Search results

Wurkkos
  1. mhanlen

    Love Olight magnetic charging. Anyone else doing this with their torches?

    It does not short it. At least in beer. 12 minutes 12 seconds in.
  2. mhanlen

    Predator Pro v2.5 vs v3

    Have you tried bridging the tailcap with a copper wire and seeing if it's the tailcap? You're taking it out of the equation then. I had a bad tailcap causing it on my Predator 2.5, and they sent me a new one. It's been fine ever since, and flicker free.
  3. mhanlen

    Zebralight SC5c Mk II Flashlight Review (Runtimes, output test, UI programming demo)

    Yeah man... I want an 18650 version pronto! I'll get one of the floodier ones this time though. Thanks!
  4. mhanlen

    Zebralight SC5c Mk II Flashlight Review (Runtimes, output test, UI programming demo)

    I think I've actually misplaced it. I hope I left it at work. She was using the Thrunite archer. I had to give her something to do, or she would have went after the camera. Good to know! Yeah it took me a while to get it after my first one was slightly defective. Thanks!
  5. mhanlen

    Zebralight SC5c Mk II Flashlight Review (Runtimes, output test, UI programming demo)

    Hey Candle Power Forums. I purchased this light a while back, and got a flaky one on the first try. So after a month of waiting I got a replacement. This is my full review. I test the output of the light, perform runtime tests with a lux meter, compare the light to others, and show you how...
  6. mhanlen

    Should I be scared my Acebeam K70 might explode?

    I only have the X45 for comparison- and it's a different design, with no tailcap and no spring in the bottom of the battery tube.
  7. mhanlen

    Should I be scared my Acebeam K70 might explode?

    I'm pretty sure that's what the problem was. I can't say if it fried your light, I'd put in a second set of batteries and monitor it very closely. I would definitely not use the tailcap as the entry of the battery carrier any more. I never had cells heat up or short, I just had a hard time...
  8. mhanlen

    Should I be scared my Acebeam K70 might explode?

    The Acebeam K70 has a dual spring setup in the battery tube an outerspring for the negative and an inner spring for the positive. I own many lights and I never have seen this... but to me the first thing I'd think is lithium ion batteries have shorted against one another. Make sure those...
  9. mhanlen

    Olight H2R Nova Video Review

    Thanks dude! Right, back at ya!
  10. mhanlen

    Olight H2R Nova Video Review

    Yay!!!!
  11. mhanlen

    Olight H2R Nova Video Review

    Hey Candle Power Forums. Going Gear recently sent me both of the new H2R Nova headlamps to do a review comparison of. Inside the review, you’ll see many actual night use shots and a beamshot comparison section with other headlamps from Spark, Olight, and Armytek. There’s also runtime tests...
  12. mhanlen

    Acebeam X45

    Thanks... just decided to add my two cents. Moral of the story- do not trust tints or output levels on video from a camera that is using auto exposure and white balance settings.
  13. mhanlen

    Acebeam X45

    Honestly I don't see all the hate with the tints I feel like mine is perfectly acceptable. It is not the most perfect tint ever... but the horror movie greens and purples people are describing to me are waaay over the top. My video is a fairly accurate representation of how it looks outdoors...
  14. mhanlen

    Acebeam X45

    Can you provide links to those videos with green and purple tints? I'd like to see them.
  15. mhanlen

    It's here the Zebralight SC5C MK II H CRI

    Yeah... I love the footprint of it. But yeah... maybe my unit is bum. I'd be curious to know if anyone else has issues as they roll in.
  16. mhanlen

    It's here the Zebralight SC5C MK II H CRI

    So you didn't see any PWM on 2.8 lumen L1 either? Good to hear that I just may have a bum unit. I sent them an email- so we'll see what happens. According to their website- it's current controlled, so I shouldn't be seeing PWM.
  17. mhanlen

    It's here the Zebralight SC5C MK II H CRI

    Just got mine today. Put in a freshly charged eneloop... I like the tint fine... however on L2... I programmed it to the lowest possible mode and it flickers. Also L1 default has pretty low frequency PWM. There is a distinct difference between the flickering and PWM. The PWM should be...
  18. mhanlen

    Acebeam X45 Flashlight Review (4x XHP70, 4x 18650, 16,500 lumens)

    Oh yeah, she loves em! Nice... sounds like a killer light!
  19. mhanlen

    Acebeam X45 Flashlight Review (4x XHP70, 4x 18650, 16,500 lumens)

    Nice! Is that a vinh light? It's my little lass! When daddy is watching her, I guess I put on clothes that I would wear. Ugg.. pink is ugly (my thought process)!
  20. mhanlen

    Acebeam X45 Flashlight Review (4x XHP70, 4x 18650, 16,500 lumens)

    Acebeam X45 Review Hey guys. My latest review is for the Acebeam X45. It is the brightest light I have ever tested- by almost twice as much. In this review I test the light pretty extensively, including: runtimes, outputs, and more. There’s a thorough demonstration of the User Interface...
Top