Search results

Wurkkos
  1. T

    Sold/Expired FS:XHP-70<-- Copper P60 modules. 3000+ OTF lumen!

    Very late reply, sorry. I see a problem listed about driver whine and I've got a few that whine and even scream. It's been my experience that you can reduce most on the whine by tightly wrapping the dropin with copper tape. I'm talking barely got it to fit in tight. Using an extra o-ring...
  2. T

    Sold/Expired (OPEN) 20% Christmas Sale All Fivemega Products

    Re: 20% Christmas Sale All Fivemega Products Paypal sent for; 1-1x26650 $urefire C head, #14 black. And 1-Full Copper brushed silver C heads #4. $63.00-20%=$50.40 + $38 +$6.00 shipping +4% = $98.17
  3. T

    Sold/Expired All Sold! Silver Plated, Copper Triple Emitter P60 Shells

    Re: WTS: Silver Plated, Copper Triple Emitter P60 Shells (Coming Soon) Well you got me for two already. Do you think it has enough room in the triple for 16mm 12x71350 slave board stacked under a Qlite double stacked with 7135's. 24-7135's can't be too many? This will be my first triple XP-L.
  4. T

    Sold/Expired CUSTOM QUAD P60 XPG Drop-ins. Up to 1654 Lumen OTF!

    Jesse is alive!!! Got the Septa back today with new XP-G2 S2 bin LED goodness inside. Incredibly bright and working. He wrote that he found a short on the circuit board and built a new one. He says he hopes to be coming back soon with some new designs, but I'll leave that to him to tell.
  5. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    Good to see you still at it.
  6. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    The T10B host, that you built is currently getting daily use. I'm having no issues after adjusting for battery length. Mine is almost always in the 2-18350 mode. Of your three host this one seems the balance of size, mass and reflector diameter needed for the MT-G2 led. On the switch spring...
  7. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    These little lights really shine at 3 amps. I may need to add an M2 to the list.
  8. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    No working lux meter. More practical outside testing to do. I've got lots of lights but only a few get this much play time. Walls, alleys, parking lots and creepy dark building test to follow. All measurements using dual calibrated old man eyeballs.
  9. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    Update to the review. The T10B host has an adjustable battery tube height feature. When I first used the light it was very tight on the 18350's. To adjust tube length you remove the bezel and lens. Turn the head all the way down. Then you can thread up or down the pill using a small pair of...
  10. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    I received my light today, package was in great shape. This light is the T10B 1/2-18650 host and three amp three mode driver. Host is anodized black without any scratches or tooling marks with an 18650 extension. It has an anti-roll cigar ring. The tails diameter and thread pitch is the same...
  11. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    Bad news about your drivers. When I order from China it's like a grab bag of surprises. Only once was the mistake in my favor, with the cost of shipping back I usually just eat their mistake and order again. Only two Chinese companies have never made a mistake with my orders, first is...
  12. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    Still hoping that this MT-G2 trend continues. I just don't get the same fix from those puny XM-L's anymore. Really loving throw through sheer flood concepts.
  13. T

    Sold/Expired CUSTOM QUAD P60 XPG Drop-ins. Up to 1654 Lumen OTF!

    I got to give Jesse credit on the Quad, he built it with XP-G2 5000k I believe. Its the brightest dropin I've ever used. It fit the SolarForce P1D pocket like a glove. Its seem three days and three batteries of use, no flicker always changes modes when button is bumped like it should.
  14. T

    Sold/Expired CUSTOM QUAD P60 XPG Drop-ins. Up to 1654 Lumen OTF!

    I don't know if its the driver or the solder job. After paying $540 you want it to work right and not have to pay some one else to get it going right. As Far as Jesse being too busy, no idea he never answers the phone or his emails.
  15. T

    Sold/Expired CUSTOM QUAD P60 XPG Drop-ins. Up to 1654 Lumen OTF!

    Well, I feel like puking now the Septa lasted almost 10 minutes of total use before 2 leds twinkled then went out. Do I mail it back and hope it's not another 15 month wait or just cut my losses and take a hammer to it? Anyone else have VanIsleDSM items failing.
  16. T

    Sold/Expired CUSTOM QUAD P60 XPG Drop-ins. Up to 1654 Lumen OTF!

    I received my Quad and Septa today, both working well. The quad I had ordered in October 2011 and returned to get all 4 leds to work. The Septa I ordered in Feb of 2012 and returned it in April of 2012 when it showed up crushed. The quad was also returned a second time with the Septa as the...
  17. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    Re: MT-G2 Regulated 2x18350 Lights! (Preorder) E-mail me when its built and how much and I'll pay-pal you that day. When I get to test it, I'll write a review for you if you want? If you need the funds sooner then tell me how much and I'll pay-pal as soon as I get the notice.
  18. T

    Sold/Expired Open! MT-G2 Regulated 2x18350 Lights! (Preorder)

    I'm gone a couple of days and the thread lunges forward. The standard T10 as is looks perfect. I prefer reverse clicky on multi-mode lights. I do want an extension tube for a pair of 18500's. After I get the light I'll check my box of parts for a possible match, I've got 4 different extension.
Top