7-4.2V)

    Hi, i recently was browsing ebay and found following driver: [ebay# 290516945697] LED Driver Circuit Board für Cree MC-E/SSC P7 2.7-4.2V The price is great and i purchased 4 of them for under 10 euros. they arrived today and i built one together with an xm-l in an...
  6. F

    Driver needed for 3x XP-G with 8.4V max input

    Hi, i'm looking for a driver to drive 3 xp-g in series with 3 modes, either parallel or in series. Input is 8.4V max, by 2 li-ions. does anyone have an idea? I already tried searching, but in parallel, there is not much, that supplies up to 4.5A. And i can't take any solutions that need to have...
  7. F

    looking for reliable 2xAA 2-mode light...

    Hi, i'm going to visit a friend in africa in the end of october and was thinking about bringing him 2 lights as a gift for him and his wife. Now, i would like to bring something useful which is not draining batteries excessively but also doesn't just dimly glow...I was also thinking about an...
  8. F

    Just killed another sst-90...

    Hi, just wired up a d2flex in a 3C Mag with an sst-90 on a britelumens heatsink. attached the sst-90 with some 2-compound heatsink glue (which was intended for computers and never did a bad job yet (except on the 1.st sst-90 that died the same way)... It was pretty bright, but started to...
  9. F

    Sold/Expired WTS: Nailbender Linger Special XP-G R5 P60 Drop-in

    Hi, received my new Nailbender Linger Special P60 Dropin, Dual XP-G R5 tint 1b two days ago and i'd like to sell it. Maybe 8 Minutes Runtime on it. Comes with high-speed tape around for better heat transfer, has small marks on the fwd corner of the reflector from contact with the lens...
  10. F

    Question on light at ebay ("K88...")

    Hi, just found this on ebay and i'm wondering about the light. [link deleted - DM51] I know that 20 bucks is not much for a light, 2x 18650 + 2...lets call it chargers...and the fact that there should be a cree mc-e in it..but, the reflector looks pretty good and the fact that the charging...
  11. F

    My Girlfriend left me....

    Hi.. yesterday my girlfriend started discussing with me..she said she felt caged, even if she knew that she wasn't...and she remembered her old life before she met me and these and that and she likes those memories and whatsoever.. I said her if she doens't want to have a relationship, then she...
  12. F

    Hobby charger for all kinds of chemistries?

    Hi, i'm looking for a good charger, which also shows the energy which already was loaded into the cell. should be suitable for nimh, li-ion and maybe able to load more than 1 cell at a time and batterypacks... are there any good chargers that suit my needs and don't cost like 200$?
  13. F

    Question to low-voltage warning on sb driver

    Hi, just wanted to know if there is a method to get rid of the low-voltage-warning on the sb 3-mode p7/mc-e/sst-50 7135-driver... As long as i work with protected 18650 it's just stealing runtime in my eyes... any ideas would be much appreciated ;)
  14. F

    How to disassemble Leatherman?

    Hi, i'd like to reconfigure my leatherman crunch..does anyone know how i can open it? I'd prefer to have the can opener of the wave on the crunch :D
  15. F

    Sold/Expired WTB: Mag D Tail Clicky

    Hi, i'm looking for a tail clicky mag d tailcap, should be black. condition can be used and beat up, as long as it's reliable... Thanks
  16. F

    Wiring D2flex...

    Hi, just got my d2flex from taskled today and i'm kind of worried about the resistor i need to limit the current. I'm planning to use a WM-F3 bin SST-90 and a 3-cell sub-c nimh pack. maximum current of the d2flex is 6A, is that correct? So, according to taskled's website: [/FONT] So, at the...
  17. F

    3-Mode Driver for XP-G needed...

    Hi, i'm looking for a driver and can't find any.. I'd like to have 3 modes and up to 1.6A would be pretty nice...power source is 1xli-ion and host is a shortened d-mag. I'm out of ideas at the moment and don't know what i should put in, i have a 5-mode driver here, but 1A seems a bit low to me...
  18. F

    Fenix P3D Upgrades?

    Hi, just thought about putting an xp-g in my old fenix p3d q5...anyone ever thought about that (except me^^)? it doesn't get plenty of use, since i mostly prefer one of my multi-emitter lights..except the akoray k106 xp-g :D...but however, is that a lot of work? anyone ever disassembled a fenix?
  19. F

    Efficiency of SST-90 at low drive current?

    Hi, i just saw the good deal on sst-90 leds at 4sevens and i was thinking about getting one maybe to replace a p7. however, i don't want to change the driver, so the max drive current would be around 2.5 Amps, mostly less for low + med mode. How much output would an sst90 produce at this level...
  20. F

    Dead die on mc-e

    Hi, last week i forgot my mc-e powered flashlight at work for 10 minutes (power on) above the ceiling in an aircraft...when i came back it was damn hot, almost too hot to touch, so i just switched it off and took it apart to get the heat from the cell (trustfire 18650, 2500 mAh stated...

Latest posts

Top