Search results

  1. badtziscool

    Triple v5.1 Engine - 4 Mode Pages, 8 Modes Per Page, Double Click, Faster Pins

    I think he means the Osram LEDs. White1 = W1 = OSRAM KW CSLNM1.TG White2 = W2 = OSRAM KW CSLPM1.TG Two types of LEDs. They are domeless (flat) like xpl-hi. They're all the rage with regards to throw due to the really small die size. Kind of like the XP-E LEDs.
  2. badtziscool

    Triple v5.1 Engine - 4 Mode Pages, 8 Modes Per Page, Double Click, Faster Pins

    Looking forward to your upgrade service. I have a couple of BOSS lights ready and waiting.
  3. badtziscool

    Triple v5.1 Engine - 4 Mode Pages, 8 Modes Per Page, Double Click, Faster Pins

    Is the upgrade from 5 to 5.1 a swap of the light engine or is it a firmware update to the existing engine?
  4. badtziscool

    v5 Triple BOSS Flashlight (Bright Output Small Size)

    Most likely that's from the LVP. 30w is a lot of power to draw from the cells. Assuming the cells are at 3.7v resting (which means 7.4v since you have two in series), 30w of power will require 4 amps of current draw. If the cells aren't absolutely in tip top shape (or even just one of them)...
  5. badtziscool

    Ti crenelated bezel

    If you're referring to the oval shaped styling cue machined into the lower segment of the head, then no. It does not come with the bezel you order. That is an integral part of the head and cannot be swapped out. So, if you're looking to convert your Al BOSS to Titanium by swapping parts, then...
  6. badtziscool

    BOSS bounce gone bad - still no word from Oveready!

    Re: BOSS bounce gone bad One thing that happened to me that drove me nuts when I was programming the light was that sometimes when I made a change to the settings and then go to programming, the “code” generated was actually still the previous settings. I had to logout of the site and close out...
  7. badtziscool

    BOSS bounce gone bad - still no word from Oveready!

    Re: BOSS bounce gone bad That’s correct. There must be something that’s reflecting more light into the sensor to make it trip at that level. That’s my thinking at least. Have you ever taken apart the head? If you have, maybe some dust has been introduced into the head?
  8. badtziscool

    BOSS bounce gone bad - still no word from Oveready!

    Re: BOSS bounce gone bad For me middle is always too sensitive. I’m always around 75-85 for almost all situations. edit: I just realized what I said and middle shouldn’t give you this much trouble. Not sure why it’s acting up for you.
  9. badtziscool

    BOSS bounce gone bad - still no word from Oveready!

    Re: BOSS bounce gone bad what level did you set the bounce sensitivity at?
  10. badtziscool

    Moddoolar Triple Wasp Cooling Head and Glow System

    Also interested in WASP along with TL50 or 50s and zerorez shorty.
  11. badtziscool

    Body extender for Boss 70?

    Interesting. I did not know that. Makes the engine even more versatile.
  12. badtziscool

    Body extender for Boss 70?

    Isn't 3xcr123 outside of operating voltage for the 371d LE used in the BOSS?
  13. badtziscool

    Let us speak of moonlight modes

    Very nice mod there. I don’t even know how one has steady enough hands to place and solder an led that small. Although I personally wouldn’t use YG, if there’s a specific use case where YG is superior, I’m sure people will want it.
  14. badtziscool

    Where is the light sensor on the NXS R1 driver board?

    Just to make sure, this is a V5 module, correct? The one with a secondary led? I believe the way the v5 board works is that it uses the secondary led to provide a voltage feedback when there is a change in the ambient light. Hence why the programming screen needs to be bright enough to...
  15. badtziscool

    v5 Triple BOSS Flashlight (Bright Output Small Size)

    I like that patina a lot! Very nice work Eric242.
  16. badtziscool

    v5 Triple BOSS Flashlight (Bright Output Small Size)

    honestly in a shtf setting you should really only have one MAYBE two modes. You wouldn’t be programming your light in that scenario. Doesn’t matter what driver or LE yiure using.
  17. badtziscool

    v5 Triple BOSS Flashlight (Bright Output Small Size)

    Copper is the second best thermal conductor so I think regardless of which BOSS material it's incorporated in (except for the copper version, obviously) it will be a benefit. I think there are already hints of this being incorporated into future BOSS lights. Torchlab's instagram has a pic of a...
  18. badtziscool

    v5 Triple BOSS Flashlight (Bright Output Small Size)

    Just curious. Does anyone have pics of a black 70 boss with a silver clip and bezel? Just curious to see what that would look like. I’ve seen plenty pics of black boss with AlTiN clip and bezel.
  19. badtziscool

    Custom Triple Copper Surefire E1e & E2e (XPL/XGP2/219)

    I saw in the Insider supplemental that the imr 16340 now come rated with 8A max current. Anybody have any experience with these cells? If they are capable of that current (or even just close to it) then that opens up a whole world of options to run e copper heads at max. Albeit for a very short...
  20. badtziscool

    Show your Oveready Collection!

    Leef 18650 e-head c-tail body. Pretty rare to find one. I'd like to have one myself.

Latest posts

Top