Search results

  1. Bob_G

    Sold/Expired Withdrawn

    Re: Regulated Mag85 in FM Spiral 2.3D HAIII bored body This is my #1 host for the 5761. I did surgery on a 2S3P 17670 holder to shorten it and use it in this host (which has been ano'd by Brian.) So there is some versatility there.
  2. Bob_G

    Sold/Expired Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2

    Re: Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2 I'm just talking about swapping reflectors. Ideally what I'd want is another LS in the smaller ream.
  3. Bob_G

    Sold/Expired Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2

    Re: Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2 Got the rest of my order a few days ago. Haven't had the time to play with them much, but a few observations. A bit of a fitment problem on a few - loose reflector - but a bit of tape at the base of the...
  4. Bob_G

    Sold/Expired Mag D Incan Driver - Soft Start & Multi-Brightness

    This driver isn't regulated in the sense that you can set a specific voltage (like you could with the hotdriver) but it is in the sense that it has two lower levels that are a percentage of the maximum. So you still need to match your power supply to your bulb. There's a truly regulated version...
  5. Bob_G

    Sold/Expired Mag D Incan Driver - Soft Start & Multi-Brightness

    Got mine a few days ago and tried it out tonight. Using it with 64610 bulb on 12S Eneloop. Using the medium posts for the Osram I found the hex screw a little awkward to get to with the wires pushed down in there but it works. Functionally just as advertised. I never thought a low beam on an...
  6. Bob_G

    Sold/Expired Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2

    Re: Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2 I got my partial shipment yesterday. Three heads, one reflector. The reflector was for the 5761 and it works beautifully.
  7. Bob_G

    Sold/Expired Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2

    Re: Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] part 2 Woo-Hoo! Partially shipped! Thanks for sticking with this David, the frustration must be overwhelming. I bet you can't wait to do a second run huh? Got it all planned out and everything :D
  8. Bob_G

    Sold/Expired V2 Mag C Incan Driver - Soft Start & Multi-Brightness ( available )

    Hi AW, Dumb question on the D driver. If I had, say, a V-bat of 15V and V-bulb of 6V, where does the excess V go? Does it wait patiently to be used, or does it go away as heat. Put it another way, would a V-bulb of 6V have a much longer runtime with a V-bat of 15V than say 8V?
  9. Bob_G

    Sold/Expired FS ... 27LT Slim Bezels - SOLD - thank you CPF

    Got it today Colin, it's just what I hoped. Thanks :)
  10. Bob_G

    Sold/Expired ~ 18650 Aleph & Surefire E-series Compatible Body SALES THREAD ~

    Got mine today. Works fine. Excellent attention to detail. I know looks don't really matter, but this thing looks spectacular with an A19 head, oh my.
  11. Bob_G

    Sold/Expired FS ... 27LT Slim Bezels - SOLD - thank you CPF

    Re: FS ... 27LT Slim Bezels :paypal: Thanks :)
  12. Bob_G

    Sold/Expired ~ 18650 Aleph & Surefire E-series Compatible Body SALES THREAD ~

    Re: ~ 18650 Aleph & E-series Compatible Body SALES THREAD ~ Thanks Brian, I knew you would :grin2:
  13. Bob_G

    Sold/Expired FS ... 27LT Slim Bezels - SOLD - thank you CPF

    Re: FS ... 27LT Slim Bezels I'll take B.
  14. Bob_G

    Sold/Expired ~ 18650 Aleph & Surefire E-series Compatible Body SALES THREAD ~

    Re: ~ 18650 Aleph & E-series Compatible Body SALES THREAD ~ Hey, I'm a son, so do I get a $7.50 refund?
  15. Bob_G

    Sold/Expired ~ 18650 Aleph & Surefire E-series Compatible Body SALES THREAD ~

    Re: ~ 18650 Aleph & E-series Compatible Body SALES THREAD ~ 1xNatural NON-collared 18650 body to USA please. Thanks :)
  16. Bob_G

    Sold/Expired Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED]

    Re: Custom 3" Maglite Head - 3" Carley Mod - Crenellated Bezel -HAIII [CLOSED] Thanks for hanging in there Greg. If this was any other company but Carley, I'd be worried right now, but as it is, I figure we're right on schedule :D
  17. Bob_G

    Sold/Expired 18650 Aleph & E-series compatible bodies (New Development Please Read Post #198)

    Re: 18650 Aleph & E-series compatible bodies (New renderings for your consideration) Will there be any custom knurling options, in terms of where it is, or is it one size fits all? I use my thumb/index finger for primary mechanical grip on this size light, so the bit behind the adapter is all...
  18. Bob_G

    Sold/Expired 2D, 3D, 4D Tri-Bore For Sale and MAG Head Finning Available

    Re: 2D-3DTri-Bore For Sale Jesus is a man of few words :grin2: He is Carlos' (cnjl3) brother-in-law, and is a machinist. He can do tri-bores on 4D IIRC. Jesus - They require that prices be posted on sales threads - you can edit your post by using the 'edit" button at the bottom of your post :)
  19. Bob_G

    Sold/Expired Quick Sale! 2 Aleph-ES Can /w Seoul P4 or Cree P4 + Flupic V2.2 - $SOLD

    Re: Quick Sale! 2 Aleph-ES Can /w Seoul P4 or Cree P4 + Flupic V2.2 - $90 Got it, thanks :)
Top