Search results

fenix-store
  1. U

    Zebralight SC600-III (XHP35, 1x18650) Review: RUNTIMES, BEAMSHOTS, VIDEO and more!

    I got a very close number with yours(~17000cd): http://www.candlepowerforums.com/vb/showthread.php?399047-Zebralight-plans-MKIII-s-and-SC63-release-for-this-year&p=4854974&viewfull=1#post4854974 So maybe this number is close enough to the correct reading? Thanks so much selfbuilt, you always...
  2. U

    Zebralight SC600w Mk III HI - Pocket Thrower

    Please refer to my post here: http://www.candlepowerforums.com/vb/showthread.php?399047-Zebralight-plans-MKIII-s-and-SC63-release-for-this-year&p=4854974&viewfull=1#post4854974 From my measurement, SC600w mk III HI is about 17000cd, so your estimation might be very close. :)
  3. U

    Zebralight plans MKIII's and SC63 release for this year

    Got my SC600w Mk III HI，I do a simple measurement for a quick reference to all you guys about how it can throw: Measurement distance about 2m with ambient light at 69lux, the equipment used as follows: http://www.tenmars.com/webls-en-us/TM-720.html Reference: Olight SR52UT Hi:47000LUX...
  4. U

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer I got a "bricked" MC3000 after use the V1.03 update software. I pressed the enter button with different duration between 25~60sec., but my Windows 7(x64) still couldn't recognize it. Is there any good idea for me to get my MC3000 back to...
  5. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    10/3 Update: Got 4 AA NiMH speical design for Mini 4WD racing，although the capacity is small (1600mAh)， but the 1kHz impedance is really quite low (only 4.8mΩ) !! Even lower than Li-ion batteries. 30A discahrge curve by the supplier in post #84: http://tcfans.org/bbs/dispbbs.asp?pa...2250&boardid=9
  6. U

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Checked with the official dealer today (in Taobao), they said at least we need to wait until end of October.......
  7. U

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding?

    Sorry for not post the reply from ArmyTek as soon as possible, the reply is as follows, they say it's normal: Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on. If the flashlight was turned on in one of the Special modes it will...
  8. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    I also has Powerfocus BC3100 v2.2 (looks like the same as Opus 3100), but I haven't use it to measure internal resistance yet. Maybe I'll try it next time and give you some numbers for comparison. :rolleyes:
  9. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    Really thanks for your information !! I checked the link you provided, it seems that impedance doesn't do well for the normal 'DC' use.....:( But from HKJ's information: http://budgetlightforum.com/node/20997 Maybe I can use the value to track the batteries' state of health ? Thanks again !! :)
  10. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    Actually I already mentioned the equip. & method in the 1st post, I also update the test lead I used. Equip. name : "ZY05L" Test lead : GW Instek GTL-108A Method : Kevin clip 4-wires AC sensing Please check the link for the detailed information in the 1st post. :D
  11. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    That's a really good point !! I'll try to find all the datasheet and update in the 1st post. :thumbsup:
  12. U

    Internal Impedance Measurement Sharing - Lots of Batteries

    Hi All, I already share the following data in a Taiwanese forum, so there is watermark on the pictures~ :) http://www.wii.tw/~fogerdis/viewthread.php?tid=48943&page=1#pid253384 Not using a very professional equipment, the impedance meter is named "ZY05L" ...
  13. U

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding?

    I also didn't think that there is anything weird in my operation sequence, but the results just go wrong. Still waiting for ArmyTek's reply though.......
  14. U

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding?

    Hi reppans, thanks for you information !! If it's really normal, maybe Armytek should just put it on the manual. I am waiting for Armytek's offical reply now, if there is any update, I will put the information back on this thread.
  15. U

    Tiara / Tiara Pro. Multi-flashlights

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding? Hi Armytek, first of all, I must said that the shipping efficiency is really outstanding. (by FedEX) I re-post this contents from Headlamps thread: Just got my first two flashlight from Armytek but feel quite frustrated. The magnet came...
  16. U

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding?

    Thanks for you reply!! I'll copy the content to that thread.
  17. U

    Armytek Tiara C1 Pro v2's UI Bug or my misunderstanding?

    Just got my first two flashlight from Armytek but feel quite frustrated. The magnet came with the Armytek C1 Pro (maybe called V1?) with 90CRI already has peeling surface, I think it will get rust quite soon and also gave the flashlight a scratch on it. Maybe this one is just because my bad...
  18. U

    Thrunite Neutron Series (XM-L) 1C, 2C, 1A, 2A Review: RUNTIMES, BEAMSHOTS and more!

    There is another easy way to fixed the "puff" of the tailcap to an acceptable level. First, you have to disassemble the tailswitch, and pick up the larger one of the four spare o-rings(I think they are in two size) included in the box. Second, put the o-ring around the rubber tailcap, which...
  19. U

    Exolion Ti CR2 Flashlight - Interest List

    WOW !! You have the crazy Ti series !!! :rock: :rock: Maybe you can also show us the beam shots side by side. :popcorn:
  20. U

    Exolion Ti CR2 Flashlight - Interest List

    WOW !! You must be the first one who got it !! Photos and review please !!! :rock:

Latest posts

Top