Any neutral or warm white LEDs > Q3?

[Cemoi]

Following a widespread opinion on CPF about the 5A chromaticity bin very good color rendition, I bought one year ago a few XR-E Q2 (from ledlightingsupply) and a few Q3 from dereelight. It seems that these were the higher flux you could get at that time.
Time to order some more now, so I'm wondering if there has been any improvement in flux bins for 5A or slightly warmer tints.
And where to order such high flux, neutral or warm white LEDs (MCPCB mounted)?

 

[xenonk]

Q4 for XR-E/XP-E. I don't know the max bin for neutral XP-Gs as they're not widely available yet, but it should be higher.

Dereelight is selling neutral emitters again, this time Q4-5A XR-Es on 14mm boards.

 

[Cemoi]

Dereelight is selling neutral emitters again, this time Q4-5A XR-Es on 14mm boards.

Thanks for pointing this out to me, as I haven't checked on his website for a long time. Unfortunately he doesn't seem to be offering a 5-unit discount, but I'll contact him directly on this aspect.

 

[Cemoi]

I don't know the max bin for neutral XP-Gs

According to the product description and to the XP series binning and labelling datasheet, the XP-G is currently only available in cool white.

 

[lolzertank]

Q4 for XR-E/XP-E, and roughly Q5-R2 for neutral white Rebel ES (depends on what forward voltage you get). XP-G should be R2-R3 when it comes out later this year.

 

[Cemoi]

roughly Q5-R2 for neutral white Rebel ES

Like this one?
Unfortunately, the color rendering index is 70 only.

 

[bshanahan14rulz]

sb used to sell 5B's right? Wish someone'd get some of these :tinfoil:

 

[Blindasabat]

Cree Neutral (5A-6C) are not much better than that at 75. It would be very hard to tell the difference. And no Cree rings. I use Neutral Cree to replace existing Cree, and Neutral Rebel 100/K2 TFFC 180 to replace SSC and Luxeon.

Like this one?
Unfortunately, the color rendering index is 70 only.

 

[Black Rose]

sb used to sell 5B's right? Wish someone'd get some of these :tinfoil:

I bought some Q3 5C LEDs from Shiningbeam not too long ago.

If my parts from DX ever show up, I'll be making some P60 drop-ins for my lights.

 

[xenonk]

According to the product description and to the XP series binning and labelling datasheet, the XP-G is currently only available in cool white.

Availability of the warm/neutrals is slated for the end of the year, and until then we have little information on what flux bins we can expect. Hopefully the neutrals will be available at up to R4 alongside the S2 cool whites.