Search results

  1. S

    Where to find Solarforce L2 Grey?

    I might be Ok with an L2p, but I had some questions. What is an L2T? Is there a post somewhere comparing all the L2's from Solarforce? It's been years since I've looked at them and all they had was L2 and L2P had just come out. Is the only difference between the L2P and L2 the finish? Is the...
  2. S

    Where to find Solarforce L2 Grey?

    Thanks for that. What is an L2T? Is there a post somewhere comparing all the L2's from Solarforce? It's been years since I've looked at them and all they had was L2 and L2P had just come out.
  3. S

    Where to find Solarforce L2 Grey?

    So there's a new L2 and an old L2? Also, an old L2P and a new L2P? Good God I'm confused.
  4. S

    Where to find Solarforce L2 Grey?

    What's different besides the finish on the L2P vs the old school L2? Is everything else the same?
  5. S

    Where to find Solarforce L2 Grey?

    I think there was something about the L2P that I didn't like. Different clicky/tailcap or it couldn't use the SS low profile bezels or something similar. Plus my OCD likes all the same flashlights. I do have 1 black one but it's in my toolbox in the garage. The other 4 are grey with SS low...
  6. S

    Where to find Solarforce L2 Grey?

    Damn, I was afraid of that. How are the newer style L2 bodies? There are several sellers on ebay that have the old L2 but in black for $13 shipped. Might just go that route if I can't find a grey one and I don't like the newer ones.
  7. S

    Where to find Solarforce L2 Grey?

    Does anyone know where to find a Solarforce L2 but in grey? All I can find on eBay and all the usual spots are black ones.
  8. S

    vinhnguyen54 D26/P60 XPE-R4 & XP-G2 Drop In

    My head is spinning with all the variables here, I've been out of the game for over a year now. What is the difference between all your available emitters? When you say Lowlow, about how many lumens is that approx? It'll be a nightstand light and I use it a lot at night and my current 5L...
  9. S

    P60 sized led drop-ins (part 3)

    I started a thread about a dropin, any recommendations? http://www.candlepowerforums.com/vb/showthread.php?347632-Drop-In-for-1x18650-Recommendation-Please
  10. S

    Drop-In for 1x18650 Recommendation Please

    Hi guys. I've been away from the site for over a year and would like help getting back up to speed. I have several SolarForce bodies that I'd like some drop-ins for. I currently have two Trunite XP-G dropins. The ones with 3 modes and a low of around 5-10L. Does anything like this exist today or...
  11. S

    Show your Solarforce

    How's the anti-roll on that Ronac's Bezel? I'm looking for something that is resistant to rolling like the stock bezel or better.
  12. S

    P60 Dropin with LOW low mode?

    I haven't researched P60 dropins in 6+ months so I was curious if there were any new offerings. I currently have a 1.5A Thrunite XP-G 3-mode 2.7-4.2v and would like a lower low mode. I'm looking for the following: 1) 1x18650 power source 2) LOW low mode, less than 5L 3) Multiple modes 4)...
  13. S

    Show your Solarforce

    I use 22mm GITD o-rings on my L2 lights, all 5 of them :D A 21mm or maybe 20mm o-ring might be stretched a bit more which would prevent it from moving around as mine sometimes does.
  14. S

    Would you be interested in a Solarforce flat bezel for L2 serie ?

    +1. All my 5 lights have this bezel.
  15. S

    Show your Solarforce

    All my 5 L2's are 2-part glued setups.
  16. S

    P60 sized led drop-ins (part 3)

    Re: heat issues? ^^ But did output noticeably decrease as a result of the heat in your test? ;)
  17. S

    Do you really use 0.2 lumen?

    Unfortunately it's not 3 mode :(
  18. S

    Show your Solarforce

    I'd rather have two of them than one of them, plus the regular anodizing is decent on mine. If the light gets used it's going to show some wear.
Top