2x18350 & 2x18500 FM1794

ebuchner

Well-known member
Joined
May 28, 2017
Messages
54
PAYPAL SENT

#04 BLACK 2X18500 FM1794 *with tail cap* = $59

4x spare 1794 ----------------------------------- = $40

1x spare GID switch seal ------------------------ = $1
1x spare red switch seal ------------------------- = $1
1x spare black switch seal ----------------------- = $1

Shipping to states -------------------------------- = $6

-----------------
Total = $108
 

Fibo

Well-known member
Joined
Jan 10, 2013
Messages
95
Number 5: Gray and 2 times 18500 Li Ions: 59

FM1794 two times: 20

GID Switch seal: 1

int shipping: 12

92 Dollar send in a Minute :)
 

ebuchner

Well-known member
Joined
May 28, 2017
Messages
54
:paypal:

#08
Black 2x18350 FM1794 (AVAILABLE) = $57

3 x GID Switch Boot------------------------------ = $3

4 x Spare FM1794-------------------------------- = $40

Shipping to States------------------------------- = $6

--------------
Total = $106
--------------

I did not relaize how much I would love this bulb/host combo.
 

Fibo

Well-known member
Joined
Jan 10, 2013
Messages
95
I will take the following Items...

Nr 5. Black 2x 18500 FM1794 Light without Tailcap: 34
1x Ex-Cap (35mm): 26
FM1794 bulbs x 7: 70
Int Shipping: 12

:142 Dollar

Thank you :)
 

ma tumba

Well-known member
Joined
Oct 7, 2013
Messages
1,341
Location
Russia
As a free bump, just wanted to say that a mag bi-pin bulbs could be used in these host for much longer runtime. I am using a 5D bulb in a 2x18350 body. If you put a dc fix film on the glass then you can get a great, even incand flood from this setup (would not try this in a 1000lm hot rod though)
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
Ex cap 35mm when installed on 2x18350, can it be used with 2x18500 then? Are tolerances ok?
Yes, when you use 35mm Ex cap, your 2x18350 flashlight will take 2x18500
and if you use 69mm Ex cap, your 2x18350 flashlight will take 2x18650
By the way, installed Mc Clicky switch on Ex cap, will work as tail cap too and you won't need any separate tail cap.
 
Last edited:

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
PP sent for following items:

#03 Grey 2x18350 FM1794 with tailcap (AVAILABLE) 57$
3 x FM1794 $10 each (AVAILABLE) 30$
Extra replacement black switch seal 1$
#01 Gray 51mm Ex/Cap $27(AVAILABLE) 27$
2 x G4 Bi-pin FM (14.4V, 3.A) $12 Each (4 AVAILABLE) 24$
Shipping 12$ + additional 4$ = 16$

TOTAL 155$

EDIT: 51mm excap is incorrect, i need 69mm
 
Last edited:

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
SORTED
PP sent for following items:

#03 Grey 2x18350 FM1794 with tailcap (AVAILABLE) 57$
3 x FM1794 $10 each (AVAILABLE) 30$
Extra replacement black switch seal 1$
#01 Gray 51mm Ex/Cap $27(AVAILABLE) 27$
2 x G4 Bi-pin FM (14.4V, 3.A) $12 Each (4 AVAILABLE) 24$
Shipping 12$ + additional 4$ = 16$

TOTAL 155$

EDIT: 51mm excap is incorrect, i need 69mm

Hi Varooj, any shipping info about this one?
SORTED
 
Last edited:

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
Just tested 2x18350 with Keeppower IMR18350 1200mah and bulb flashed. After reinstalling second, same thing. With third i've used ExCap and 2x18650 protected and now it's ok.
Does anyone else have/had issues with newer gen cells??
 

ma tumba

Well-known member
Joined
Oct 7, 2013
Messages
1,341
Location
Russia
2x18350 & 2x18500 FM1794

Have had no problems running a 1794 off 2x aw imr 18350/18500. Mcclicky, aw switch, miser. Never tried the new imr though
 

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
Re: 2x18350 & 2x18500 FM1794

Have had no problems running a 1794 off 2x aw imr 18350/18500. Mcclicky, aw switch, miser. Never tried the new imr though

Forgot to mention, those 18650 i've installed were old Radilast's, like your setup. I presume new cell will deliver more current than the bulb can chew.
 

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
Re: 2x18350 & 2x18500 FM1794

Forgot to mention, those 18650 i've installed were old Radilast's, like your setup. I presume new cell will deliver more current than the bulb can chew.

Quick update: it looks like it was the bulb issue, after saying famous war cheer "yolo" i've deceided to go again with KP 18350 and nothing happend ( i mean bulb didn't go poof). Still works, even brighter!
This host is amazing!!!
 

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,706
Location
Croatia, EU
Re: 2x18350 & 2x18500 FM1794

I'll take this one without tailcap:
#06 Grey 2x18500 FM1794 34$ (AVAILABLE)
 

Reijer

Active member
Joined
Jan 22, 2009
Messages
31
Location
Netherlands
Re: 2x18350 & 2x18500 FM1794

Hi FM,
About to send PP for;
#04 Grey 2x18350 FM1794 with tailcap (AVAILABLE)

$57 - 20% = $ 45,60

3x FM1794 $10 each (AVAILABLE) = $30
internationalshipping: $12
grand total: $87,60
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
Re: 2x18350 & 2x18500 FM1794

A B

[SIZE=+1]A B[/SIZE]

[SIZE=+2]A B[/SIZE]

[SIZE=+3]A B[/SIZE]
 

cernobila

Well-known member
Joined
Nov 27, 2004
Messages
1,739
Location
Adelaide, Australia
Re: 2x18350 & 2x18500 FM1794

Payment sent for #06 Black 2x18500 FM179 without tail cap $34 + 2x 1794 bulbs $20 + shipping $12 = $66
"cernobila".....thank you.
 
Top