Search results

fenix-store
  1. Robin24k

    SureFire E2L AA Outdoorsman Review

    There's pressure inside the body of the light, probably from a battery venting. I would definitely throw out the batteries ASAP to prevent damage or further pressure buildup.
  2. Robin24k

    SureFire R1 Lawman

    SureFire is still making R1 batteries, the item number is 24132 or R1BATTERY-R. It is now 3450mAh, up from 2900mAh, but you can only order it from customer service.
  3. Robin24k

    The SureFire P2X-B "Fury" 500lu flashlight thread

    Re: Glass not all its cracked up to be in the Fury... Not without modification.
  4. Robin24k

    SureFire EB2 Backup - Review, photos, beamshots and discussion

    Has Jim been around lately? I think he has both and would be able to give you a definitive answer. I'm sure you could find something to do with an EB2C. ;)
  5. Robin24k

    SureFire EB2 Backup - Review, photos, beamshots and discussion

    Why not just get an EB2T body? The EB2C body will probably work, but the EB2T body will work for sure.
  6. Robin24k

    SureFire EB2 Backup - Review, photos, beamshots and discussion

    Sorry, I wasn't paying attention and thought this was the EB1 thread. The EB2T head does not work in dual-output with a clicky switch, though I don't know if the reverse is true as I don't have a EB2C.
  7. Robin24k

    SureFire EB2 Backup - Review, photos, beamshots and discussion

    On the original model, both the head and body are identical.
  8. Robin24k

    *New* Surefire Sidekick 300 lumen Keychain Light

    Good catch, my fingers are a bit cold. :) Fixed now.
  9. Robin24k

    *New* Surefire Sidekick 300 lumen Keychain Light

    You need to look at watt-hours for the comparison to be even slightly meaningful (and even then, discharge characteristics and circuitry differences still haven't been accounted for). AAA Eneloop: 1.2V 800mAh = 0.96Wh AA Eneloop: 1.2V 2000mAh = 2.4Wh CR123: 3.0V 1500mAh = 4.5Wh If the Sidekick...
  10. Robin24k

    TITAN PLUS

    Another thing to keep in mind is the spacing between output levels - medium mode on the Titan Plus offers a better tradeoff between output and runtime. On the Titan-A, high mode has short runtime and low mode is not very bright.
  11. Robin24k

    New Maglite 3rd Generation 2D/3D - 524 + 625 lumens stock!

    They were 2 x AA Eneloop HR3-UTGA in each D-cell adapter.
  12. Robin24k

    New Maglite 3rd Generation 2D/3D - 524 + 625 lumens stock!

    I got one for review about half a year ago. http://www.led-resource.com/2015/04/maglite-ml300lx-review/
  13. Robin24k

    Streamlight Stinger Battery Choices

    The standard/steady charger outputs 180mA, which would be less than 0.1C. Slow charge is not necessarily a good thing for lithium-ion, unlike NiCd/NiMH, and can cause more wear.
  14. Robin24k

    Streamlight Stinger Battery Choices

    Yes, the circuitry is inside the lithium-ion battery pack. A fast charger is preferable though.
  15. Robin24k

    Streamlight Stinger Battery Choices

    Unless weight is a concern, the lithium-ion doesn't offer any capacity advantage over NiMH and has a lower cycle count. I would recommend OEM NiMH as they don't degrade over time like lithium-ion.
  16. Robin24k

    TITAN PLUS

    My thought is that the delay might be intentional, as the 75 lumen output mode is probably more frequently used.
  17. Robin24k

    TITAN PLUS

    Runtime test on low is complete. Here are all the graphs:
  18. Robin24k

    TITAN PLUS

    I guess the Eneloop graph is confusing, as it's the only one with multiple modes on the same graph (purpose is to compare Eneloop with Eneloop Pro). There is one graph for each mode (low is still in progress).
  19. Robin24k

    TITAN PLUS

    I guess you have even newer ones, which has a 20-year shelf life? Just finished the test, here's the updated chart:
  20. Robin24k

    TITAN PLUS

    I just ran it a third time with the same result. What's the expiration on your L92? Mine are 03-2026, which is the latest one that says "9x longer lasting". EDIT: Actually, not quite...I thought it was going to shut off like the previous runs, but it just picked up to ~8% output. Did yours...

Latest posts

Top