[size=+5]
Hi folks,
These adapters are patent pending and ready to ship now.
9x14500 (protected) lithium ion to use in stock 3D for WA1185 or WA1331 operation. These adapters are connected in serial/parallel and made by black plastic for easy to recognize.
6x14500 (protected) lithium ion to use in stock 2D for WA1111 or ROP HOLA operation. These adapters are connected in serial/parallel and made by black plastic for easy to recognize.
All batteries in black adapters are installed in same direction. Positive to knurling nut, negative to charging jack side.
9AA to 3D NiMH white adapters to power up an WA1185 or WA1331
6AA to 2D NiMH white adapters to power up an WA1111 or ROP
All batteries in white adapters are installed in different direction. Please follow Positive and Negative marks printed as P and N
All adapters come with female tail jack connector (installed) and I will include male jack too. [size=+1]Batteries NOT included[/size]
Remember, center pin of charging jack is POSITIVE
It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace. I do NOT recommend Bateryspace.
Please do not use two of these adapters in same flashlight for higher voltage.
I also have some bi-pin WA1185 which can be overdriven by 9AAs in 3D M*g and Pelican 3854 in sealed pack (Hi & Low)
9x14500 to 3D $38 for first adapter. Each additional 9x14500 $36 (NOT AVAILABLE)
6x14500 to 2D $37 for first adapter. Each additional 6x14500 $35 (NOT AVAILABLE)
9AA to 3D $40 for first adapter. Each additional 9AA adapter $39 (NOT AVAILABLE)
6AA to 2D $39 for first adapter. Each additional 6AA adapter $38 (NOT AVAILABLE)
Dual function aluminum reflector $25 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Gold plated ceramic socket $28 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1185 $6 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1111 $9 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1274 $6 each (OUT OF STOCK)
Pelican 3854 $10 (each pack) (WITH PURCHASE OF BATTERY HOLDER ONLY)
Boro lens $5.5 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
$6 shipping to States for up to 3 adapters of any kind, then add $0.50 for each additional one.
$7 shipping to international destination for up to 2 adapters of any kind, then add $1 for each additional one.. (No tracking available)
No additional shipping for bulbs and or reflectors if purchased with battery holders.
Paypal to: [size=+1]DO NOT PAY[/size]
Please PM me for other type of payment.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
Example: for 2 9x14500 to 3D and 1 6AA to 2D
Any question or comment welcome.
CLOSED
[/size]Hi folks,
These adapters are patent pending and ready to ship now.
9x14500 (protected) lithium ion to use in stock 3D for WA1185 or WA1331 operation. These adapters are connected in serial/parallel and made by black plastic for easy to recognize.
6x14500 (protected) lithium ion to use in stock 2D for WA1111 or ROP HOLA operation. These adapters are connected in serial/parallel and made by black plastic for easy to recognize.
All batteries in black adapters are installed in same direction. Positive to knurling nut, negative to charging jack side.
9AA to 3D NiMH white adapters to power up an WA1185 or WA1331
6AA to 2D NiMH white adapters to power up an WA1111 or ROP
All batteries in white adapters are installed in different direction. Please follow Positive and Negative marks printed as P and N
All adapters come with female tail jack connector (installed) and I will include male jack too. [size=+1]Batteries NOT included[/size]
Remember, center pin of charging jack is POSITIVE
It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace. I do NOT recommend Bateryspace.
Please do not use two of these adapters in same flashlight for higher voltage.
I also have some bi-pin WA1185 which can be overdriven by 9AAs in 3D M*g and Pelican 3854 in sealed pack (Hi & Low)
9x14500 to 3D $38 for first adapter. Each additional 9x14500 $36 (NOT AVAILABLE)
6x14500 to 2D $37 for first adapter. Each additional 6x14500 $35 (NOT AVAILABLE)
9AA to 3D $40 for first adapter. Each additional 9AA adapter $39 (NOT AVAILABLE)
6AA to 2D $39 for first adapter. Each additional 6AA adapter $38 (NOT AVAILABLE)
Dual function aluminum reflector $25 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Gold plated ceramic socket $28 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1185 $6 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1111 $9 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
Bi-pin WA1274 $6 each (OUT OF STOCK)
Pelican 3854 $10 (each pack) (WITH PURCHASE OF BATTERY HOLDER ONLY)
Boro lens $5.5 each (WITH PURCHASE OF BATTERY HOLDER ONLY)
$6 shipping to States for up to 3 adapters of any kind, then add $0.50 for each additional one.
$7 shipping to international destination for up to 2 adapters of any kind, then add $1 for each additional one.. (No tracking available)
No additional shipping for bulbs and or reflectors if purchased with battery holders.
Paypal to: [size=+1]DO NOT PAY[/size]
Please PM me for other type of payment.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
It is [size=+2]necessary[/size] to post your request here for ducumentation and same information including your CPF handle in paypal note.
Example: for 2 9x14500 to 3D and 1 6AA to 2D
Any question or comment welcome.
Last edited: