• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired All SOLD! Aleph Tailcap, switches, FINAL PRICEDROPS b4 removal

cryhavok

Enlightened
Joined
Nov 21, 2005
Messages
871
Location
Orlando, FL
EVERYTHING SOLD. THANKS!

Hey everyone,

Here are some Aleph parts that I have for sale:



Note: all the switches will work with Surefire E-series lights. The McE2S will give your light a similar operation as the Surefire L1 (soft press - low; hard press - high; twist - constant low; twist more - constant high).

1: McE2S 2-stage flat-top switch. 15ohm resistor. Comes with flat-top switch boot and retaining ring. SOLD

2: Same as #1. $30$SOLD

3: McE2S 2-stage standard switch. 15ohm resistor. Comes with retaining ring but you will need to supply your own switch boot (same one as McClicky switch) $30$SOLD

4: Flat-top tailcap bare aluminum. Perfect condition. $12 $SOLD

Buy a switch and get the tailcap for only $5 extra!

5: Cree MC-E M-bin WC 430 lumens aleph LE. The LED is being driven by a BiFluPIC (2.2A burst) using the standard UI. Insanely bright on burst (recommended for only short periods of use on Burst). WITHDRAWN

IMG_0008-5.jpg


Also for sale is 1 new Cree MC-E M-bin WC 430 lumen led on a 20mm star. Each die is individually accessible on this star. -$27 $24 $20 :drool:SOLD

2 unused boomerang reflectors SS (tightest spot) - both for
$9 $5 SOLD

Buy the MC-E LED and get the boomerang reflectors for FREE


All prices include shipping in CONUS via first class mail. I am willing to ship international, but buyer is responsible for shipping costs. Paypal preferred, MO ok. +3% if using CC.
 
Last edited:
Re: Aleph MC-E LE, Tailcap, switches

Cree MC-E, Does it work well with a 27-XR and a 38MM reflector?
 
Re: Aleph MC-E LE, Tailcap, switches

Cryhavoc,

You upgraded my Aleph a couple of years ago to a P4 LED and modified the reflector so that it could fit. I still use it to this day!

Obviously the LE would fit into my Aleph but will the reflector have to be modified again to fit the quad die LED?
 
Re: Aleph MC-E LE, Tailcap, switches

Lawrence,

Glad the LE's are still treating you well!


The MC-E is notorious for being difficult to focus, especially with smaller reflectors. If this was put in a Aleph 1 or 2, I wouldn't expect much of a hotspot but it would have killer flood.

With the Aleph 3, it can focus reasonably well but will have a small doughnut in the center and very bright flood.
 
Re: Aleph MC-E LE, Tailcap, switches

ILL take number 1 as per pm;)
 
Re: Aleph MC-E LE, Tailcap, switches

The MC-E is notorious for being difficult to focus, especially with smaller reflectors. If this was put in a Aleph 1 or 2, I wouldn't expect much of a hotspot but it would have killer flood.

I have tried the MC-E in an Aleph 2 with a McR20-S. It has a defined hotspot with plenty of flood and a faint donut hole.
 
Re: Aleph MC-E LE, Tailcap, switches

Thanks for the reply, Nake. I only have an Aleph 3 head, so I was speculating how the LED would work in the smaller heads.

I suppose you could use a Boom reflector (with a little shaving) in an aleph 2 head for a great work light.
 
Re: Aleph MC-E LE, Tailcap, switches

I actually had some shots of the MC-E LE in an Aleph 3 head:

Note: I had to grind down the back fo the reflector a bit to get the LED in the correct focal plane.
IMG_0008.jpg


All shots taken with exposure set to -2EV and A3 on left running a puny IMR16340. Note that the low and medium levels can be user configured. These beamshots aren't very good as they only show the hotspot and not the incredibly bright spill. :sick2: Lights are approximately 10 feet from white wall.

Lumens Factory E1R 90 lumens in a E2 host on a 17670.
MC-E on low.
LFA3low.jpg


A3 on user defined medium
LFA3med.jpg


A3 on burst
LFA3high.jpg


A3 on low vs. E2DL low
KL2A3low.jpg


A3 medium vs. E2DL on high
KL2A3med.jpg


A3 burst vs. E2DL on high
KL2A3high.jpg


A3 on low vs. Fenix P1D Q5 on low
P1DA3low.jpg


A3 on medium vs. P1DQ5 on medium
P1DA3med.jpg


A3 on burst vs. P1D on burst
P1DA3high.jpg
 
Re: Aleph MC-E LE, Tailcap, switches

:paypal: Cheers ;) for Number 1
 
Re: Aleph MC-E LE, Tailcap, switches - PRICEDROPS

Bump with a special offer:

Buy either switch and get the Tailcap for only $5 extra :D

Buy the bare MC-E star and get both boom reflectors FREE
 
Re: Aleph MC-E LE, Tailcap, switches - FINAL PRICEDROPS b4 removal

Final pricedrops to get these moving! :poke:
 
Re: Aleph Tailcap, switches, MC-E star - FINAL PRICEDROPS b4 removal

I'll take the MC-E star
PM sent
 
Last edited:
Re: Aleph Tailcap, switches, FINAL PRICEDROPS b4 removal

PM sent on items 2, 3, and 4
 
Top