4AA to 1D, 8AA to 2D, 12AA to 3D M*g

Hallis

Well-known member
Joined
Aug 23, 2004
Messages
2,590
Location
Dallas, Tx
I really really wish you'd make another run of these. I need at least one 12aa/3d white and 8aa/2d white.

If anybody has these I'd really like to talk about buying them.
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]
 

Megatrowned

Well-known member
Joined
Jun 11, 2012
Messages
443
Location
Wisconsin
I have a question. Is it possible to have a 4 AA to 1 D adaptor that puts out 3V? (Two sets of AA's in parallel) I have a 2 D M*g I would like to have cut down to 1 D, but I still need 3V.
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
Is it possible to have a 4 AA to 1 D adaptor that puts out 3V?
2S/2P holders are designed for 14670 which are about 67mm long but AA cells are 50mm long
Using 4 standard AA cells with some spacers is possible in 2S/2P holders for 3 volt (nominal) operation. In this case, you will need 4 spacers of 17mm and use inside bored 1.25D.
 

Mr.Brown

New member
Joined
Apr 30, 2016
Messages
3
Hello,

I recently acquired an unused short bodied red Elephant II but it has no battery holder. Are they still available? Your assistance would be greatly appreciated.

Mr. Brown in Orange County, California
 

Minimoog

Well-known member
Joined
Jan 13, 2005
Messages
773
Minimoog - Paypal sent for Black 12AA to 3D (7.2 volt)$38 (AVAILABLE)
+ $14 shipping to international destination
Transaction ID 57N78155NR627604C
 
Last edited:

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
[SIZE=+2]Some more battery holders available.

Please see post #1 for available battery holders.[/SIZE]
 

RandyJMP

Member
Joined
Jan 21, 2018
Messages
9
Hi, wondering if it's possible to just buy a piece of these. I have an old 2D conversion, the bottom plastic piece has broken. I don't mind buying a complete 8xAA set but I notice the white version is not available anymore, and it seems to be the higher voltage version I need. I would've just sent a PM but don't have enough posts to do that. Policies here are quite a bit more restrictive than they used to be (2009-ish was the last time I was on).
ZAA==



Thanks

Randy
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
Hi, wondering if it's possible to just buy a piece of these.
Unfortunately, No parts are or will be available for sale or warranty.
Sorry.


Hi, i would also need 8AA for 2D Mag (9,6V) if possible...
As of today, (April 12th-2018) only few 4AA and 16A battery holders are available. Once remaining item sold out, this thread will be closed.
All items listed in post #1 are discontinued and no more will be reproduced.
 
Last edited:

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]
 

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]
 

Cascadien573

New member
Joined
Jun 20, 2021
Messages
3
order for cascadien573
1x Black 8AA to 2D (4.8 volt) $37
$7
shipping to us
total $44.00 :paypal: thanks in advance!
Transaction ID 4UG08270MP554305S
 
Last edited:

fivemega

Well-known member
CPF Supporter
Joined
Jan 28, 2003
Messages
5,131
Location
California
White 16AA to 4D (19.2 volt) $42 (AVAILABLE)

White 4AA to 1D (4.8 volt) $36 (AVAILABLE)

White 4x14670 to 1.25D (14.8 volt) $36 (AVAILABLE)

Black 8AA to 2D (4.8 volt) $37 (AVAILABLE)

Black 4x14670 to 1.25D (7.4 volt) $36 (AVAILABLE)
 
Top