Search results

fenix-store
Wurkkos
  1. F

    Good mods to perform on a Surefire 9P and Surefire M3?

    With 17670 and 3,7V-13V 130 lumens, output is not regulated, but you have more runtime (8 hours with 18650, maybe 6 hours with 17670). Output is diminishing over time. I've tested the 3,7V-13V 130 lumens with 2x R123's and 3x R123's, it's OK. Output is regulated from ~4,8V with this dropin...
  2. F

    HO-9 High Output 9V Lamp - 320 Lumen in SF 6P

    With 2x 18500's in Wolf-Eyes 9AX, I have noticed more power from the HO-9 compared to Surefire M2 + 2x AW high current RCR123's. HO-9 runtime tested : - with 2x AW RCR123 : 22 minutes - with 2x 18500 Wolf-Eyes 1400mAH : 40 minutes
  3. F

    HO-9 High Output 9V Lamp - 320 Lumen in SF 6P

    Right. I've tested runtime with HO-9 + AW RCR123s. 22 minutes before noticiable dimming. 35-40 minutes runtime is correct with 18500's.
  4. F

    Cracked my last Raider Bezel....

    +1
  5. F

    Cracked my last Raider Bezel....

    If W-E could provide landyard rings like Surefire, it will be a good thing. We could attach a landyard, and avoid the accidental dropping. Or W-E could provide bezel with better glass quality, maybe Tempered glass or Pyrex glass, don't sure however. I own myself D2AX Defender and 9AX Raider...
  6. F

    Wolf-Eyes D2AX

    The D2AX switch looks like the 9AX swith.
  7. F

    Wolf-Eyes D2AX

    You are right. Tailcap and bezel are different. Body is the same (Sniper body). As the body is the same, I think you can swap the bezel of the D2AX to 6A classic bezel (sold separately @ PTS-Mike for $12.95), if you prefer the 6AX bezel over the crenelated bezel.
  8. F

    Wolf-Eyes D2AX

    D2AX and 6AX are the same. Only the bezel is different. 18650 fits. I use protected 18650 from AW in my D2AX.
  9. F

    EO-6 in Surefire G2?

    With HO-4 and 17670 (or 169B), no problem ! You can even use the EO-4 lamp with 17670.
  10. F

    EO-6 in Surefire G2?

    P91 draws too much current (~2,5A) to work safely with 2x17500 cells. It's better to buy A19 extender and 2x17670 cells. Size will a little longer off course. 18500 cells (1400-1500mAh, depends on manufacturer) will work with P91, but unfortunately Surefire bodies don't accept 18,5mm cells...
  11. F

    Wolf-Eyes 9AX bulb : current draw ?

    You have the new module (3,7V-13V) or the old (3,7V-6V) ? PTS Mike says soon he'll receive new modules : - Cree 700mA or 1000mA for D26 - Cree 1000mA+ for D36. Voltage range for both : 3,7V-13V. I'm wainting these new drop-in, hoping regulation will be excellent.
  12. F

    Wolf-Eyes 9AX bulb : current draw ?

    Thanks guys for explanations. I've putted the HO-9 in my 9AX. It's true I see a difference in brightness when use with 2x 18500 compared with 2x RCR123. Much bright and whiter too. The standard 200 lumens W-E LA is installed in Surefire M2 with 2x RCR123's. Safer for the cells, because...
  13. F

    Wolf-Eyes 9AX bulb : current draw ?

    Does someone know the current draw for the standard 200 lumens lamp assembly delivered with the Wolf-Eyes 9AX ? I want to compare the current draw with the HO-9, wich seems to be more powerful visually (1,55A).
  14. F

    EO-6 in Surefire G2?

    Heat will be maybe a problem in the G2. It's better to send a mail @ Lumens Factory and ask the question. For compatibility with Surefire, I have used the EO-4 (current draw 2,35A @ 3,7V) in my Surefire M2 + 17670 with no problem. Same thing with my HO-9 + M2 + 2x AW RCR123 750mAh. No problem...
  15. F

    EO-6 in Surefire G2?

    I had the EO-4 (3,7V 190 lumens). I say "I had" because last night @ work my bulb blew up. Premature dead after only 1 hour use. I've sent a mail to lumens factory and they will ship another lamp assembly. Great service ! The beam of the EO-4 is a thrower, but you have also sidespill. I like...
  16. F

    EO-6 in Surefire G2?

    I've read in some posts that bulb lumens is 2/3 of torch lumens. Thus, real output about ~133 lumens with EO-6. Let say 120 lumens. Not bad. But you must think about heat. G2 is plastic lens (polycarbonate or Lexan ?), and you have the risk of melting the lens. Cree/Seoul and generally...
  17. F

    SF M3 + MN11 + 2x17500, what runtime?

    You can always but an DETONATOR extender for Surefire @Lighthound : http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=1102 You keep the CombatGrip function, but it does the flashlight a little bigger, but very "sexy" ! Look at this post ...
  18. F

    Lumens Factory E series bulbs

    For better brightness with only little less runtime, it's better to buy the HO-E1R (50 lumens), and runtime is about ~45 minutes with a RCR123 3,7V and ~100 minutes with 17670 cell. Some people says that this 3,7V 50 lumens is much bright than the 3V 40 lumens. Do a search in the forum about...
  19. F

    SF M3 + MN11 + 2x17500, what runtime?

    I think 2x17500 cells will be a little weak, or just OK for continuous use with the 225 lumens LA. Current draw from MN11 must be ~2.2A minimum, and the 1100mAh cells can draw only 2.2A safely. If the Surefire flashlights could accept 18500 cells (1500mAH but thicker), no problem for the...
  20. F

    9P or E2E?

    Very interesting project. I'll keep an eye for that. It would be good that the drop-in have a flat regulation (constant current). Very important point to me.

Latest posts

Top