Search results

fenix-store
  1. D

    Hi Louie, I was hoping to get that extended manual for the Xtar Dragon VP4 from you. I haven't...

    Hi Louie, I was hoping to get that extended manual for the Xtar Dragon VP4 from you. I haven't used mine for a while and I'm having a bit of time figuring it out.
  2. D

    Let's end daylight saving time

    I'm at work for 06:00. There's no way I'm going to start at 05:00 everyday. I go to bed at midnight so the 06:00 start is early enough.
  3. D

    Beware Alkaline Cells

    Some devices will say in the manual to only use lithium primaries. One is my daughters insulin pump. It uses a single AAA. These pumps are very expensive and ya sort of don't want it failing for health reasons due to a leaking battery so spending a bit more on a battery is not a thought...
  4. D

    LED Lightbar for Truck Rear Bumper

    The lights will only turn on when the truck is put into reverse. There won't be a separate switch to operate it. I'll be wiring it to the reverse wire in the trailer harness so it doesn't have to be a dedicated reverse light. I've replaced leds on a bunch of cheap Chinesium flashlights many...
  5. D

    LED Lightbar for Truck Rear Bumper

    I have a 2019 F150 and would like to add two light bars to the bottom of the rear bumper. It will be wired to only operate while in reverse. I'm thinking of buying a cheap pair of lightbars and then upgrade the led's. So what led die would be the one to get that has a nice colour and decent output?
  6. D

    New Zebralight H600W MKII L2 2014

    I emailed them tonight regarding when the H600w MKII will be in stock and the response was "It will be 'in stock' in two weeks."
  7. D

    Anyone knows what is 4sevens ATOM ?

    New shipping date. Dec. 02 :mecry:
  8. D

    Purpose of a strobe setting?

    In the summer, when I go out in my backyard I don't want to run into any raccoons so I always bring a flashlight with a strobe option. I've found that if I just shine a bright light at them they will not be scared off and in fact will walk towards me but they don't seem to like the strobe option...
  9. D

    Quark Turbo XP-E R2 Mod

    Sorry to keep an old thread going :) but I was wondering if anyone knew the size of the driver for a Turbo S2? I bought one yesterday with the intention of replacing the led with a XP-G2 R5 3C as well as the driver.
  10. D

    plywood flashlights

    That group photo looks nice. I really want to make one.
  11. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    For me longer is better but I'm using the Preon 2. I don't have a P1 body.
  12. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    I've put in for two.
  13. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    This sums up what I would like to see in the clip as well.
  14. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    No hijack at all archer since this thread is all about a better designed clip for the Preon. I use my Preon 2 at work pretty much every day and I've found the clip that comes with the Preon is prone to bending fairly easily. I try to be careful but I've bent it a few times. I'm on my second clip...
  15. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    Looks like we're almost there. Maybe a couple more people?
  16. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    The ability to ream it out isn't the problem. The problem is the amount of material left over on the clip is only .043". That's less than 1/16".
  17. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    From what I've read it doesn't fit. TheTomas measured the Preon at .429" so the Dark Sucks clip would have to be bored out and would leave only .043". http://edcforums.com/threads/preon-2-clip-replacement.88209/
  18. D

    Darksucks willing to make a Ti Preon clip! Need 50+ people to make it happen!

    I'm in for 2. The Preon II is my go to light at work almost every day but have almost lost the light a few times due to the stock clip bending a bit and then the lights just slips out.
  19. D

    plywood flashlights

    Nice job on those lights. It's a nice break from the machined aluminum and Ti hosts.
  20. D

    Need Help Calming My Nerves About Li-Ion

    Like you've already said, checking voltage is the ideal way to go. After a while of checking the same two or more batteries you'll get a feel on how far they are deleted and whether or not they have a large voltage gap between the two. Different batteries behave a bit differently even if they're...

Latest posts

Top