-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Sold/Expired ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES** (SOLD OUT)
- Thread starter Nanomiser
- Start date
Help Support CPF:
Help Support Candle Power Flashlight Forum
Alan B
Flashlight Enthusiast
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
PayPal transactions less than 60 days old can be partially (or fully) refunded, and the fees are also refunded appropriately so there is no loss.
It looks like you are correct. I sent more the first time than what I thought I did.
I have a couple options for you to handle this.
One, you could just toss in a extra lens or bezel of your choice.
Two, you can just send the $$ back through paypal or in the package. Please subtract what you lost in the transaction so you are not out of any $$ because of my mistake.
Thank you for bringing that to my attention.
PayPal transactions less than 60 days old can be partially (or fully) refunded, and the fees are also refunded appropriately so there is no loss.
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
Alan is correct; paypal pretty well takes care of all the calculations and spits out the right ammount. I don't pay those transaction fees for nothing 🙂
QtrHorse: You are welcome; refund issued :thumbsup:
3rdrock: Refund also issued and your order will ship out Tuesday 02/17 :thumbsup:
I know these orders are shipping a bit out of sequence, but please bear with me and I will get to all of them in a timely manner.
Thank you 🙂
Alan is correct; paypal pretty well takes care of all the calculations and spits out the right ammount. I don't pay those transaction fees for nothing 🙂
QtrHorse: You are welcome; refund issued :thumbsup:
3rdrock: Refund also issued and your order will ship out Tuesday 02/17 :thumbsup:
I know these orders are shipping a bit out of sequence, but please bear with me and I will get to all of them in a timely manner.
Thank you 🙂
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
Awesome thanks nano! I'm looking forward to it. Icarus is going to build me a host and once that is done I'll post pictures. Thanks again for all the work you put into this. lovecpf
Awesome thanks nano! I'm looking forward to it. Icarus is going to build me a host and once that is done I'll post pictures. Thanks again for all the work you put into this. lovecpf
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
You are very welcome!
On that note I was wondering if anyone knows where I can get a light engine, prefferably drop-in, for one of my aspherical hosts C or D? I curently have the KD Q5 and I think a Tera Lux drop-in, but I'm looking for something with more power. Any ideas 😕
You are very welcome!
On that note I was wondering if anyone knows where I can get a light engine, prefferably drop-in, for one of my aspherical hosts C or D? I curently have the KD Q5 and I think a Tera Lux drop-in, but I'm looking for something with more power. Any ideas 😕
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
I think the most powerful dropins that you can buy are the Malkoff dropins but these have SSC P4s. Why don't you build your own. I used a HDS-heatsink, a Cree R2 and a SOB 1000 converter.
rayman
I think the most powerful dropins that you can buy are the Malkoff dropins but these have SSC P4s. Why don't you build your own. I used a HDS-heatsink, a Cree R2 and a SOB 1000 converter.
rayman
cheetokhan
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
Why not drop in a MC-E? I know it gives you a funky 4 spot beam, but so what? It's bright!:huh:
Why not drop in a MC-E? I know it gives you a funky 4 spot beam, but so what? It's bright!:huh:
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
One more :twothumbs up for making these available to us with the spirit of the early days of CPF! :bow: :bow: :bow: lovecpf
I can't wait to build my next aspheric Maglite with the goodies you're going to mail me. :wave:
One more :twothumbs up for making these available to us with the spirit of the early days of CPF! :bow: :bow: :bow: lovecpf
I can't wait to build my next aspheric Maglite with the goodies you're going to mail me. :wave:
Last edited:
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
I actually have plans to build my own, but time is such a rare commodity these days. I also have Setapong's HDS-SSC-P7-Heatsink and a P7 to mount all that's missing is the regulator PCB. What driver do I need for a P7? I would like to turn it into a drop-in like Malkoff's here. How hard is that to do?
I actually have plans to build my own, but time is such a rare commodity these days. I also have Setapong's HDS-SSC-P7-Heatsink and a P7 to mount all that's missing is the regulator PCB. What driver do I need for a P7? I would like to turn it into a drop-in like Malkoff's here. How hard is that to do?
donn_
Flashaholic
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
Probably not hard, but I copped out and bought the Malkoff drop-in. His stuff is so good, it's hard to justify tryin to do it myself.
I have it running through an aspheric, and the results are exceptional.
Just waiting for those bezels, patiently...to make the light(s) right.:naughty:
Probably not hard, but I copped out and bought the Malkoff drop-in. His stuff is so good, it's hard to justify tryin to do it myself.
I have it running through an aspheric, and the results are exceptional.
Just waiting for those bezels, patiently...to make the light(s) right.:naughty:
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
I'm leaning towards the Malkoff P7 myself, but finding tough to fork out what he's asking. It sounds like it maybe worth it to have a high quality turn-key engine. Tell me is the reflector he is offering with the drop-in a modified plastic mag or machined aluminum?
Hang in there your bezels are coming very soon 😉
I'm leaning towards the Malkoff P7 myself, but finding tough to fork out what he's asking. It sounds like it maybe worth it to have a high quality turn-key engine. Tell me is the reflector he is offering with the drop-in a modified plastic mag or machined aluminum?
Hang in there your bezels are coming very soon 😉
donn_
Flashaholic
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
It's a plastic reflector. It works very well, but, of course, you don't need it with the aspheric.
It's a plastic reflector. It works very well, but, of course, you don't need it with the aspheric.
Nanomiser
Enlightened
donn_
Flashaholic
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
That's a matter of opinion. The P7 works well, with a large and intense hotspot. I don't focus it all the way down to projecting the emitter's image, but leave it a bit looser. It's the best P7 hotspot I've seen so far, including in a variety of 3" heads.
That's a matter of opinion. The P7 works well, with a large and intense hotspot. I don't focus it all the way down to projecting the emitter's image, but leave it a bit looser. It's the best P7 hotspot I've seen so far, including in a variety of 3" heads.
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
Is that a Malkoff?
Is that a Malkoff?
cnjl3
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
for final payment due.
for final payment due.donn_
Flashaholic
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
No, that's a stained glass window at the Abbey in Castle Combe.😀
No, that's a stained glass window at the Abbey in Castle Combe.😀
Nanomiser
Enlightened
Re: ASPHERICAL LENS PROTECTIVE BEZELS **1ST RUN***SALES**
HEHEHEHEH 🙄
HEHEHEHEH 🙄
