Sold/Expired 6 shooter / little monster titanium and tritium creations

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Hello all! I am here once again offering my creations for sale. In case you do not remember or are new I am making all of these by hand out of 6AL4V Titanium on manual machines. They are all made in a high polish finish unless you the customer want it another way. I am also offering anodizing now if that is something that you are interested in. The lanterns are all loaded with 3 x 23 sized vials and are held in place by self locking set screws that have holes through them so the light can be viewed from the bottom of the lantern as well. This means that the vials are replaceable should you choose to change the color at some point.

I am now including a nice titanium split ring and clip with the purchase of any lantern that has a stem. I was charging for these previously because I was buying them one at a time but I now have plenty of them and am including them with the sale. These can be seen in most of the pics.

Prices are as follows.....

6 shooter lanterns are $250.
picture.php


picture.php


picture.php


picture.php


picture.php
 
Last edited:

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
SALES

1) s142nv = NEW STYLE 6 SHOOTER/ALL GREEN, SHIPPED
2)
Johngreico = NEW STYLE 6 SHOOTER / ICE BLUE AND WHITE, SHIPPED
3) Gratefuljellyphish = Mega Monster Lantern / Rainbow, SHIPPED
4) stingray3 = Mega Monster Lantern / ICE BLUE, SHIPPED
 
Last edited:

socom1970

Well-known member
Joined
Sep 16, 2004
Messages
1,333
Location
The Heartland of America
A big two thumbs-up for DKlaser! :twothumbs

I bought a couple of his 9-shooters lanterns and one of only two blue trit globe lights he's ever done... absolutely beautiful in every way. I love his work, his quality, his fit and finish on his creations. They are real treasures for me to enjoy. And he's great to work with as well. Buy with confidence!!!:thumbsup:

Richard, glad to see you here.:bow: :)
 
Last edited:

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Aluminum is too soft for these. Brass is a possibility but it's more the labor that determines the price than the material. Unless you want It made out of gold or something, lol

Thanks for the kind words!
 
Last edited:

nfetterly

Well-known member
Supporter
Joined
Oct 17, 2008
Messages
3,764
Location
Cincinnati area, but lots of travel
Dklaser is a pleasure to deal with, I've bought a couple of his creations, my daughter loves here pink & green "4 shooter" (early one...). He's always been great with communication as well!! Highly recommended.

I've had a six shooter on my keys for ~3 years now.
 

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Email sent!

and AWESOME pics! Thanks for those! Thanks again to everyone. I try to deal with everyone with the same responsiveness and attention to detail as I would want.
 
Last edited:

stingray3

Well-known member
Joined
Oct 19, 2014
Messages
947
Location
USA
These are by far the best lanterns ever made......

DSCF4571_1.jpg


DSCF4583.jpg


DSCF4119.jpg
 
Last edited:

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
No :( those vials are long gone from what I know. Give me a day or two to check something out though.
 

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Ok, the 4 x 25 vials that were used for the 6 shooter magnum are scarce or just flat out not available. There is a new size that is 3.5 x 25. I can do something with these for sure if anyone is interested.
 

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Just finished this up for a customer, I was not wild about the ano until it was done. I really like the whole piece.

picture.php


picture.php


picture.php


picture.php
 

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
I lucked into that one in a trade recently. Last 18mm sphere I expect to see. Especially in green.
 

Supergreensol

Member
Joined
Nov 25, 2014
Messages
6
Hey DK, should you come across any other spheres in trade or sale, I would appreciate it if you would drop me a line. I've been searching for some for over a year now, and apparently I just missed the last two that [email protected] found in his desk drawer last week because I don't check in here super often. :(:(:( It's for a gift for my fiancé that I designed. Since you do fabrication work as well I'd be interested in talking to you about the rest of the project if either you or I could track one down. Thanks!
 

DKlaser

Well-known member
Joined
Sep 23, 2011
Messages
253
Will do for sure. I definitely have my eyes out for them. I am willing to buy or trade for these if anyone has any.
 
Top