Search results

Wurkkos
fenix-store
  1. R

    Don Kellers last hurrah- the Brinkmann Legend

    I also have a few of these lights (bought a small lot on eB), but mine are labeled Bluepoint and they are black on black (black body, black head sleeves).
  2. R

    Don Kellers last hurrah- the Brinkmann Legend

    Byk, does that Malkoff drop-in work with no modification in the Brinkmann? I have a couple of these Maxfires, one with a 3.7V swapped incan drop-in and it would be super cool to use the other one with a Malkoff.
  3. R

    Short review - Keeppower 3V RCR123A

    I hear ya on the 16650s, however 16650s in the Surefire P2X Fury Intellibeam suck and give lower output and dwindles pretty quick. The KeepPower RCR 3 volt batteries in that same light worked much better than I expected and will use them there now.
  4. R

    Short review - Keeppower 3V RCR123A

    Picked up two sets of these, originally planning to run them with xenon lamps, but blew two back to back. Turned out they only fit my P2X Fury Intellibeam (did not fit my other LED 2 x cr123 Surefires. These batteries gave me 52 minutes of runtime before protection circuit kicked in.
  5. R

    Odd performance with lumens factory lamps

    When I saw this post, I was hoping for the same result using these Keeppower RCR 3 volt batteries. However, I blew 2 P60 lamps with them, using a 6P light. Did you let them rest when using them on a P60 xenon lamp? Or did you use them off of the charger? If they are regulated to 3 volt, I...
  6. R

    Incoming - What do you have coming in the mail??

    Malkoff M61W SST-20 Malkoff M61WL SST-20 *although the website does not say hi cri in the description, I'm hoping they are. Maglite 2C Cell incan, gray (old school) Eagletac S25LR XHP HI NW (used) Eagletac P200C2 XPG-2 NW module (CR123x2) (used) *two extra modules in CW Eagletac P200A2 XML-2 CW...
  7. R

    Maglite Spectrum 2xAA PWM on NiMh batteries, 69 lumen mode :^(

    Just received a Mini Maglite Spectrum 2xAA and it came with Energizer Alkalines. Put in some Eneloops and when I turned it on, the high mode, 69 lumens, is not at full output (clearly lower output) and has PWM. It is not very obvious and is a "high rate", but it is noticeable and lower output is...
  8. R

    Incoming - What do you have coming in the mail??

    Hadn't bought new (or new to me) lights in a while, but got the urge on stuff that I'd been wanting, searching for. Probably take a break again? We'll see 😅
  9. R

    Incoming - What do you have coming in the mail??

    One of my Surefire incan collection favorites. I have one in mint condition and play with it once in a while 😆
  10. R

    Incoming - What do you have coming in the mail??

    Eagletac D25LC2 Nichia 219B *replacing my beloved 😞 D25LC2 XPG-2 Neutral, 2amp factory custom (special ET run when they came out) Eagletac MX25L3C Nichia 219B x 6 (Base Model) *always wanted one, I know, old tech, not super bright, but who cares 😆
  11. R

    Incoming - What do you have coming in the mail??

    Maglite ML150LR(X) Maglite ML150LRS(X) Surefire Fury P2ZX Maglite AA Mini Mag Spectrum Series
  12. R

    Streamlight TL3 is pretty awesome

    Also have a TL3, with focusing feature (also a TL2, NF2, Scorpion, and Polytac incans, all NOS, have focusing beams). I run it on 2x16500 IMRs. A really nice incan light. I've also tried a Tad Customs 7212 bulb and works just fine. I even run a Tad 3718 bulb in my Scorpion, but limit it due to...
  13. R

    Flickering light with SF Fury Intellibeam when using Li-ions?

    Hey Olumin, I know this is an old post. I just got a Fury Intellibeam (non DF) and yes, you are correct. My light also does that flicker when it auto-ramps/auto-sensing down to a lower brightness and it stays on that brightness. I also detect, what I can tell is PWM-ish, because if I wave...
  14. R

    Incoming - What do you have coming in the mail??

    I've got two of these adapters too and like them very much. One for my Maglite 2C twistie and one for my Maglite ML50L 2C. Awesome set ups.
  15. R

    Incoming - What do you have coming in the mail??

    Maglite ML50L **Upgraded 705 lumen model 3C to 21700 3D printed adapter from a member on here. 21700 KeepPower battery Should be a nice combo for my night walks.
  16. R

    Will I turn into a Maglite fan once again?

    I think this worked? Yes! I figured it out! :crackup:
  17. R

    Will I turn into a Maglite fan once again?

    Yates - I don't know how to post pics :shakehead, but I could PM them to you from the listing, if you'd like to post. I see you do know how to post pics.
  18. R

    Will I turn into a Maglite fan once again?

    Thanks Byk
  19. R

    Will I turn into a Maglite fan once again?

    Hey all, did Maglite update/bump up the output of the ML50L 3-C cell model to 705 lumens? I came across one on the bay and purchased. I was searching for the ML50L 2 or 3 cell model specifically, noticed that many of the 3-C cell models are reasonably priced. I kept scrolling and scrolling and...
  20. R

    Surefire Generation X (G2X, 6PX, P2X, etc.) Lego-bility

    Just depends on your light. I was able to remove, by hand, head of: P2X Fury (no spring head) G2X Fire Rescue (bright yellow) P2X Defender G2Z Maxvision 6PX Defender I have my P2X head on the G2Z MV body and the MV head on the P2X body. The P2X Defender head on the Fire Rescue (yellow) body...

Latest posts

Top