Anduril 2 guidance not a newbie just looking for advanced setup help

abarth_1200

Flashlight Enthusiast
Joined
Jun 16, 2008
Messages
1,034
Location
Scotland
Hi, so I've been using Anduril torches for a good while now, I've learned all basic and some advanced functions all easy to sort now without a chart, but I'm seeing a few options I've missed out on.
Such as soft start, I've tried the 10h from on to get to it but I only have 4 config options here it seems.
Also looking for set up a better moonlight level 2 when it's on lockout, what's the process again? Any decent YouTube videos to help refresh the harder stuff?? Thanks everyone for reading
 
Such as soft start, I've tried the 10h from on to get to it but I only have 4 config options here it seems.
Soft Start is a feature on newer Anduril builds, your light would need to be reflashed to newer firmware.
Also looking for set up a better moonlight level 2 when it's on lockout, what's the process again?
online manual says:

"The brightness in lockout mode has two levels:

  • 1H: Light up at the lowest floor level.
  • 2H: Light up at the highest floor level.(or the manual mem level, if there is one)"
 
Great thing about Anduril is there's so many settings ; bad thing about Anduril is there's so many settings & now revisions. I got in w/1st Gen And with an IF25a, my "newest" lights use A2v?. I have a flash cable somewhere & would most likely flash every light back to Av1 if I could find it. Except for my duel channel lights. I'm not afraid of the "new" Anduril it just does waaaaaay more things than I need or want. Truth is I'd like to see the next Av?? be a rollback to a core settings of even fewer options than A.o started with as I use my light for mostly work & the duel channel took a couple of battery charges & 2 pages of notes to sort out the way I wanted. Worth it? YES P.I.T.A.? HELL YES !! I dread the thought of having to use the notes to reset a duel channel light, much less start over w/a new version
 
why is there a strike thru in the last 1/2 of my last post??
 
Soft Start is a feature on newer Anduril builds, your light would need to be reflashed to newer firmware.

online manual says:

"The brightness in lockout mode has two levels:
  • 1H: Light up at the lowest floor level.
  • 2H: Light up at the highest floor level.(or the manual mem level, if there is one)"
Ah gotcha, didn't think I had seen it before
 
What's the purpose of that action?
It is just a glitch in the CPF text formatting function. It seems to happen when posting long paragraphs.

It has happened to me also. Easily fixed by editing the text, to remove the Strikethru formatting. I take it as a hint to use shorter paragraphs ;-)
 
Last edited:
Back
Top