Search results

fenix-store
  1. Lithium466

    A Tribute to Nitecore D10

    Oh oh, it's been so long I wouldn't listen to myself ;) Plus I only ever had a D11.2, back in the day I had put a Nichia 219A in it! 2700°K LH351d sure sounds interesting...I have Novatac and HDS that could use a led update. As for replacing a XR...it's been way too long for me to remember...
  2. Lithium466

    A Tribute to Nitecore D10

    The one on the right would be a direct swap! The other one would be a little bit trickier to get the led centered, but that's totally doable too.
  3. Lithium466

    Jetbeam RRT-01 and Niteye Eye10 rotaries, LED mods, beams, lumens

    Interesting lights and nice pictures!
  4. Lithium466

    One EDC flashlight to rule them all.

    Thanks, that's what I was thinking !
  5. Lithium466

    One EDC flashlight to rule them all.

    Would you share your source ?
  6. Lithium466

    NovaTac EDC T and E Models CRACKED! Back Door/Easter egg found!

    Interesting ! I didn't dare trying, I dread the 250 clicks^^ Are you sure you did a factory reset and nit just a battery detect reset ?
  7. Lithium466

    HDS Mods, what did you do to yours?

    Just swap your led and see..worst case you swap back...or you put a Samsung high CRI for more lumens !
  8. Lithium466

    HDS Mods, what did you do to yours?

    Makes sense, it will be calibrated to the higher possible value within the power "envelope" admissible (I think something like 3,6W at the led and around 4,5W at the battery). My money is it will become a 170, perhaps even stay a 200 ? Take a XP-G R5, is it really much more efficient than the...
  9. Lithium466

    XPG3?

    Even in the warmest tints like 3000°K ? Generally that helps with green tint. Problem with XP-G3 seems to be the tint shift...
  10. Lithium466

    Zebralight SC64c

    Also the "old" 62c and d had the Philips emitters, not the most efficient but generally great tint and tight hotspot.
  11. Lithium466

    The Tint Snob Thread

    A few Philips or Osram emitters also have very nice tints (mostly older generations), but not at Nichia's power level. Same thing with the unobtainable Luminous High CRI emitters.
  12. Lithium466

    NovaTac EDC T and E Models CRACKED! Back Door/Easter egg found!

    Glad to hear you have it set up as you like ! Like I told you earlier, you just need 18650 battery tube now^^
  13. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    These Olight are really neat! Whenthe Novatac decides to work as it should on the lowest level, you might be able to see some flickering if you're sensitive to it (I'm not), but when it decides it will flicker, you can't miss it. Even on the other modes, your light meter will be able to tell...
  14. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    Haha, officially it's 3V only (it came with a 2AA battery tube), but it's been discussed that Novatac wasn't actually able to implement real modifications to the circuits (discutable, there's a 2 CR123A Novatac after all!) after Henry left, so the classic should be able to handle a 16340. So I...
  15. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    Actually I just experienced it on my Novatac Classic, if it's set to be used with CR123A and you put a 16340 in it (fully charged), even without performing the battery detect reset, if you try to revert to a CR123A, it will act as if the battery is depleted (normal behavior). As long as there is...
  16. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    Perfectly explained. Note that the light is able to sense (even if it's not officially in the manual) that you are switching from a CR123A primary to a 16340 - not the contrary (you'll need a battery reset). Bonus is you can open the battery compartment with a half discharged 16340 without after...
  17. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    I have a classic and enjoy it, not it's like a Chinese-made 120P^^
  18. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    Maybe one day.... Just kidding, enjoy it as it is ;)
  19. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    I don't think Henry will fix any Novatac - he provides some info on them on his website, but I think that's all...technically he has nothing to do with Novatac. I could be good to try to do a factory reset (removing batteries for 2 min before trying), if not, since Bigburly is able to enter...
  20. Lithium466

    I have an HDS EDC Basic 60. What do I do with it?

    I know I'm a pest with option 4, but when you are in the menu, first activate option 4 to disable the force on preset. Then go back to the menu, and you should be able to activate option 9. I believe this is due to the momentary nature of the tactical programming. It's not very clear in the...

Latest posts

Top