Search results

fenix-store
  1. S

    Ozark Trail 200 Lumen 4AA Light at Walmart!

    yes....but is it moddable??
  2. S

    surefire rechargeable 123s

    I didn't see a datasheet for these on the k2 website, so I called. I was looking for max current discharge. I thought lfp batteries could handle a higher rate, but apparently these are only rated for continuous use at 1.2A / 2C. Isn't that less than "normal" or maybe I'm off on my thinking....?
  3. S

    single CR123 w/xm-l options - compare

    Exactly - I just need some distinction between the three listed. Do you have any of the models listed?
  4. S

    single CR123 w/xm-l options - compare

    In the original post, I already conceded that xm-l isn't a throwy emitter. (If I needed a thrower, I'd just pull out my overdriven HS-802) I just really needed a comparison between the ones listed. Basically, it's going to come down to reflectors. Which reflector has been designed to throw...
  5. S

    single CR123 w/xm-l options - compare

    I won't always use the primaries. I have some aw rcr's available too, so I'll have them at my disposal to take full advantage of whatever I end up with. I just wanted to assume a more "even" playing field for the lights. I didn't want to have the 200 lumen difference with rcr's help one...
  6. S

    single CR123 w/xm-l options - compare

    And...that is exactly what I don't want.....floodier and non-clickie. Did you read the last sentence? :)
  7. S

    single CR123 w/xm-l options - compare

    Ok, so I'm looking for (as the title suggests) a single 123 light to replace an aging Fenix P2D. I have other lights, including custom builds, but I'm looking for something that's similar to the function of the P2D but brighter on high (not hard to do, I know). Here's the issue: there are...
  8. S

    Shining Beam C-Mini - any news??

    Yup....thats where I saw it: on the SB website. It looks cool. I was just wondering if the reverse clickie idea would work.
  9. S

    Shining Beam C-Mini - any news??

    I was trying to poke around for some info on the C-Mini. I was hoping to hear something good about [email protected]@! Anyone have one and can say a little something?!?! I was also thinking.....if I subbed in a reverse clicky for the forward one it comes with - would I then be able to change modes with...
  10. S

    New JETBeam models, PA10, PA20, PC10, PC20

    Does anyone know how the modes work? Is the (daily/normal mode) sequence configurable? (H/M/L/LL - and you can rearrange them in any order) or Are the modes ramping? I know it says configurable, but I don't know in what way.....it's a deal breaker for me. Nevermind - it's not programmable...
  11. S

    Fenix 8AA battery pack fit in bored out Mag?

    1.390" - THANKS! I'll check tonight and post the TK pack dimensions. I just thought it'd be a useful option if it was at all doable. I didn't want to have to buy another battery pack if I didn't have to.....
  12. S

    Fenix 8AA battery pack fit in bored out Mag?

    ....there might be other carriers, but I have an extra one that's not doing anything right now, and I'd like to put it to some random use. I was thinking it might be a little too wide - that's why I'm checking. I can take a measurement of the diameter with batteries installed and maybe...
  13. S

    Fenix 8AA battery pack fit in bored out Mag?

    Can anyone tell me if a fenix TK AA pack (with batteries) fits in a bored out Mag D body? I know it's a little obscure, but it would be helpful to know! Thanks!
  14. S

    Does anyone do Attiny programming?

    Thanks for the info! Hopefully I can avoid the complications of other SMD's and etc. as I'm going to stick to programming while still mounted on an esisting LED driver (avoiding the need to solder/desolder): you can use an 8pin SOIC clip (3m makes some and other cheapies exist too) to do the...
  15. S

    Does anyone do Attiny programming?

    Thanks. I've been wondering why more people haven't tried to reprogram the Attiny chips (mounted on drivers for lights) to get exactly what they want in a light. I've seen it once or twice, but it's random, and it's not available for others to use. I was thinking how AWESOME it would be to be...
  16. S

    Does anyone do Attiny programming?

    I was just wondering if anyone does, or can do, Atmel chip programming? I was curious.....I was contemplating getting into it (buying the materials, learning coding....etc....but was hoping to get some insight first.) Thanks! GR
  17. S

    Sold/Expired WTB: 1 x Mag heatsink (D) for P7

    I'm looking for just one Mag heatsink for a D cell mag. I would like one to fit a P7. I'm not picky about anodized or not. If you have one to sell, please let me know! Thanks!
    • Sprinkles
    • Thread
    • Replies: 0
    • Forum: Sold/Expired
  18. S

    Best way to mount driver to P60 drop-ins

    I was digging around, and didn't see anything specifying differences on how some of the driver boards are mounted into/onto the drop-in pill. I was curious if there was a simpler way to do it, other than soldering. I do not want to fully pot it though. I would like to have the ability to...
  19. S

    Sold/Expired WTB: UCL (52mm) for MagD

    Looking for a spare UCL. If you'd like to part with one...I'd graciously accept it, and give you some monetary compensation.... Thanks!! Greg
    • Sprinkles
    • Thread
    • Replies: 0
    • Forum: Sold/Expired
  20. S

    What gauge to use?

    I've looked at some charts etc. regarding transmittance/load for wire gauges, but they're inconsistent and don't always specify what TYPE of wire it is. I was poking around a lot of the mag builds hoping to see what people used, but most don't say. Anyway - 2 questions.... What's the...

Latest posts

Top