Search results

Wurkkos
  1. P

    D Lithium rechgeable 3.7v 7500mah-Feeler...

    is this a dead end?
  2. P

    D Lithium rechgeable 3.7v 7500mah-Feeler...

    any news?
  3. P

    Dorian SQCTP

    More language barrriers! ISO = metric ANSI = UNC/UNF right? Yes, the clone toolholders I have use M10 setscrews. I don't have experience of quality holders such as Dorian and Aloris, but guess that they use UNC threads as they are made in US. These M10 stainless dog point screws are a straight...
  4. P

    Dorian SQCTP

    Just reporting back after your helpful comments guys. You were right of course and the 200 series clones are equivalent to BXA size. Here in UK the Dorian new new new SDN30BXA (triple wedge) appears unavailable, and shipping a heavy lump from Rocky at Ajax was way tooo pricey (around $800 for...
  5. P

    D Lithium rechgeable 3.7v 7500mah-Feeler...

    Great to see someone picking up on these - good luck with the GB project! I have been very happy with the 7.5ah D cells I purchased from AGM, but just to say that my cells are flat top and need a contact blob added if used in series. john
  6. P

    Dorian SQCTP

    Aha! Thanks guys - I'm not that familiar with the AXA, BXA etc codes over here - so it looks like my clone 250 series holders need a BXA series toolpost....... back to the wishing well....
  7. P

    Dorian SQCTP

    Will Can you say whether the standard clone toolholders (250 series) fit the DTM AXA toolpost? I am thinking about changing my clone toolpost (code 250-200), but have quite a few holders (16mm tools) - will they fit the DTM? If not I might be tempted by Barry's Dorian AXA set! John
  8. P

    Battery pack for Osram 400W 36V

    18650 will explode at this sort of current draw :poof: I used the 36v 400w bulb in this http://www.candlepowerforums.com/vb/showthread.php?t=195049&highlight=hozelock
  9. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    :paypal:for balance $104 28. plasmaman ------------(5700K) mode no.1 (L, M, H, Strobe & SOS) thanks!
  10. P

    Stanley H.I.D. and 1365 lumen spotlights (Part 2)

    After much trial and error I believe I have sorted the Stanley replacement battery problem. By driving the light via the 12v charging socket - see pics - I can run a hot 16.4v pack without the PCB cutting in, and also charge the pack safely using my BC6 charger connected via the 12v socket...
  11. P

    Stanley H.I.D. and 1365 lumen spotlights (Part 2)

    There's no way that you can use the stock recharging socket on the back of the Stanley if you change the cell type. If using Li cells as a replacement for the SLA, you MUST only recharge the pack by a direct connection. So with that in mind the first thing I did was add a new recharging socket...
  12. P

    Stanley H.I.D. and 1365 lumen spotlights (Part 2)

    Just thought I'd add my bit on Stanley's HID. Finally got mine via a pal who was visiting the US, and he brought it back to UK for me (Amazon 70 bucks version). Opened it up rightaway and found that the SLA battery (which is rammed in there) had chaffed the neg out of the ballast down to bare...
  13. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    5700K - fantastic. I WILL WAIT!!! Thank you.
  14. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    Looks like the 5700K didn't come through.... So can I go with the default 6500K please????
  15. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    I'll stay with 5700K in that case, and be very patient! :popcorn:
  16. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    If its OK with you I'd like to wait and see how the 5700K delivery time works out. Will you order them if it is a 13 week leadtime? John
  17. P

    Sold/Expired Pocket Rocket - 6th run SST-50 with 18650

    Me please! $30 on the way for: 1 x aluminum HA with: SST-50-W57S-F21-GJ200 -----> 5700K Low, Mid, High, Strobe & SOS GITD switch cover thanks john
  18. P

    Hi! I wondered where (in UK?) you got hold of the LD010C for your 10A buck switch post...

    Hi! I wondered where (in UK?) you got hold of the LD010C for your 10A buck switch post...?? thanks John
  19. P

    SST-90 current draw - confused??

    Thanks to everyone so far....its quite interesting! My DMM is a middle of the road $50 jobbie, so not high end by any means. I decided to try a different method - I removed the cell pack and rigged up the light to run from my DC bench supply. Set V to 3.8 and switched on to low and then stepped...
  20. P

    SST-90 current draw - confused??

    The Luminus spec sheet says vf of the SST-90 is 3.87v at 9A I have measured the voltage on the battery pack at full power at 3.88v...... so - I'm still confused!

Latest posts

Top