Search results

  1. Prepped

    The Lounge 2016

    Re: The Lounge A young flashaholic in training. ^
  2. Prepped

    DriverVN3 and DriverVNX3 Development

    +1 to a lower than 1% mode. If my ToolVN had this, it would literally be the best thing since sliced bread.
  3. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Glad I picked one of these up when I did!
  4. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    It does mate. The DriverVN is designed that way. Fast press the tailcap eight times. It will then begin flashing. Each flash equates to 0.1v over 3.0v. For example, if it flashes eight times, it would be at 3.8v. I literally just charged mine up, so it flashed 12 times (4.2v) I may have to...
  5. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Dat trit though. Looking nice, mate. Properly jealous. What size trits did you use, and how did you install them? Cheers.
  6. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Why is this Vinh? The protect the threads on the head?
  7. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    I grew a pair the other day, and submerged mine for peace of mind in the future. It's good to go, not that it wouldn't be, as nothing was done to the Orings or anything that actually contributes to it's water proofness, but I still wanted peace of mind.
  8. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Vinh has been ill lately. Also, try to be patient. Remember, this isn't a retailer you're ordering from. Vinh puts time and effort into his work. You get what you pay for, and it's worth the wait. It took a few weeks to get mine, but it was worth it.
  9. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Nothing fancy at all. Just some patience and pliers to fit the clip to the top of the light. I was careful not to over extend the clips, but I got it on there in the end. I've been rocking it like this for about a week, with no issues. It also kind of tail stands, if you sit it down just right...
  10. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    I was very happy with the runtime on maximum output. When you think about the size of this light, and the cell that is powering it, that's pretty impressive given the output it's putting out. It's a lot of fun to show people, and watch the expression on their face when they see what is producing...
  11. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Perfect little torch for him, mate. Must be hard getting half the lights back in the UK (I grew up in Northampton, but moved to the States when I was 15). Glad he's enjoying it. I'm in love with mine. Absolutely fantastic.
  12. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Had I of looked at his signature, I might of inferred that, haha. Best of luck, hope you get it figured out quickly and get to enjoy your light.
  13. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    From what I've heard about Vinh, he will take good care of you. This was a major factor in my purchasing of this light. I'm extremely happy with mine, just be patient and you will be too! Now I just need to save up some more cash to buy another...It's never ending!
  14. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    It is direct drive on max. I'm not sure what caused it. I wouldn't worry about it too much. The point is that I got around ten minutes before the cell was going to drop below 3v, which is impressive in my opinion. You can't truly appreciate how bright it is, until you buy one :twothumbs...
  15. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Not entirely sure. I'm no electrician or battery expert by any means, and I didn't want to discharge the cell past 3v anyway. Maybe a bad battery? Who knows? Anyway, I'm very pleased with the light, and to answer Vudoo's question, I definitely think it is a viable EDC companion!
  16. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    I did a runtime test tonight on high. I got almost exactly nine minutes on maximum output, stopping each minute to take the voltage. I am running an Efest 350mah 10440 IMR, which was fully charged to 4.20v prior to testing. The light cut out at 9 minutes, presumably because the battery was under...
  17. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    If I get time tonight I'll try to post voltages on high with a runtime test. I have an Efest 10440 IMR.
  18. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    It came! Insanely bright, too!
  19. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    Mine arrives Monday...I can't wait.
  20. Prepped

    TOOLvn- Best IMR10440 Clicky of 2015

    These things are selling like hot cakes...
Top