3AA, 6AA, 9AA & 12AA battery holders (CLOSED)
[size=+4]
Hi folks,
These adapters are patent pending and ready to ship.
12AA to 4D adapters to power up to 14.4 volt bulb in 4D stock unbored M*g
9AA to 3D adapters (10.8 volt) to power up an WA1185 or WA1331 in 3D stock unbored M*g
6AA to 2D adapters (7.2 volt) to power up an WA1111 or ROP in 2D stock unbored M*g
3AA to 1D adapters (3.6 volt) to power up to 3.6 volt bulb or LED in shortened 1D unbored M*g
Also possible to use 3x14500 to 1D Li-Ion adapters to power up to 11.1 volt bulb or multiple LED in shortened 1D unbored M*g
Please follow Positive and Negative marks printed as P and N
Aloso allign red marks on upper and lower plastick when loading.
All adapters come with female tail jack connector (installed) and I will include male jack too. [size=+1]Batteries NOT included[/size]
Remember, center pin of charging jack is POSITIVE
It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace.
Remember, charging port is to tail side of M*glite.
Please do not use two of these adapters in same flashlight for higher voltage.
I also have followings with purchase of battery holder only:
WA1185 bi-pin bulb which can be overdriven by 9AAs in 3D M*g and WA1111 which can be overdriven by 6AAs in 2D M*g
12AA to 4D $42 for first adapter. Each additional 12AA to 4D $40
9AA to 3D $39 for first adapter. Each additional 9AA adapter $37
6AA to 2D $37 for first adapter. Each additional 6AA adapter $35
3AA to 1D $36 for first adapter. Each additional 3AA adapter $34
G4 bi-pin SS socket $17 each
G4 bi-pin brass socket $14 each
Cammed or camless SMO Aluminum reflector (any size opening) (NO MORE LEFT)
Cammed MOP Aluminum reflector $25 each (AVAILABLE)
Dummy AA $8 each (With purchase of battery holder only)
Bi-pin WA1160 $6 each (to use with 5AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1111 $9 each (to use with 6AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1164 $9 each (to use with 8AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1185 $6 each (to use with 9AA) (AVAILABLE with purchase of battery holder only)
Pack of ROP (3854) Hi and Low $10 (to use with 6AA) (AVAILABLE with purchase of battery holder only)
FM Axial 7.4 volt, 3.3A $10 (to use with 7AA) (AVAILABLE with purchase of battery holder only)
Boro lens $6.50 each (AVAILABLE)
Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
$6 shipping to States for up to 2 adapters of any kind, then add $0.75 for each additional one.
$8 shipping to international destination for up to 2 adapters of any kind, then add $1 for each additional one. (No tracking available)
No additional shipping for bulbs, sockets and or reflectors if purchased with adapters.
Please make all your purchase at once to save you some shipping.
Please note: I am not manufacture of any bulb and don't sell them for profit. I offer them here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb.
For ducumentation purpose, it is [size=+2]necessary[/size] to post your CPF handle and detail of your order here and paypal note.
Without above information, I will never figure out what the payment is for and from whom.
Paypal to: [size=+1]DO NOT PAY[/size]
Please PM me for other type of payment.
For ducumentation purpose, it is [size=+2]necessary[/size] to post your CPF handle and detail of your order here and paypal note.
Without above information, I will never figure out what the payment is for and from whom.
Example:
for:
9AA to 3D $39
Two WA1185 $12
One dummy AA $8
[size=+4]
CLOSED
[/size]
Hi folks,
These adapters are patent pending and ready to ship.
12AA to 4D adapters to power up to 14.4 volt bulb in 4D stock unbored M*g
9AA to 3D adapters (10.8 volt) to power up an WA1185 or WA1331 in 3D stock unbored M*g
6AA to 2D adapters (7.2 volt) to power up an WA1111 or ROP in 2D stock unbored M*g
3AA to 1D adapters (3.6 volt) to power up to 3.6 volt bulb or LED in shortened 1D unbored M*g
Also possible to use 3x14500 to 1D Li-Ion adapters to power up to 11.1 volt bulb or multiple LED in shortened 1D unbored M*g
Please follow Positive and Negative marks printed as P and N
Aloso allign red marks on upper and lower plastick when loading.
All adapters come with female tail jack connector (installed) and I will include male jack too. [size=+1]Batteries NOT included[/size]
Remember, center pin of charging jack is POSITIVE
It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace.
Remember, charging port is to tail side of M*glite.
Please do not use two of these adapters in same flashlight for higher voltage.
I also have followings with purchase of battery holder only:
WA1185 bi-pin bulb which can be overdriven by 9AAs in 3D M*g and WA1111 which can be overdriven by 6AAs in 2D M*g
12AA to 4D $42 for first adapter. Each additional 12AA to 4D $40
9AA to 3D $39 for first adapter. Each additional 9AA adapter $37
6AA to 2D $37 for first adapter. Each additional 6AA adapter $35
3AA to 1D $36 for first adapter. Each additional 3AA adapter $34
G4 bi-pin SS socket $17 each
G4 bi-pin brass socket $14 each
Cammed or camless SMO Aluminum reflector (any size opening) (NO MORE LEFT)
Cammed MOP Aluminum reflector $25 each (AVAILABLE)
Dummy AA $8 each (With purchase of battery holder only)
Bi-pin WA1160 $6 each (to use with 5AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1111 $9 each (to use with 6AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1164 $9 each (to use with 8AA) (AVAILABLE with purchase of battery holder only)
Bi-pin WA1185 $6 each (to use with 9AA) (AVAILABLE with purchase of battery holder only)
Pack of ROP (3854) Hi and Low $10 (to use with 6AA) (AVAILABLE with purchase of battery holder only)
FM Axial 7.4 volt, 3.3A $10 (to use with 7AA) (AVAILABLE with purchase of battery holder only)
Boro lens $6.50 each (AVAILABLE)
Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
$6 shipping to States for up to 2 adapters of any kind, then add $0.75 for each additional one.
$8 shipping to international destination for up to 2 adapters of any kind, then add $1 for each additional one. (No tracking available)
No additional shipping for bulbs, sockets and or reflectors if purchased with adapters.
Please make all your purchase at once to save you some shipping.
Please note: I am not manufacture of any bulb and don't sell them for profit. I offer them here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb.
For ducumentation purpose, it is [size=+2]necessary[/size] to post your CPF handle and detail of your order here and paypal note.
Without above information, I will never figure out what the payment is for and from whom.
Paypal to: [size=+1]DO NOT PAY[/size]
Please PM me for other type of payment.
For ducumentation purpose, it is [size=+2]necessary[/size] to post your CPF handle and detail of your order here and paypal note.
Without above information, I will never figure out what the payment is for and from whom.
Example:
for:9AA to 3D $39
Two WA1185 $12
One dummy AA $8
Last edited:
