Search results

  1. Katherine Alicia

    3.6v 1A bulbs?

    I`v got D cell maglites in 2,3,4,5 and 6. Every now and again I like to treat them to something new/better and this month was my 3D :D I have one of those magnumstar bulbs for 3 cell on the way also since I`v not had much luck getting anything else.
  2. Katherine Alicia

    3.6v 1A bulbs?

    yeah, all my NiMH batts tend to settle at 1.3v each if left to stand for a while, so well in range for the 1.25 NiCad compatibles. So 3.9 into 4v isn`t going to make much difference really, perhaps lower the color temp a fraction.
  3. Katherine Alicia

    3.6v 1A bulbs?

    I have a halogen in my 2D also, but I use 8A LSD batts so it`s not so bad, I`m with you on the brightness, I kinda expected a bit more out of it too, though I do have some Xenon bulbs on order for it that I`d never seen before called Fish eye lens, and it says: Bulb type - 2 cell - Average...
  4. Katherine Alicia

    3.6v 1A bulbs?

    4v and halogen`s good! I have a 5v halogen in my 4D maglite that works quite well. @Snakebite yeah, I`m a little bit the same too, I`m tired of the Spam attacks you get (usually ending in .XYZ) when giving some places your email addy.
  5. Katherine Alicia

    3.6v 1A bulbs?

    These bulbs would be great and $12.30 for 10 isn`t bad, But : EMS Rates US$29.90 US$12.30+US$29.90=US$42.20 Fedex Rates US$32.90 US$12.30+US$32.90=US$45.20 The postage is ridiculous!
  6. Katherine Alicia

    3.6v 1A bulbs?

    I can`t find any UK places doing those?
  7. Katherine Alicia

    3.6v 1A bulbs?

    I just had a look there and the highest they go is 0.75A unfortunately.
  8. Katherine Alicia

    3.6v 1A bulbs?

    Does anyone know where in UK I can buy 3.6v 1A PR bulbs from? I know they exist but I`m not paying a fiver for one, it`s to go in a 3 Cell Maglite. Thanks :thumbsup:
  9. Katherine Alicia

    How long for the Incan?

    LF and KD both sell P60s, but it`s not a regular find here in the UK at least, I`m not sure about other places though? Nice find! I managed to score a box of 100 Soviet MN-6.3-0.3 (6V MES bulbs) from Russia today, works out to about 18p a bulb (the postage is quite expensive), they`ll be...
  10. Katherine Alicia

    How long for the Incan?

    I just bought another couple of dozen assorted MES bulbs, and whilst looking through bulbs in general it`s getting harder to find a bulb type that doesn`t have a LED equiv. Many of the MES bulbs are also NOS too, so I`m wondering how long it`ll be before typical E10 MES and PR bulbs (even p60)...
  11. Katherine Alicia

    16650 + P60 lamp assembly = ?

    I don`t find it anywhere near "dim" and the color temp`s roughly 3000k, it certainly Doesn`t "suck"! Ceiling bounce in a 13x13 room will provide more than a enough light to be able to read anywhere in the room.
  12. Katherine Alicia

    16650 + P60 lamp assembly = ?

    I run an 18650 with a 6v P60 incan dropin without a problem at all, I also have 21700 version too that uses the same P60 module, a 16650 will be just fine. though you can buy 3.7v P60 incan dropins as well ;)
  13. Katherine Alicia

    my `Big P60` thing?

    Well I`v not seen a LED version for it, in fact I was lucky to get the incans for it because it`s pretty much obsolete now. Fortunately I have no shortage of LED lights if I needed more (I do have an LED P60 as well), but I prefer Incan for most indoor things.
  14. Katherine Alicia

    my `Big P60` thing?

    @simonsays The bulbs have arrived, let me know what measurements you need me to take and I`ll do my best ;)
  15. Katherine Alicia

    my `Big P60` thing?

    Not a problem, I`ll be happy to measure what you need, though if the Brass threaded part with the rubber seal screws into the reflector just fine then these HO-R5 bulbs should work perfectly, but I`ll know more for sure when they arrive. :)
  16. Katherine Alicia

    my `Big P60` thing?

    That`s a tricky one, there`s not much info on the 600, and what there is is often conflicting, some say the WF500 bulb will work some say not. Is it just the bulb missing or is it the entire reflector assembly? if it`s just the bulb then unscrewing the bulb out a P60 module and seeing if that...
  17. Katherine Alicia

    my `Big P60` thing?

    Yeah, it`s pretty close (it`s actually better than the original) so I`v got 2 of them on the way now. Needless t say at that price I wont be using it as a Regular everyday light! LOL
  18. Katherine Alicia

    my `Big P60` thing?

    yeah, searching was the first thing I did and just like your link, most places are out of stock/discontinued or LED only Or you have to buy the whole light. I just figured someone on here might know a place :)
  19. Katherine Alicia

    my `Big P60` thing?

    no, both of them are stuck in there, quite a few P60 modules will unscrew like that but the bulbs are fixed in (though I hope to be woking on a mod like this later) .
  20. Katherine Alicia

    my `Big P60` thing?

    Do you know if they would have the same brass thread fitting as these? LF can be quite expensive and I wouldn`t want to make a mistake! :)
Top