14670 + fill-in to make 2xAA length

[cernobila]

Where can I get a "fill-in" type dummy to be able to use a 14670 in a 2x AA light? I want to try something.

 

[mdocod]

go over to your kitchen.. grab the aluminum foil out of the .... wherever...

go to the drawer you think you left the electrical tape in... find out it isn't there...

frantically search the entire house looking for the electrical tape...

come to the sad realization you'll probably have to use the duct tape or masking tape...

roll up a wad and put tape around it.. make a little bit stick out of both ends... hehe

 

[Nebula]

Where can I get a "fill-in" type dummy to be able to use a 14670 in a 2x AA light? I want to try something.

Try this link - http://www.candlepowerforums.com/vb/showthread.php?t=148054. Send RMI a note outlining what you need and he will let you know if he can make it. His work is top notch IMHO. Good luck. KK

BTW - remember that the search feature is your friend.

 

[Brighteyez]

How about a machine screw and nut to fill in the space. You need a length of about 30-35mm

Where can I get a "fill-in" type dummy to be able to use a 14670 in a 2x AA light? I want to try something.

 

[Rommul]

Where can I get a "fill-in" type dummy to be able to use a 14670 in a 2x AA light? I want to try something.

Ask and ye shall recieve.

Mine works flawlessly.

Just use some clear tape around the circumference and there should be no shorts.

http://www.candlepowerforums.com/vb/showthread.php?t=137777

Contact highorder