So here's whats been bugging me for a few days. Whats a better light configuration, 1xAA or 2xAA? I get a smaller sleeker looking light with 1xAA but the output and runtime are just not comparable to a 2xAA. This light i plan to keep in the house as a general use light, but wouldn't mind taking with me to say a camping trip.
1xAA or 2xAA?
- Thread starter Cman219
- Start date
Help Support Candle Power Flashlight Forum
sol-leks
Flashlight Enthusiast
- Joined
- Aug 10, 2008
- Messages
- 1,695
One isn't really better than the other, its really about preference and use. The only real benefit to the 1xAA format is the size. If you plan to be keeping this light in your pocket alot, go with the 1xAA, if not go with a 2xAA light.
One option is to get a light that can be configurable as both, for example the quark. Get one quark head and two bodies, and then have your pick.
One option is to get a light that can be configurable as both, for example the quark. Get one quark head and two bodies, and then have your pick.
amigafan2003
Enlightened
- Joined
- Sep 2, 2009
- Messages
- 248
Doesn't work as a month later you end up buying a spare head and switch anyway
So I'd say buy a 1xAA light AND a 2xAA light straight away 
shark_za
Enlightened
Get the 1AA that can use 14500's.
The only reason the 2AA gives extra power is the voltage and this is beaten by the 14500.
So best of both worlds, the only loss is runtime.
Carry spare cells.
The only reason the 2AA gives extra power is the voltage and this is beaten by the 14500.
So best of both worlds, the only loss is runtime.
Carry spare cells.
+1 on the output of a 1xAA light on 14500
berry580
Flashlight Enthusiast
+1
i support 1xAA over 2xAA with action, as could be seen, there's no space for 2xAA formats in my collection.
Cheapskate
Enlightened
Spot on.
If you need more than 1AA/14500 can provide, torches that take an 18650 are the next logical progression, not 2 x AA.
Kestrel
Flashaholic
And another +1 makes it four in a row. :huh:
pobox1475
Enlightened
Or something like a Quark 123x2 running a 17670.
Also if you go with an AA get some Eneloops and a decent charger. Alkalines will leak if left in light and in some cases within a short period of time
...+1
Especially, because for 2 AA lights you need to ensure both cells are even !
If they are not (which is the case most of the time
), output and runtime (and cell-life) will suffer badly !!I really love the possibility to use every single of my AA cells regardless of it's state-of-charge (and point in time of their life-cycle
). And yes, next in line would be 1x 18650.
Last edited:
Hello Folks,
My first post here and I have been enjoying reading this forum over the last week or so. Whatever level novice is, I'm below that so I really do appreciate your input.
I'm drawn to the pocket sized torch flashlights with AA capabilities because of the easy availibility of additional AA batteries. Those who prefer the 14500 and use there flashlight as an EDC, do you carry AA batteries as backups or do you carry additional 14500s? Thanks!
My first post here and I have been enjoying reading this forum over the last week or so. Whatever level novice is, I'm below that so I really do appreciate your input.
I'm drawn to the pocket sized torch flashlights with AA capabilities because of the easy availibility of additional AA batteries. Those who prefer the 14500 and use there flashlight as an EDC, do you carry AA batteries as backups or do you carry additional 14500s? Thanks!
parnass
Flashlight Enthusiast
I would use a 2AA light for general home or hiking/walking because a 2AA light is easier to hold (especially while wearing gloves) and a 1AA light for EDC because the 1AA light is easier to pocket carry.
Warp
Enlightened
I, personally, would never consider a 1xAA light for around the house use. The output, well, leaves a lot to be desired and will be noticeable if and when you use it outdoors. Plus, as mentioned above, that nice small pocket size can be more difficult to hold onto. The only advantage I see to a 1xAA is that it will fit more readily in your pocket. BUT since you don't intend to carry it...why compromise on everything else?
pobox1475
Enlightened
Carry an Eneloop in a Quark Mini. A back-up light always trumps a spare cell. The Mini's are not much bigger then the battery anyway. Since topping-off is possible with Li-Ions after moderate use you will only run out of juice if used for an extensive amount of time. Avoid alkalines.
Thanks for the input everyone. It looks like the majority of you prefer 1xAA because of the 14500 option. The problem is, i'm not really a big fan of the Li-Ion batteries since i have to baby them and buy a reliable charger etc. But yea thats another consideration i had; If i have a 2xAA light, i would need 2 batteries to operate it everytime.
I went with the Quark AAx2 because of the higher output and longer runtimes over the AA version. Granted you can go with a 14500 to get higher output with a single AA model, but that means buying the cells and a charger for them if you don't already have the gear. I already have several Duraloops and a good smart charger so the AAx2 was the obvious choice for me. But of course, opinions vary.
Wiggle
Flashlight Enthusiast
1xAA for me. Fenix L2D is my only (and last for a long time) multi-cell light.
-Better size, more pocketable
-14500 is great
-Easier to find 1AA in a pinch than 2 (esp. if you want them matched at all).
ky70,
I run 14500 in my Quark AA-T R5 and I also carry an additional charged 14500 and one Energizer L91 as well. I carry the L91 because of the good anti-cold characteristics it has.
-Better size, more pocketable
-14500 is great
-Easier to find 1AA in a pinch than 2 (esp. if you want them matched at all).
ky70,
I run 14500 in my Quark AA-T R5 and I also carry an additional charged 14500 and one Energizer L91 as well. I carry the L91 because of the good anti-cold characteristics it has.
Paul_in_Maryland
Flashlight Enthusiast
A longer AA is a joy to hold. As for ease of carry: C'mon: Nothing is taking up space in the upper half of your pocket, anyway. Know what light I carry on my keyring in my front pants pocket? A 3AA FiveMega.
Guys, you should know better than to mention lithium-ions in this thread. If someone is asking about 1AA vs 2AA, it's a safe bet he welcomes the ubiquity of 1.2V, 1.5V, and 1.7V cells.
BTW, I'm switching from 1.2V nickel-metal hydride AA cells to 1.6V nickel-zinc rechargeables. The switch will make my emitter options much more interesting.
Guys, you should know better than to mention lithium-ions in this thread. If someone is asking about 1AA vs 2AA, it's a safe bet he welcomes the ubiquity of 1.2V, 1.5V, and 1.7V cells.
BTW, I'm switching from 1.2V nickel-metal hydride AA cells to 1.6V nickel-zinc rechargeables. The switch will make my emitter options much more interesting.
