Soon it's seven years. I still use this light every day, all year, carried in it's belt holster. Never a failure. The only other lights that has been working without problems are my modded Mags and my Liteflux LF1 with updated emitters. All other lights I've had during this time have failed in...
Quote from OP "I'd like to get some landscape lighting later to point from ground upward at the front facade...." On a brick house green CREE XR-? look spectacular. I have used green XR-C for this in simple spots from DIY "make your own led bulb kits". It's very eye catching and adds atmosphere...
Thanks Blasterman, the effect was what I specifically wanted. Have to mount the emitters a bit out from the wall, 3-4 dm at least, to get the effect. The 3 x 3 watt spot fixture mounted on the wall: View from the fixture: A pic of it in operation, it's bright:
Basic ingredients. Cree XR-E ~3000K on a slab of aluminum, 15 x 30 x 3 mm. Cheap optics from DX et al. Epoxied and wired. Generic driver, 350mA to 1-8 emitters. Result. 2 x 1 Watt spots. Generic driver for 1-3 emitters @ 350 mA. Same spots from the kitchen door...
In some European countries there are quite a few commercials for small Chevrolet branded cars made by Daewoo; Chevrolet Aveo, Spark, Cruze and so on. Used to be Daewoo branded here.
Maybe a bit OT. SOPA has two meanings in the Swedish language. At a personal level it's an insult meaning you're a dirt bag. Generally it just means garbage (the kind you throw away). I find this slightly funny...
Hello Jamie91! A simple AMC7135 driver from a number of suppliers on several continents that drive one Cree XM-L emitter. Using three C NiMh cells will work wonderfully in a 2D host. Need to remove the anodising in the tailcap and cut the spring so it fits in the recess. Also something to make...
I got the 64 GB version a few days ago and I find it satisfying with all it's features, even got a developers setting in the soft. Others find it lacking. What's your (owners) opinion? As a sidenote; it measured in at 64.2 GB and it was labelled made in Finland.
I made a gift of my last RQ recently. Before that I installed a failsafe 4x7135 AMC one level driver and supplied the recipient with one Sanyo 18650 cell and the appropriate one cell charger. This is an old thread, but the Spear/RQ were nice and slightly different at the time. Still good...
You just pry the lens out of the Rebel based ones to access the emitter. In mine the 'stars' are screwed down and have thermal grease, but I found no reason to change the reasonably efficient Rebel to anything else. Also the 'stars' have components on them so a reflow would be necessary, two...
The really sad part is that the Swedish government really doesn't care one bit. We are moving into a post-industrial society they say. Manufacturing cars has no place there, so we won't help SAAB. No care for industry, development etc. SAAB is a key player in that part of the country, lots of...
A 'non-lethal' alternative is an expandable baton to complement the spray. I have no idea if it's legal to carry where you live, but if it is it will greatly increse your reach and efficiency. It's very effective and actually works as a deterrant if you can deploy it correctly timed...
The XM-L sits a bit below the rim of the reflector opening in my modded former XR-E lights, eg. MRV or Tiablo A9. I use a spacer made from soft thin rubber to get the right focus and to stop debris entering the reflector.
Re: Flashlight lending catastrophy... No, they were grateful for the help as they had been trapped for a long time. It's just that they could not process the fact that anyone could get the strange notion to carry a flashlight and a multitool on their person. A lot of people I meet only carry a...
Re: Flashlight lending catastrophy... Not a single co-worker or aquaintance has ever asked to loan any of my lights or Victorinox/Leatherman tool etc. Only family or close friends loan my stuff. About the light I get ridiculed and about pocket knives and tools I get challenged that it's...
That's a good compromise to get it working with alkaline cells. Still lots of light. About 3 C NiMH. I decided to limit my XM-L builds with 2D or 3C Mags running om 3 LSD NiMH to 2.1A with that type of driver. It's hard to see a difference in output with your bare eyes and it will give you...
Might be I missed it... But where did you get the lights you used for the mods? How did you fit the 66mm lens in the host? Looks like a good setup and I would like to know more. Interesting!